VIS Racing SRT Carbon Fiber Hood: Dodge Ram 2009 - 2012
VIS Racing SRT Carbon Fiber Hood
09-12 Dodge Ram
VIS Carbon Fiber Hoods and Trunks are made from the finest carbon fiber material available. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer utilizes a 100% ISO certified, Grade A carbon fiber material. The carbon fiber material is bonded to the hood using a high grade epoxy resin, and then finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating to ensure a high gloss finish. Marrying aesthetics and functions, we pioneered the use of one-piece, smooth underside shell which complements the fine finish on top, and at the same time strengthens the products structural integrity. The edges of each hood or trunk are meticulously smoothed by hands to insure high-quality finish all around. The result is a carbon product that is unparalleled and excels above all else in quality, durability, and aesthetics. All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
FRP Products Detail:
All VIS fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass (***unless noted). All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
CFRP Products Detail:
VIS Carbon Fiber Products are made from the finest carbon fiber available. Each piece is protected with a UV coating which allows it to hold its high gloss finish. VIS Carbon Fiber products have a tight carbon weave and use Grade-A carbon fiber only. Intended for OFF ROAD use only.
Painting VIS Racing Aerodynamics Products:
VIS Racing brand aerodynamics will follow traditional FRP (fiberglass) preparation where every visible inch of the finish will need to be sanded to eliminate any blemishes including gelcoat chips, scratches, pin holes etc. By block sanding the finish you will be able to see the straightness of the product as well as anything that will need to be glazed with finish body filler. The finish on VIS Racing brand aerodynamics is just a basic primer coat that was used to help the part pop free from the mold when it was originally laid up. This is not a surfacing layer intended to be directly painted or to be installed without paint as it lacks UV protection. The more time spent on prep the better the finished install and quality of the paint job will be. Once the part has been totally prepped we suggest using a high build primer suitable for FRP to be sprayed and wet sanded before the base coat and clear coat is applied. High build primer will provide a thickness of finish applied on top of the part that can be easily sanded and checked for perfection.
Repairing VIS Racing Aerodynamics Products:
VIS Racing brand aerodynamics are completely repairable if you have an accident or cause damage to your vehicle after your parts are installed. These parts are treated as FRP (fiberglass) and can be repaired using fiberglass resin, mat and body filler.
- Item Requires Shipping
- 150.0 lbs.
- Ships by oversize freight. Please allow 48-72 hours to ship out.
Total Reviews (0)
Write the First Review!
You must login to post a review.