{"title":"Hemi Shocks","description":"\u003cp\u003eOptimize your ride with Hemi shocks designed specifically for your vehicle’s suspension needs. Built for your Chrysler, Dodge, Ram, or Jeep Hemi-powered platform, these shocks deliver enhanced handling, improved response, and better control on and off the road. Whether you’re upgrading for street performance or off-road capability, our selection covers a range of fitments tailored to your model and year.\u003c\/p\u003e\n\u003cp\u003eIn this collection, you’ll find high-quality aftermarket shocks engineered to complement your Hemi’s suspension setup. Expect improved ride comfort, reduced body roll, and consistent performance under load or rough terrain. Choose from monotube, twin-tube, and performance shocks to match your driving style and vehicle demands.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Chrysler, Dodge, Ram, Jeep Hemi platforms\u003c\/li\u003e\n\u003cli\u003eImprove handling, stability, and ride quality\u003c\/li\u003e\n\u003cli\u003eSuitable for street, performance, and off-road use\u003c\/li\u003e\n\u003cli\u003ePrecision fit for your specific model and year range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eShop Hemi shocks and suspension upgrades for your Hemi-powered vehicle at FastHemis.\u003c\/p\u003e","products":[{"product_id":"st-suspensions-sport-shocks-300c-charger-magnum-5-7l-hemi-2wd-2005-2010","title":"ST Suspensions Sport Shocks: 300C \/ Charger \/ Magnum 5.7L Hemi 2WD 2005 - 2010","description":"\u003ch3\u003eST Suspensions Sport Shocks\u003c\/h3\u003e\u003cp\u003e2005–2010 Chrysler 300C \/ Dodge Charger \/ Magnum 2WD 5.7L Hemi\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e47063\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eST Suspensions Sport Shocks are engineered specifically for the 2005 to 2010 Chrysler 300C, Dodge Charger, and Magnum equipped with the 5.7L Hemi engine in 2WD configurations. Designed to complement lowering springs, these shocks address the common issues of harsh ride quality, bottoming out, and premature shock wear that occur when using stock shocks with lowered suspensions. By incorporating advanced valve tuning, ST Suspensions Sport Shocks reduce shock travel to optimize handling and performance without sacrificing ride comfort. This set of four shocks offers a balanced upgrade for enthusiasts seeking improved suspension dynamics and durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eST Suspensions Sport Shocks deliver a precise blend of performance and comfort tailored for lowered Chrysler 300C, Dodge Charger, and Magnum models. Key features include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdvanced valve tuning to reduce shock travel and enhance handling response\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for use with lowering springs to prevent harshness and bottoming out\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand the rigors of lowered suspension setups\u003c\/li\u003e\n\u003cli\u003eMaintains exceptional ride comfort despite performance-oriented tuning\u003c\/li\u003e\n\u003cli\u003eSet includes all four shocks for complete suspension upgrade\u003c\/li\u003e\n\u003cli\u003eDirect fitment for 2WD 5.7L Hemi Chrysler 300C, Dodge Charger, and Magnum (2005–2010)\u003c\/li\u003e\n\u003cli\u003eImproves vehicle stability and cornering precision\u003c\/li\u003e\n\u003cli\u003eReduces premature shock wear common with stock shocks on lowered vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Design:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eST Suspensions Sport Shocks are built with high-quality materials and precision engineering to ensure long-lasting performance. The internal valving is carefully calibrated to control shock travel and damping characteristics, providing a smooth yet controlled ride. The robust construction resists wear and tear from lowered suspension stresses, while the design maintains factory mounting points for easy installation. This combination of durability and advanced tuning makes these shocks a reliable upgrade for performance-minded drivers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Fitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese shocks are designed as direct replacements for the factory units on 2005–2010 Chrysler 300C, Dodge Charger, and Magnum models with 2WD and the 5.7L Hemi engine. Installation requires no modifications and can be completed using standard suspension tools. They are optimized for use with lowering springs, ensuring proper suspension geometry and preventing issues such as bottoming out or harsh ride quality often experienced with stock shocks on lowered vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 4 ST Suspensions Sport Shocks (front and rear)\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware included\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIdeal For:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese sport shocks are ideal for Chrysler 300C, Dodge Charger, and Magnum owners who have installed lowering springs and want to improve suspension performance and ride quality. Enthusiasts seeking enhanced handling, reduced shock wear, and a more controlled driving experience without sacrificing comfort will benefit from this upgrade. Perfect for street performance and daily driving applications where lowered stance and improved suspension dynamics are desired.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":43762599330004,"sku":"47063","price":779.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0018305_0248_47063_f8cc02c1-4194-449c-b636-a1f8dcab1114.webp?v=1771903044"},{"product_id":"kyb-excel-g-rear-shocks-chrysler-300-dodge-challenger-charger-awd-2011-2024","title":"KYB Excel G Rear Shocks: Chrysler 300 \/ Dodge Challenger \/ Charger AWD 2011 - 2023","description":"\u003ch3\u003eKYB Excel G Rear Shocks\u003c\/h3\u003e\u003cp\u003e11-24 Chrysler 300 \/ Dodge Challenger \/ Charger\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e551136\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe KYB Excel G Rear Shocks are engineered to restore performance and comfort to your vehicle’s suspension. Designed as direct replacements for worn shocks or struts, these twin-tube shocks offer precise handling, superior road control, and improved ride quality. Each unit is calibrated to the specific application, ensuring optimal damping and stability, even under heavy loads or rough roads.\n\nPatented check-valve technology maintains consistent performance regardless of driving conditions, providing a balance of comfort and control often exceeding original equipment. Built with durable, high-quality components, the KYB Excel G Rear Shocks offer long-lasting reliability, improved vehicle responsiveness, and a smoother, safer driving experience.\n\n\u003cstrong\u003eNote\u003c\/strong\u003e: For complete replacement, select quantity 2 to cover both left and right sides.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwin-tube replacement shocks and struts\u003c\/li\u003e\n\u003cli\u003ePatented check-valve technology for consistent damping\u003c\/li\u003e\n\u003cli\u003eCalibrated for each specific vehicle application\u003c\/li\u003e\n\u003cli\u003eImproved ride comfort, stability, and handling\u003c\/li\u003e\n\u003cli\u003eRestores responsiveness to worn suspension systems\u003c\/li\u003e\n\u003cli\u003eBuilt to match or exceed original equipment quality\u003c\/li\u003e\n\u003cli\u003eDurable, long-lasting construction\u003c\/li\u003e\n\u003cli\u003eIdeal for vehicles with AWD rear suspension\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYB","offers":[{"title":"Default Title","offer_id":44002976891092,"sku":"551136","price":149.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0002174_0993_F143839263_948f55b9-ae66-423a-80a9-0ba2147aef8a.webp?v=1771902890"},{"product_id":"koni-str-t-rear-shocks-300-challenger-charger-magnum-2005-2010-exc-awd-self-leveling","title":"Koni STR.T Rear Shocks: 300 \/ Challenger \/ Charger \/ Magnum 2005 - 2010 (Exc. AWD \u0026 Self Leveling)","description":"\u003ch3\u003eKoni STR.T Rear Shocks\u003c\/h3\u003e\u003cp\u003e05-10 300 \/ Challenger \/ Charger \/ Magnum (Exc. AWD \u0026amp; Self Leveling)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e8050 1049\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKoni STR.T Rear Shocks provide a perfect balance of comfort, performance, and durability. Engineered for full-size sedans, SUVs, and trucks, these monotube gas-pressure shocks feature fixed-rate damping tailored to deliver a sporty, controlled ride while reducing body roll and improving handling. The bright orange finish adds a performance-inspired visual appeal to the rear suspension.\n\nIdeal for OE replacement or performance upgrades, STR.T shocks work seamlessly with lowered springs and other suspension enhancements. Non-adjustable yet engineered with Koni’s decades of experience in sports damping, these shocks offer a precise and predictable ride. Sold individually, two shocks are required for both rear sides. Backed by Koni’s limited lifetime warranty, these shocks combine performance, reliability, and style.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty monotube gas-pressure rear shock\u003c\/li\u003e\n\u003cli\u003eFixed-rate damping for improved handling and reduced body roll\u003c\/li\u003e\n\u003cli\u003eIdeal for OE replacement or vehicle performance upgrades\u003c\/li\u003e\n\u003cli\u003eComplements lowered springs\u003c\/li\u003e\n\u003cli\u003eNon-adjustable design for reliable, consistent performance\u003c\/li\u003e\n\u003cli\u003eBright orange finish for a sporty look\u003c\/li\u003e\n\u003cli\u003eSold per shock; select two for both rear sides\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Koni North America\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KONI","offers":[{"title":"Default Title","offer_id":43762641338580,"sku":"8050 1049","price":90.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0018085_2674_80501049_d37bafc0-ce51-4497-8854-63b1d85c94e4.webp?v=1771903033"},{"product_id":"koni-str-t-front-shocks-300-challenger-charger-magnum-2005-2010-exc-awd-srt8","title":"Koni STR.T Front Shocks: 300 \/ Challenger \/ Charger \/ Magnum 2005 - 2010 (Exc. AWD \u0026 SRT8)","description":"\u003ch3\u003eKoni STR.T Front Shocks\u003c\/h3\u003e\u003cp\u003e05-10 300 \/ Challenger \/ Charger \/ Magnum (Exc. AWD \u0026amp; SRT8)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e8250 1007\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKoni STR.T Front Shocks deliver precise, sporty performance while maintaining comfort and durability. Designed for full-size sedans, SUVs, and trucks, these monotube gas-pressure shocks provide fixed-rate damping tailored to improve handling and reduce body roll. Their bright orange finish adds a visual performance accent to the front suspension.\n\nPerfect for OE replacement or vehicle upgrades, STR.T shocks work seamlessly with lowered springs and other suspension enhancements. Non-adjustable yet engineered with Koni’s expertise in sport damping, these shocks ensure consistent, reliable performance for everyday driving or spirited use. Sold individually, two shocks are needed for a complete front setup. Backed by Koni’s limited lifetime warranty, they offer long-lasting quality and style.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty monotube gas-pressure front shock\u003c\/li\u003e\n\u003cli\u003eFixed-rate damping for improved handling and reduced body roll\u003c\/li\u003e\n\u003cli\u003eIdeal for OE replacement or performance upgrades\u003c\/li\u003e\n\u003cli\u003eComplements lowered springs\u003c\/li\u003e\n\u003cli\u003eNon-adjustable design for consistent, reliable performance\u003c\/li\u003e\n\u003cli\u003eBright orange finish for sporty appeal\u003c\/li\u003e\n\u003cli\u003eSold per shock; select two for both front sides\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Koni North America\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KONI","offers":[{"title":"Default Title","offer_id":43762641469652,"sku":"8250 1007","price":141.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0000669_2679_82501007_b3e18a0f-8435-4bd8-adb0-ca3b08b93bdc.webp?v=1771902815"},{"product_id":"bilstein-b6-monotube-front-shocks-300-challenger-charger-2011-2024","title":"Bilstein B6 Perf Monotube Shock Absorber Yellow Paint (FRONT): Fits Challenger \/ Charger \/ 300 2011-2023 RWD","description":"\u003ch1\u003eBilstein B6 Performance Monotube Shock Absorber\u003c\/h1\u003e\n\u003ch2\u003e2011–2023 Dodge Challenger, Dodge Charger, 2011–2024 Chrysler 300 RWD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 24-326421\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 Performance Monotube Shock Absorber is a premium front suspension upgrade designed specifically for rear-wheel-drive Dodge Challenger, Dodge Charger, and Chrysler 300 models from 2011 through 2023 (2024 for the 300). Engineered to replace factory dampers with a direct-fit solution, these shocks enhance vehicle handling, stability, and ride comfort without requiring modifications to your original springs. Ideal for enthusiasts seeking improved control and responsiveness, the B6 shocks deliver a balanced driving experience that excels in spirited street driving and everyday use.\u003c\/p\u003e\n\u003cp\u003eBuilt with Bilstein’s renowned monotube gas pressure technology, these shocks maintain consistent damping performance under demanding conditions, reducing body roll and improving road feedback. The result is a safer, more confident driving experience with sharper cornering and enhanced vehicle dynamics.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 Performance Monotube Shock Absorber combines advanced engineering with durable construction to deliver superior ride quality and handling improvements. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonotube gas pressure design for consistent damping and heat dissipation\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement compatible with original equipment (OE) springs\u003c\/li\u003e\n  \u003cli\u003eVehicle-specific valving tuned for optimal response and road feedback\u003c\/li\u003e\n  \u003cli\u003eReduced body roll and improved cornering stability\u003c\/li\u003e\n  \u003cli\u003eEnhanced ride comfort without sacrificing performance\u003c\/li\u003e\n  \u003cli\u003eDurable yellow powder-coated finish for corrosion resistance and iconic Bilstein styling\u003c\/li\u003e\n  \u003cli\u003eIncludes spring seat for proper installation and fitment\u003c\/li\u003e\n  \u003cli\u003eMeets or exceeds OEM quality and durability standards\u003c\/li\u003e\n  \u003cli\u003eEngineered and tested with German precision for reliability and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 shock absorbers feature a robust monotube design that separates the gas and oil chambers with a floating piston. This construction allows for rapid heat dissipation and consistent damping performance, even during aggressive driving or extended use. The monotube layout also provides a larger piston surface area compared to twin-tube shocks, resulting in more precise control and quicker response to road irregularities.\u003c\/p\u003e\n\u003cp\u003eEach shock is finished in Bilstein’s signature yellow paint, which not only offers a distinctive look but also protects against corrosion and environmental wear. The inclusion of a spring seat ensures a secure and proper fit with OE springs, maintaining factory ride height and suspension geometry. Every unit undergoes rigorous testing to guarantee durability and performance that meets or surpasses original equipment manufacturer (OEM) standards.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eDesigned as a direct bolt-on replacement, the Bilstein B6 front monotube shocks install easily on 2011–2023 Dodge Challenger and Charger models, as well as 2011–2024 Chrysler 300 vehicles equipped with rear-wheel drive. No modifications to the factory springs or suspension components are required, making installation straightforward for professional mechanics or experienced enthusiasts. The shocks come complete with spring seats to ensure proper mounting and alignment.\u003c\/p\u003e\n\u003cp\u003eFor optimal performance and safety, it is recommended to replace shocks in pairs and inspect related suspension components during installation. Using the recommended mounting kit B4-KT1-Z244A00 will help ensure a secure and reliable fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBilstein B6 Monotube Front Shock Absorber (Yellow Finish)\u003c\/li\u003e\n  \u003cli\u003eSpring Seat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 Performance Monotube Shock Absorber is ideal for drivers who want to upgrade their Dodge Challenger, Dodge Charger, or Chrysler 300 with a suspension component that enhances handling precision and ride quality without compromising comfort. Whether you enjoy spirited street driving, daily commuting, or occasional track days, these shocks provide improved stability, reduced body roll, and better road feedback. Enthusiasts seeking a reliable, long-lasting suspension upgrade backed by German engineering will appreciate the balance of performance and durability offered by the B6 series.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45920653279444,"sku":"24-326421","price":147.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/5340_24-326421_1_911e6c62-56a6-48a6-b7a4-9d68737d6612.webp?v=1766378321"},{"product_id":"bilstein-b6-monotube-front-shocks-300-challenger-charger-magnum-2005-2010","title":"Bilstein B6 Perf Shock Absorber Monotube (FRONT): 05-10 Challenger \/ Charger \/ Magnum \/ 300 RWD","description":"\u003ch1\u003eBilstein B6 Performance Shock Absorber Monotube (Front)\u003c\/h1\u003e\n\u003ch2\u003e2005–2008 Dodge Magnum, 2005–2010 Chrysler 300, 2006–2010 Dodge Charger RWD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 24-144773\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 Monotube Front Shock Absorber is engineered to elevate the driving dynamics of your Dodge Magnum, Chrysler 300, or Dodge Charger. Specifically designed for the front suspension of these rear-wheel-drive models, it works seamlessly with the original equipment factory springs to maintain proper ride height and suspension geometry. Whether you’re tackling daily commutes or spirited drives, the B6 shock absorber delivers enhanced handling, improved stability, and increased safety without compromising ride comfort.\u003c\/p\u003e\n\u003cp\u003eIdeal for drivers seeking a balance between performance and comfort, the Bilstein B6 provides superior damping control that reduces body roll and sharpens steering response. Its durable construction ensures long-lasting reliability, making it a smart upgrade for vehicles from 2005 to 2010 within the specified models.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eBilstein’s B6 Monotube Shock incorporates advanced technology and precision tuning to improve vehicle control and driving confidence. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonotube Design:\u003c\/strong\u003e Enhances heat dissipation and maintains consistent damping performance under demanding conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Tuning:\u003c\/strong\u003e Calibrated precisely for the front suspension of 2005–2008 Dodge Magnum, 2005–2010 Chrysler 300, and 2006–2010 Dodge Charger models.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOE Spring Compatibility:\u003c\/strong\u003e Designed to work flawlessly with factory springs, preserving original ride height and suspension geometry.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Yellow Finish:\u003c\/strong\u003e Corrosion-resistant powder coat protects against rust and wear while providing a distinctive appearance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDriver and Passenger Side Fitment:\u003c\/strong\u003e Sold individually and suitable for installation on either front side.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImproved Handling:\u003c\/strong\u003e Reduces body roll and enhances steering precision for safer, more confident driving.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnhanced Safety:\u003c\/strong\u003e Provides superior road contact and stability across a variety of driving conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 shock absorber features a robust monotube gas pressure design that separates oil and gas chambers with a floating piston. This innovative design prevents foaming and ensures consistent damping performance even during extended use or aggressive driving scenarios. The shock body is constructed from high-quality steel and finished with a corrosion-resistant yellow powder coat to protect against rust and wear.\u003c\/p\u003e\n\u003cp\u003eEach shock is engineered with vehicle-specific valving to optimize suspension response for the front end of the Dodge Magnum, Chrysler 300, and Dodge Charger. This precision tuning enhances ride comfort without sacrificing control, delivering a refined and confident driving experience.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Bilstein B6 Monotube Front Shock is straightforward and designed as a direct replacement for the original front shocks on your vehicle. No modifications to suspension components or mounting points are necessary, as these shocks fit precisely with factory springs and hardware. For best results, professional installation is recommended to ensure proper torque specifications and alignment.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Bilstein B6 Monotube Front Shock (driver or passenger side)\u003c\/li\u003e\n  \u003cli\u003eProtective dust boot\u003c\/li\u003e\n  \u003cli\u003eMounting hardware (if applicable)\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 Monotube Shock is perfect for enthusiasts and daily drivers who want to improve their vehicle’s handling and safety without sacrificing ride comfort. It is especially suited for owners of 2005–2008 Dodge Magnum, 2005–2010 Chrysler 300, and 2006–2010 Dodge Charger models seeking a durable, performance-oriented shock absorber that maintains factory ride height and suspension characteristics.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Driver side","offer_id":44001686651092,"sku":"24-144766","price":139.0,"currency_code":"USD","in_stock":true},{"title":"Passenger Side","offer_id":44001686683860,"sku":"24-144773","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/5379_24-144766_1_c83ec24d-356f-45e0-8532-632743292c71.webp?v=1766378294"},{"product_id":"bilstein-b6-monotube-rear-shocks-300-challenger-charger-2011-2023-including-self-leveling","title":"Bilstein B6 Perf Shock Absorber Monotube (REAR): 11-23 Challenger \/ Charger \/ 300 RWD","description":"\u003ch1\u003eBilstein B6 Performance Shock Absorber\u003c\/h1\u003e\n\u003ch2\u003e2011–2023 Chrysler 300, Dodge Challenger, Dodge Charger Rear Suspension\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 24-216951\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 Performance Monotube Rear Shock Absorber is a direct-fit upgrade designed specifically for 2011 through 2023 Chrysler 300, Dodge Challenger, and Dodge Charger models equipped with rear-wheel drive. Engineered to replace your factory rear shocks, this high-performance damper enhances handling precision, stability, and overall driving confidence without compromising ride comfort. Whether your vehicle features a standard or self-leveling suspension system, the B6 delivers consistent, reliable damping performance tailored to your vehicle’s dynamics.\u003c\/p\u003e\n\u003cp\u003eIdeal for enthusiasts and daily drivers alike, these shocks improve cornering response and reduce unwanted body movement, making your vehicle feel more planted and controlled under a variety of driving conditions. The Bilstein B6 is a perfect balance of performance and comfort, providing a noticeable upgrade over OEM components while maintaining compatibility with factory springs.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eBilstein’s B6 Performance Rear Shock Absorbers incorporate advanced technology and design elements to deliver superior suspension performance:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonotube gas pressure technology for consistent damping and heat dissipation\u003c\/li\u003e\n  \u003cli\u003eApplication-specific valving tuned for optimal rear suspension dynamics\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement for easy installation with no modifications required\u003c\/li\u003e\n  \u003cli\u003eCompatible with both standard and self-leveling rear suspension systems\u003c\/li\u003e\n  \u003cli\u003eMaintains OEM spring compatibility for seamless integration\u003c\/li\u003e\n  \u003cli\u003eDurable construction designed for long-lasting performance and reliability\u003c\/li\u003e\n  \u003cli\u003eFinished in Bilstein’s signature yellow paint for corrosion resistance and style\u003c\/li\u003e\n  \u003cli\u003eReduces body roll and improves vehicle stability during cornering and braking\u003c\/li\u003e\n  \u003cli\u003eWeight: Approximately 7.3 lbs per shock for balanced performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 rear shock absorbers feature a robust monotube design that separates the gas and hydraulic fluid chambers with a floating piston. This design ensures consistent damping force and prevents cavitation under demanding driving conditions. The monotube construction also allows for better heat dissipation, reducing fade and maintaining performance over extended use.\u003c\/p\u003e\n\u003cp\u003eManufactured with high-quality materials and precision engineering, these shocks are built to withstand the rigors of daily driving and spirited performance. The yellow powder-coated finish not only provides a distinctive look but also protects against corrosion and environmental wear, ensuring longevity and durability.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eBilstein B6 rear shocks are engineered as direct replacements for the factory rear shocks on 2011–2023 Chrysler 300, Dodge Challenger, and Dodge Charger RWD models. Installation is straightforward and requires no special tools or modifications, preserving the original suspension geometry and ride height. These shocks are compatible with vehicles equipped with either standard or self-leveling rear suspension systems, making them a versatile upgrade option.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Bilstein B6 Performance Monotube Rear Shock Absorber (per unit)\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware is not included and may be reused from the original equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis Bilstein B6 rear shock absorber is ideal for drivers seeking a significant improvement in rear suspension performance without sacrificing ride comfort. It suits enthusiasts who demand sharper handling and enhanced vehicle control, as well as daily drivers who want a more confident and stable ride. Perfect for those upgrading worn factory shocks or enhancing their vehicle’s suspension for spirited driving, road trips, or occasional track use.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":44001686782164,"sku":"24-216951","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0000257_5393_24-216951_2a1fc85e-f7fd-4916-b979-8a62c868607b.webp?v=1771902790"},{"product_id":"eibach-pro-damper-shocks-300c-challenger-charger-magnum-2005-2010-except-awd","title":"Eibach Pro Damper Kit (F\u0026R): 05-10 Challenger \/ Charger \/ Magnum \/ 300","description":"\u003ch1\u003eEibach Pro Damper Kit (Front \u0026amp; Rear)\u003c\/h1\u003e\n\u003ch2\u003e2005–2010 Dodge Challenger \/ Charger \/ Magnum \/ Chrysler 300 (Except AWD)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 2895.840\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Damper Kit is a precision-engineered suspension upgrade designed for serious performance enthusiasts driving 2005 to 2010 Dodge Challenger, Charger, Magnum, and Chrysler 300 models, excluding all-wheel-drive variants. This kit features four gas-charged twin-tube shock absorbers that are specifically tuned to complement Eibach’s Pro-Kit and Sportline lowering springs. By delivering superior control over rebound and compression compared to factory shocks, the Pro-Dampers significantly improve vehicle stability, reduce body roll, and enhance cornering precision while maintaining a comfortable ride quality suitable for daily driving.\u003c\/p\u003e\n\u003cp\u003eWhether you’re looking to sharpen your car’s handling for spirited street driving or weekend performance runs, the Eibach Pro-Damper Kit offers a balanced suspension solution that elevates your driving experience without sacrificing comfort.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eEngineered to optimize handling and ride quality, the Eibach Pro-Damper Kit includes:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour precision-tuned gas-charged twin-tube shock absorbers (2 front, 2 rear)\u003c\/li\u003e\n  \u003cli\u003eEnhanced rebound and compression control for improved road feel\u003c\/li\u003e\n  \u003cli\u003eSignificant reduction in body roll during cornering, acceleration, and braking\u003c\/li\u003e\n  \u003cli\u003eOptimized compatibility with Eibach Pro-Kit and Sportline lowering springs\u003c\/li\u003e\n  \u003cli\u003eDurable construction with corrosion-resistant coating for long-lasting performance\u003c\/li\u003e\n  \u003cli\u003eImproved vehicle stability and responsiveness over OEM shocks\u003c\/li\u003e\n  \u003cli\u003eMaintains a compliant ride suitable for daily driving conditions\u003c\/li\u003e\n  \u003cli\u003eIncludes all necessary mounting hardware for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Damper shocks utilize a gas-charged twin-tube design that provides consistent damping performance under a variety of driving conditions. This design helps to minimize shock fade and maintain precise control over suspension movement. Each damper is built with high-quality materials and finished with a corrosion-resistant coating to ensure durability and longevity, even in harsh environments. The engineering behind these dampers focuses on delivering a perfect balance between performance and comfort, making them ideal for lowered vehicles equipped with Eibach springs.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Damper Kit is designed as a direct replacement for the factory shocks on 2005–2010 Dodge Challenger, Charger, Magnum, and Chrysler 300 models, excluding AWD versions. Installation requires no modifications and includes all necessary mounting hardware, allowing for a straightforward bolt-on upgrade. This kit is optimized to work seamlessly with Eibach Pro-Kit and Sportline lowering springs, ensuring a balanced suspension setup with consistent ride characteristics.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 Front Pro-Damper shock absorbers\u003c\/li\u003e\n  \u003cli\u003e2 Rear Pro-Damper shock absorbers\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis Pro-Damper Kit is ideal for performance enthusiasts who want to enhance their vehicle’s handling and stability without compromising daily drivability. It is perfectly suited for drivers who have installed or plan to install Eibach lowering springs and desire a suspension upgrade that complements the springs’ performance characteristics. Whether for aggressive street driving or spirited weekend runs, this kit delivers improved control, reduced body motion, and a more connected driving experience.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":43762698813652,"sku":"2895.840","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/5872_2895.840_1_d1495440-d2b8-4dad-a4f3-5d81ed9b8cb6.webp?v=1766378319"},{"product_id":"eibach-pro-damper-shocks-300-challenger-charger-2011-2023-except-awd","title":"Eibach Pro Damper Kit (F\u0026R): 11-23 Challenger \/ Charger \/ 300","description":"\u003ch1\u003eEibach Pro Damper Kit (Front \u0026amp; Rear)\u003c\/h1\u003e\n\u003ch2\u003e2011–2023 Dodge Challenger \/ Charger \/ Chrysler 300 (Except AWD)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 28110.840\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro Damper Kit is a complete suspension upgrade designed specifically for 2011 to 2023 Dodge Challenger, Charger, and Chrysler 300 models, excluding all-wheel-drive variants. This kit is engineered for drivers who demand precise handling, improved control, and enhanced ride comfort in one integrated solution. Whether you are lowering your vehicle for a more aggressive stance or seeking sharper performance on the street, the Pro-Damper Kit delivers superior damping control to reduce body roll, minimize bouncing, and maintain stability during spirited driving.\u003c\/p\u003e\n\u003cp\u003eBuilt to complement Eibach’s Pro-Kit and Sportline lowering springs, these performance shock absorbers ensure your suspension system works in harmony to provide balanced dynamics and consistent ride height. The Pro-Dampers are ideal for enthusiasts who want to elevate their driving experience without sacrificing comfort.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro Damper Kit offers a range of advanced features that enhance your vehicle’s suspension performance:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-performance damping for improved handling and responsiveness\u003c\/li\u003e\n  \u003cli\u003eReduces excessive body movement during cornering, acceleration, and braking\u003c\/li\u003e\n  \u003cli\u003eMaintains ride comfort even when paired with lowered springs\u003c\/li\u003e\n  \u003cli\u003ePrecision-engineered for daily driving and performance use\u003c\/li\u003e\n  \u003cli\u003eOptimized to work seamlessly with Eibach Pro-Kit and Sportline lowering springs\u003c\/li\u003e\n  \u003cli\u003eEnsures balanced suspension dynamics and proper ride height control\u003c\/li\u003e\n  \u003cli\u003eDurable, corrosion-resistant finish for long-lasting performance\u003c\/li\u003e\n  \u003cli\u003eHigh-pressure gas-charged twin-tube shock absorber design\u003c\/li\u003e\n  \u003cli\u003eComplete kit includes front and rear dampers with mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro Damper Kit features a robust high-pressure gas-charged twin-tube design that delivers consistent damping performance under aggressive driving conditions. Eibach uses premium materials and a corrosion-resistant finish to ensure durability and longevity, even in harsh street environments. Each shock absorber is precision-engineered to provide the ideal balance of stiffness and compliance, allowing for confident handling without compromising ride quality.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the suspension geometry of the Dodge Challenger, Charger, and Chrysler 300, these dampers integrate perfectly with Eibach’s lowering springs to maintain optimal ride height and suspension travel. This tailored approach guarantees that your vehicle’s suspension components work in unison for maximum performance and comfort.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro Damper Kit is a direct replacement for the factory shock absorbers on 2011–2023 Dodge Challenger, Charger, and Chrysler 300 models, excluding AWD versions. Installation requires no special modifications and uses the included mounting hardware for a straightforward upgrade. Professional installation is recommended to ensure proper fitment and optimal suspension performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 Front Pro-Damper Shock Absorbers\u003c\/li\u003e\n  \u003cli\u003e2 Rear Pro-Damper Shock Absorbers\u003c\/li\u003e\n  \u003cli\u003eComplete mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis kit is ideal for enthusiasts and drivers who want to improve their vehicle’s handling precision and ride quality, especially when paired with Eibach lowering springs. It suits those seeking a balanced suspension upgrade for daily driving, spirited street performance, and enhanced cornering stability without sacrificing comfort.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":43762699141332,"sku":"28110.840","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/5890_F143845753_00de0f4c-a2c3-4a4b-8aa5-f5fc943b6dad.webp?v=1766378322"},{"product_id":"bilstein-b6-monotube-rear-shocks-300-challenger-charger-magnum-2005-2010-including-self-leveling","title":"Bilstein B6 Perf Shock Absorber Monotube (REAR): 05-10 Challenger \/ Charger \/ Magnum \/ 300 RWD","description":"\u003ch1\u003eBilstein B6 Performance Shock Absorber\u003c\/h1\u003e\n\u003ch2\u003e2005–2010 Chrysler 300, Dodge Challenger, Dodge Charger, Dodge Magnum RWD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 24-144780\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 Performance Monotube Rear Shock Absorber is a direct replacement designed specifically for the rear suspension of 2005 to 2010 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum models with rear-wheel drive. Engineered to enhance ride quality and vehicle handling, this shock absorber is compatible with both standard and self-leveling suspension systems. It offers a significant upgrade over factory shocks by delivering improved stability, control, and responsiveness without compromising ride comfort.\u003c\/p\u003e\n\u003cp\u003eIdeal for drivers seeking to maintain factory ride height while benefiting from superior damping performance, the B6 shock absorber ensures a safer and more confident driving experience, especially during cornering, braking, and on uneven road surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eBilstein’s B6 Performance Rear Shock Absorber incorporates advanced technology and design elements to optimize suspension performance. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonotube gas pressure technology for consistent and fade-free damping\u003c\/li\u003e\n  \u003cli\u003eApplication-specific valving tailored to the rear suspension dynamics of the specified vehicles\u003c\/li\u003e\n  \u003cli\u003eCompatibility with both standard and self-leveling rear suspension systems\u003c\/li\u003e\n  \u003cli\u003ePrecision-tuned to work seamlessly with original equipment factory springs\u003c\/li\u003e\n  \u003cli\u003eImproved vehicle stability and control during aggressive driving maneuvers\u003c\/li\u003e\n  \u003cli\u003eEnhanced ride comfort without sacrificing performance\u003c\/li\u003e\n  \u003cli\u003eDurable construction tested to meet or exceed OEM standards\u003c\/li\u003e\n  \u003cli\u003eDistinctive yellow finish for easy identification and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on fitment for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 rear shock absorber features a robust monotube design that utilizes high-pressure nitrogen gas to eliminate cavitation and maintain consistent damping performance under all driving conditions. This design allows for faster response times and improved heat dissipation compared to traditional twin-tube shocks. The shock body is constructed from high-quality materials and finished with Bilstein’s signature yellow paint, providing excellent corrosion resistance and long-lasting durability.\u003c\/p\u003e\n\u003cp\u003eEach unit is engineered with application-specific valving to precisely control the compression and rebound characteristics, ensuring optimal balance between comfort and handling tailored to the rear suspension setup of the 2005–2010 Chrysler and Dodge RWD models.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 rear shock absorber is designed for direct replacement of the factory rear shocks on 2005–2010 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum rear-wheel-drive vehicles. It fits models equipped with either standard or self-leveling rear suspension systems without requiring any modifications. Installation is straightforward and can typically be completed with basic hand tools by a professional or experienced enthusiast.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Bilstein B6 Monotube Rear Shock Absorber (driver or passenger side)\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions (where applicable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis Bilstein B6 rear shock absorber is perfect for drivers who want to restore or improve the handling and ride quality of their 2005–2010 Chrysler 300, Dodge Challenger, Dodge Charger, or Dodge Magnum without altering the vehicle’s factory ride height. It is especially suited for enthusiasts who demand enhanced stability and control during spirited driving, as well as those seeking a durable, long-lasting suspension upgrade that maintains OEM reliability and comfort.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":44004866785492,"sku":"24-144780","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0000232_6693_24-144780_53e8c8d9-23df-4fd3-9871-b361b81b4c82.webp?v=1771902787"},{"product_id":"kyb-excel-g-front-struts-chrysler-300-dodge-charger-magnum-awd-2005-2024","title":"KYB Excel-G Front Strut: Dodge Challenger \/ Charger \/ Magnum \/ 300 AWD 2005-2019","description":"\u003ch1\u003eKYB Excel-G Front Strut\u003c\/h1\u003e\n\u003ch2\u003e2005–2019 Dodge Challenger, Dodge Charger, Dodge Magnum, 2005–2024 Chrysler 300 AWD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 341673\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe KYB Excel-G Front Strut is a premium replacement suspension component designed specifically for all-wheel-drive (AWD) models of the Dodge Challenger, Charger, Magnum, and Chrysler 300 from 2005 through 2019 (and up to 2024 for the Chrysler 300). Engineered to restore the original ride quality and handling characteristics, these struts provide a smooth, controlled driving experience by effectively compensating for worn or fatigued suspension parts.\u003c\/p\u003e\n\u003cp\u003eIdeal for drivers who demand reliable performance and enhanced vehicle stability, the Excel-G struts deliver improved steering precision and responsiveness. Whether you are replacing aging factory struts or upgrading to regain lost suspension performance, KYB’s Excel-G line offers a direct-fit solution that meets or often exceeds original equipment standards.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eKYB Excel-G Front Struts incorporate advanced technology and design elements to ensure consistent, dependable performance under a variety of driving conditions. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwin-tube design for balanced damping and ride comfort\u003c\/li\u003e\n  \u003cli\u003ePatented check-valve technology that maintains consistent damping performance, even during aggressive driving or rough terrain\u003c\/li\u003e\n  \u003cli\u003eCalibrated specifically for each vehicle application to restore factory handling characteristics\u003c\/li\u003e\n  \u003cli\u003eDurable construction using high-quality materials for long-lasting reliability\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement for easy installation without modifications\u003c\/li\u003e\n  \u003cli\u003eImproves vehicle stability, steering response, and overall ride quality\u003c\/li\u003e\n  \u003cli\u003eEngineered to compensate for worn suspension components, restoring original control\u003c\/li\u003e\n  \u003cli\u003eSold individually; recommended to purchase two units for complete front suspension replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe KYB Excel-G struts are built with robust materials and precision engineering to withstand the rigors of daily driving and demanding road conditions. The twin-tube design enhances shock absorption and damping consistency, while the patented check-valve technology ensures smooth operation by controlling fluid flow within the strut. Each unit is carefully calibrated to match the specific suspension geometry and weight distribution of the AWD Dodge and Chrysler models it fits, ensuring optimal performance and longevity.\u003c\/p\u003e\n\u003cp\u003eThese struts are manufactured to meet or exceed OEM specifications, providing a reliable and durable solution that maintains the integrity of your vehicle’s suspension system over time.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThe KYB Excel-G Front Struts are designed as direct-fit replacements for the front suspension of AWD Dodge Challenger, Charger, Magnum (2005–2019), and Chrysler 300 (2005–2024) models. Installation is straightforward and requires no special modifications, making it suitable for professional mechanics and experienced DIY enthusiasts alike. For a balanced and effective suspension upgrade, it is recommended to replace both left and right front struts simultaneously.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne KYB Excel-G Front Strut (sold individually)\u003c\/li\u003e\n  \u003cli\u003ePre-assembled mounting hardware (varies by application)\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions (where applicable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis product is perfect for owners of AWD Dodge Challenger, Charger, Magnum, and Chrysler 300 vehicles who are experiencing diminished ride quality, reduced handling precision, or worn suspension components. It is also an excellent choice for enthusiasts seeking to maintain or restore factory-level suspension performance without compromising comfort or control.\u003c\/p\u003e","brand":"KYB","offers":[{"title":"Default Title","offer_id":44002765209812,"sku":"341673","price":165.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/9034_341673_91b67a8b-c317-43df-9f02-8ab84652e851.webp?v=1766378299"},{"product_id":"kyb-excel-g-rear-shocks-chrysler-300-dodge-charger-magnum-awd-2005-2010","title":"KYB Excel-G Rear Strut: Dodge Challenger \/ Charger \/ Magnum \/ 300 AWD 2005-2019","description":"\u003ch1\u003eKYB Excel-G Rear Strut\u003c\/h1\u003e\n\u003ch2\u003e2005–2010 Chrysler 300, 2005–2019 Dodge Challenger, Charger, Magnum AWD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 349086\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe KYB Excel-G Rear Strut is a premium replacement shock absorber designed specifically for all-wheel-drive (AWD) models of the Chrysler 300, Dodge Challenger, Charger, and Magnum from 2005 through 2019. Engineered to restore your vehicle’s original ride quality and handling precision, this rear strut addresses the common issues caused by worn suspension components such as reduced stability and diminished comfort. Whether you’re looking to maintain daily driving comfort or improve your vehicle’s responsiveness, the Excel-G rear strut offers a reliable, direct-fit solution that often surpasses original equipment performance.\u003c\/p\u003e\n\u003cp\u003eIdeal for drivers who demand a smooth, controlled ride without sacrificing handling, the KYB Excel-G rear strut is calibrated to each vehicle application to ensure optimal damping and suspension response. This makes it an excellent choice for restoring confidence behind the wheel and extending the life of your AWD rear suspension system.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eDesigned with advanced technology and precision engineering, the KYB Excel-G rear strut delivers consistent performance and durability. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwin-tube design with patented check-valve technology for consistent damping under all driving conditions\u003c\/li\u003e\n  \u003cli\u003eCalibrated specifically for each vehicle application to restore original handling characteristics\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement for easy installation without modifications\u003c\/li\u003e\n  \u003cli\u003eRestores responsiveness and control to worn rear suspensions\u003c\/li\u003e\n  \u003cli\u003eDurable construction using high-quality materials for long-lasting performance\u003c\/li\u003e\n  \u003cli\u003eImproves ride comfort by smoothing out road imperfections\u003c\/li\u003e\n  \u003cli\u003eOften outperforms original equipment shocks in both comfort and handling\u003c\/li\u003e\n  \u003cli\u003eIdeal for AWD rear suspension systems on Chrysler 300, Dodge Challenger, Charger, and Magnum models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe KYB Excel-G rear strut features a robust twin-tube design that incorporates patented check-valve technology to maintain consistent damping force regardless of road conditions or driving style. This technology allows the shock to respond quickly to suspension movements, providing a smooth yet controlled ride. Precision engineering ensures that each strut is calibrated to the specific weight and suspension geometry of the vehicle, resulting in improved handling and stability.\u003c\/p\u003e\n\u003cp\u003eBuilt with high-grade materials, the Excel-G strut resists corrosion and wear, ensuring long service life even under demanding conditions. The durable construction also helps maintain suspension alignment and vehicle control over time, reducing the need for frequent replacements.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThe KYB Excel-G rear strut is designed as a direct-fit replacement for the rear suspension of AWD Chrysler 300 (2005–2010), Dodge Challenger, Charger, and Magnum models (2005–2019). Installation is straightforward and requires no special modifications, making it suitable for professional mechanics and experienced DIY enthusiasts alike. For optimal suspension balance and performance, it is recommended to replace both left and right rear struts simultaneously.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne KYB Excel-G rear strut (sold individually)\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions (where applicable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis rear strut is perfect for drivers who want to restore or enhance the rear suspension performance of their AWD Chrysler 300, Dodge Challenger, Charger, or Magnum. Whether your vehicle exhibits signs of worn shocks such as excessive bounce, poor handling, or diminished ride comfort, the KYB Excel-G offers a reliable upgrade that balances comfort with precise control. It is also well suited for enthusiasts seeking a suspension component that performs better than original equipment without sacrificing daily drivability.\u003c\/p\u003e","brand":"KYB","offers":[{"title":"Default Title","offer_id":44002765406420,"sku":"349086","price":89.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0016380_9036_349086_6d7343ae-1c40-4fd3-abc3-b0f1eb0481b0.webp?v=1771902945"},{"product_id":"koni-str-t-front-shocks-300-challenger-charger-2011-2024-exc-awd-srt8","title":"Koni STR.T Front Shocks: 300 \/ Challenger \/ Charger 2011 - 2023 (Exc. AWD \u0026 SRT8)","description":"\u003ch3\u003eKoni STR.T Front Shocks\u003c\/h3\u003e\u003cp\u003e11-24 300 \/ Challenger \/ Charger (Exc. AWD \u0026amp; SRT8)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e8250 1032\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKoni STR.T Front Shocks deliver reliable performance and a sporty driving experience. Designed for full-size sedans, SUVs, and trucks, these monotube gas-pressure shocks feature fixed-rate damping engineered to reduce body roll and improve handling. The bright orange finish not only looks aggressive but also highlights the front suspension’s performance upgrade.\n\nIdeal for OE replacement or vehicle enhancement, STR.T shocks are compatible with lowered springs and other suspension upgrades. Non-adjustable yet engineered with Koni’s decades of experience in sports damping, they provide consistent and precise handling for everyday driving or spirited performance. Sold individually, two shocks are required for a complete front setup. Koni North America backs these shocks with a limited lifetime warranty for long-lasting quality and reliability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty monotube gas-pressure front shock\u003c\/li\u003e\n\u003cli\u003eFixed-rate damping for improved handling and reduced body roll\u003c\/li\u003e\n\u003cli\u003eIdeal for OE replacement or performance upgrades\u003c\/li\u003e\n\u003cli\u003eComplements lowered springs\u003c\/li\u003e\n\u003cli\u003eNon-adjustable design for consistent, reliable performance\u003c\/li\u003e\n\u003cli\u003eBright orange finish for sporty visual appeal\u003c\/li\u003e\n\u003cli\u003eSold per shock; select two for both front sides\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Koni North America\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KONI","offers":[{"title":"Default Title","offer_id":44002767339732,"sku":"8250 1032","price":114.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0000197_9112_82501032_44678321-8bc3-4484-a4fb-3e665180276a.webp?v=1771902786"},{"product_id":"koni-str-t-rear-shocks-300-challenger-charger-2011-2024-exc-awd-srt","title":"Koni STR.T Rear Shocks: 300 \/ Challenger \/ Charger 2011 - 2023 (Exc. AWD \u0026 SRT)","description":"\u003ch3\u003eKoni STR.T Rear Shocks\u003c\/h3\u003e\u003cp\u003e11-24 300 \/ Challenger \/ Charger (Exc. AWD \u0026amp; SRT)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e8250 1033\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKoni STR.T Rear Shocks provide a balance of comfort, control, and sporty performance. Designed for full-size sedans, SUVs, and trucks, these monotube gas-pressure shocks feature fixed-rate damping to reduce body roll and improve handling. The bright orange finish adds a performance-inspired visual accent to the rear suspension, giving the vehicle a dynamic look.\n\nIdeal for OE replacement or suspension upgrades, STR.T shocks complement lowered springs and other modifications. Non-adjustable yet engineered with Koni’s expertise in sport damping, they deliver consistent, reliable performance under daily driving or spirited use. Sold individually, two shocks are required for a complete rear setup. Koni North America backs these shocks with a limited lifetime warranty, ensuring long-lasting quality and performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty monotube gas-pressure rear shock\u003c\/li\u003e\n\u003cli\u003eFixed-rate damping for improved handling and reduced body roll\u003c\/li\u003e\n\u003cli\u003eIdeal for OE replacement or performance upgrades\u003c\/li\u003e\n\u003cli\u003eComplements lowered springs\u003c\/li\u003e\n\u003cli\u003eNon-adjustable design for consistent, reliable performance\u003c\/li\u003e\n\u003cli\u003eBright orange finish for sporty visual appeal\u003c\/li\u003e\n\u003cli\u003eSold per shock; select two for both rear sides\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Koni North America\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KONI","offers":[{"title":"Default Title","offer_id":44002767372500,"sku":"8250 1033","price":90.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0000167_9121_82501033_d227beb1-b1bb-4998-a5be-50090b6eba9d.webp?v=1771902784"},{"product_id":"afe-racerunner-2-0in-rear-shock-kit-for-0-2in-lifts-2018-jeep-wrangler-jl-v6-3-6l","title":"AFE RaceRunner 2.0 IN Rear Shock Kit: Jeep Wrangler JL 2018 - 2025 (All Models)","description":"\u003ch1\u003eaFe RaceRunner Rear Shock Kit\u003c\/h1\u003e\n\u003ch2\u003e2018–2026 Jeep Wrangler JL 3.6L V6\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 37-D7001R\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe aFe RaceRunner 2.0 IN Rear Shock Kit is a premium suspension upgrade designed specifically for Jeep Wrangler JL Sport models from 2018 through 2026, including both 2-door and 4-door variants equipped with the 3.6L V6 engine. Engineered to enhance rear suspension performance, these monotube shocks deliver improved handling, ride comfort, and durability for off-road enthusiasts and daily drivers alike.\u003c\/p\u003e\n\u003cp\u003eBuilt to withstand the demands of rugged terrain, the RaceRunner shocks provide consistent damping and superior control, making them an ideal choice for Jeep owners seeking to elevate their vehicle’s rear suspension dynamics without sacrificing ride quality. Whether navigating challenging trails or cruising on pavement, this shock kit offers a reliable and robust solution to optimize your Wrangler’s rear suspension performance.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eDesigned with precision engineering and high-quality materials, the aFe RaceRunner Rear Shock Kit incorporates advanced technology to ensure outstanding performance and longevity:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.0-inch black zinc-plated monotube cylinder for enhanced corrosion resistance and superior heat dissipation\u003c\/li\u003e\n  \u003cli\u003eCNC-machined components manufactured to exacting tolerances for consistent quality and precise fitment\u003c\/li\u003e\n  \u003cli\u003eInternal Floating Piston (IFP) design for simplified installation and improved shock performance\u003c\/li\u003e\n  \u003cli\u003eMulti-seal carrier system engineered to prevent fluid leakage and ensure long-lasting reliability\u003c\/li\u003e\n  \u003cli\u003eFully synthetic shock fluid formulated for optimal damping and temperature stability under demanding conditions\u003c\/li\u003e\n  \u003cli\u003e5\/8-inch polished nitro steel shafts providing exceptional strength and resistance to bending and wear\u003c\/li\u003e\n  \u003cli\u003ePrecision valving tuned specifically for Jeep Wrangler JL Sport models to balance ride comfort with control\u003c\/li\u003e\n  \u003cli\u003eCompatible with both 2-door and 4-door Sport models for broad application within the JL lineup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe RaceRunner Rear Shock Kit is crafted from premium materials engineered to endure the rigors of off-road driving and everyday use. Its monotube design offers superior heat dissipation compared to traditional twin-tube shocks, reducing fade during extended operation. The black zinc plating protects the shock cylinder from corrosion, extending service life even in harsh environments.\u003c\/p\u003e\n\u003cp\u003eEach shock features CNC-machined parts that meet strict quality standards, ensuring a precise fit and smooth operation. The internal floating piston separates the shock fluid from nitrogen gas, preventing aeration and maintaining consistent damping performance. Additionally, the multi-seal carrier system enhances durability by eliminating fluid leaks, while the polished nitro steel shafts resist bending and wear under heavy loads.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the aFe RaceRunner Rear Shock Kit is straightforward and designed for direct bolt-on fitment to 2018–2026 Jeep Wrangler JL 2-door and 4-door Sport models with the 3.6L V6 engine. No modifications are required, allowing for a seamless upgrade from factory rear shocks. Professional installation is recommended to ensure proper torque specifications and alignment for optimal performance and safety.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo (2) aFe RaceRunner 2.0 IN Rear Shock absorbers\u003c\/li\u003e\n  \u003cli\u003eMounting hardware required for direct fitment\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock kit is ideal for Jeep Wrangler JL Sport owners who want to improve rear suspension performance for off-road adventures, trail riding, or enhanced daily driving comfort. It suits enthusiasts seeking a durable, high-quality shock absorber that balances ride quality with rugged capability, delivering reliable performance in a variety of driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eEmissions Note\u003c\/h3\u003e\n\u003cp\u003eThis product does not require a CARB Executive Order (EO#) and is fully compliant with emissions regulations.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":45639934705876,"sku":"37-D7001R","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066401_0005_9319b14e4e10115766d87a28ed90ddd8_f2f35533-d63d-47b1-aa88-f0060875f782.webp?v=1771724678"},{"product_id":"afe-racerunner-2-0in-front-shock-kit-for-0-2in-lifts-2018-jeep-wrangler-jl-v6-3-6l","title":"AFE RaceRunner 2.0 IN Front Shock Kit: Jeep Wrangler JL 2018 - 2025 (All Models)","description":"\u003ch1\u003eaFe RaceRunner 2.0 IN Front Shock Kit\u003c\/h1\u003e\n\u003ch2\u003e2018–2026 Jeep Wrangler 3.6L V6\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 37-D7001F\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe aFe RaceRunner 2.0 IN Front Shock Kit is a precision-engineered suspension upgrade designed exclusively for Jeep Wrangler JL Sport models from 2018 through 2026, including both 2-door and 4-door variants. This front shock kit enhances your Wrangler’s suspension performance by delivering improved handling, ride comfort, and durability across a variety of driving conditions. Whether navigating challenging off-road trails or cruising urban streets, these shocks provide consistent damping control and superior vehicle stability.\u003c\/p\u003e\n\u003cp\u003eBuilt for Jeep enthusiasts who demand a reliable and high-performance suspension solution, the RaceRunner 2.0 IN shocks strike an ideal balance between comfort and rugged capability. This kit is perfect for daily drivers and weekend adventurers alike who want to elevate their Wrangler’s front suspension without compromising reliability or ease of installation.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eEngineered with advanced technology and high-quality materials, the aFe RaceRunner 2.0 IN Front Shock Kit offers the following standout features:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.0-inch monotube cylinder with black zinc plating for superior heat dissipation and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eCNC machined components manufactured to exacting tolerances for consistent and reliable performance\u003c\/li\u003e\n  \u003cli\u003eInternal Floating Piston (IFP) design that simplifies installation and enhances shock response\u003c\/li\u003e\n  \u003cli\u003eMulti-seal carrier system engineered to prevent leakage and ensure long-lasting durability\u003c\/li\u003e\n  \u003cli\u003eFully synthetic shock fluid formulated for optimal damping and temperature stability under all conditions\u003c\/li\u003e\n  \u003cli\u003e5\/8-inch polished nitro steel shafts providing exceptional strength and resistance to wear and impact\u003c\/li\u003e\n  \u003cli\u003eFitment tailored specifically for 2018–2026 Jeep Wrangler JL Sport 2-door and 4-door models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe RaceRunner 2.0 IN shocks are built to withstand the demanding conditions of both off-road excursions and everyday driving. The monotube design improves heat management, reducing shock fade during extended use and maintaining consistent damping performance. Precision CNC machining ensures each component meets strict specifications, resulting in smooth and reliable shock action.\u003c\/p\u003e\n\u003cp\u003eDurability is enhanced by black zinc plating, which protects against corrosion, while the polished nitro steel shafts resist wear from debris and impacts. The internal floating piston separates gas and oil chambers, preventing aeration and maintaining consistent damping response for a smoother, more controlled ride regardless of terrain.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the aFe RaceRunner 2.0 IN Front Shock Kit is straightforward and designed to be a direct replacement for factory shocks on 2018–2026 Jeep Wrangler JL Sport 2-door and 4-door models. The kit utilizes existing mounting points, requiring no modifications or special tools, making it an accessible upgrade for enthusiasts seeking enhanced suspension performance quickly and reliably.\u003c\/p\u003e\n\u003cp\u003ePlease note this kit is specifically compatible with Sport trim models only and will not fit other Jeep Wrangler trims or configurations.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo (2) aFe RaceRunner 2.0 IN front monotube shocks\u003c\/li\u003e\n  \u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis front shock kit is ideal for Jeep Wrangler JL owners who want to improve their vehicle’s front suspension with durable, high-performance components. It is well-suited for off-road enthusiasts, daily drivers, and anyone seeking enhanced ride quality, handling, and stability without sacrificing reliability. Perfect for those driving 2-door or 4-door Sport models who demand a shock capable of handling both rugged terrain and everyday street use.\u003c\/p\u003e\n\n\u003ch3\u003eEmissions Note\u003c\/h3\u003e\n\u003cp\u003eThis product does not require a CARB Executive Order (EO#) and is fully compliant with emissions regulations.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":45639937032404,"sku":"37-D7001F","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066395_0006_9319b14e4e10115766d87a28ed90ddd8_1e5c5f45-a5a7-4314-a2d9-bcc3168b2f47.webp?v=1771724677"},{"product_id":"eibach-11-16-ram-1500-rear-pro-truck-shock","title":"Eibach Pro-Truck Rear Shock (Sold Individually): Dodge Ram 1500 4WD 2009 - 2018","description":"\u003ch1\u003eEibach Pro-Truck Rear Shock\u003c\/h1\u003e\n\u003ch2\u003e2009–2018 Dodge Ram 1500 4WD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-27-001-04-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is a high-performance replacement shock absorber designed specifically for Dodge Ram 1500 4WD models from 2009 through 2018. Sold individually, this shock is engineered to enhance your truck’s handling and ride quality both on and off the road. Whether you’re tackling rugged terrain or cruising city streets, the Pro-Truck shock delivers improved control, stability, and damping performance for a smoother, more confident driving experience.\u003c\/p\u003e\n\u003cp\u003eIdeal for truck owners seeking a durable, reliable upgrade to their suspension, this shock absorber supports lifted suspensions up to 1.5 inches, making it a versatile choice for mild off-road modifications without sacrificing factory ride comfort.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock combines advanced engineering and rugged construction to meet the demands of truck enthusiasts and off-road adventurers alike. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube, high-pressure design for superior damping and heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston for consistent performance under load\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock body offering excellent weather resistance\u003c\/li\u003e\n  \u003cli\u003ePrecision engineered for both street and off-road driving conditions\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on replacement for easy installation without modifications\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions from 0 to 1.5 inches\u003c\/li\u003e\n  \u003cli\u003eManufactured in the USA with a limited lifetime warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Truck Rear Shock features a robust monotube design that improves damping efficiency by maintaining consistent hydraulic pressure. This design also enhances heat dissipation, preventing fade during extended use. The 46mm piston is engineered to handle the increased stresses of truck applications, providing stable and responsive shock absorption.\u003c\/p\u003e\n\u003cp\u003eThe shock shaft is treated with a nitro coating, which minimizes wear and corrosion, extending the service life of the component. The zinc-coated shock body protects against rust and environmental damage, ensuring durability in harsh weather and off-road conditions. Every unit is precision manufactured in the USA to meet stringent quality standards.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is designed as a direct replacement for the rear shocks on 2009–2018 Dodge Ram 1500 4WD models. Installation is straightforward and requires no special tools or modifications, making it accessible for both professional mechanics and experienced DIY enthusiasts. For a complete rear shock setup, it is recommended to purchase two shocks—one for the left side and one for the right side.\u003c\/p\u003e\n\u003cp\u003eThis shock can accommodate lifted suspensions up to 1.5 inches, providing flexibility for mild lift kits without compromising fitment or performance. However, fitment and warranty are not guaranteed for applications outside the specified vehicle range or for lifts exceeding 1.5 inches.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Rear Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eManufacturer’s limited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is perfect for Dodge Ram 1500 4WD owners who want to upgrade their rear suspension for improved handling, ride comfort, and durability. It suits daily drivers, weekend off-roaders, and light-duty lifted trucks seeking enhanced shock performance without the need for extensive suspension modifications.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848367595732,"sku":"E60-27-001-04-01","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066048_0101_c19a052e95e0dc63f2b314d882acf471_c26c9185-52ee-458f-91cf-0a0b588c80ad.webp?v=1771724631"},{"product_id":"eibach-11-16-ram-1500-front-pro-truck-shock","title":"Eibach Pro-Truck Front Shock (Sold Individually): Dodge Ram 1500 4WD 2009 - 2018","description":"\u003ch1\u003eEibach Pro-Truck Front Shock\u003c\/h1\u003e\n\u003ch2\u003e2002–2010 Dodge Ram 1500 4WD, 2011–2018 Ram 1500 4WD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-27-001-04-10\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Shock is a high-performance replacement shock absorber designed specifically for Dodge Ram 1500 4WD models from 2002 to 2010 and Ram 1500 4WD models from 2011 to 2018. Sold individually, this shock is engineered to enhance both on-road handling and off-road capability, providing superior control and damping performance. Ideal for truck owners seeking improved ride quality, stability, and durability, the Pro-Truck Front Shock supports lifting and leveling modifications with adjustable ride height options.\u003c\/p\u003e\n\u003cp\u003eBuilt to meet the demands of daily driving and rugged terrain, this shock absorber offers a balance of comfort and performance, making it a reliable upgrade for enthusiasts and professionals alike.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eDesigned with precision engineering and advanced technology, the Eibach Pro-Truck Front Shock delivers a range of benefits that enhance your vehicle’s suspension system:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube high-pressure design for consistent damping and improved heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston for enhanced durability and performance under load\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eAdjustable front spring perch ring slots allowing 0 to 3 inches of lift or leveling\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock bodies for superior weather resistance\u003c\/li\u003e\n  \u003cli\u003ePrecision engineered for both street and off-road applications\u003c\/li\u003e\n  \u003cli\u003eMade in the USA with a limited lifetime warranty for long-term reliability\u003c\/li\u003e\n  \u003cli\u003eSold individually; purchase two for a complete front shock set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Shock features a robust mono-tube construction that enhances shock absorption and heat management during demanding driving conditions. The heavy-duty 46mm piston is engineered to provide smooth, consistent damping, while the nitro-coated shaft minimizes wear and extends service life. Zinc coating on the shock body protects against rust and corrosion, ensuring durability in harsh environments. The adjustable spring perch design allows for easy ride height customization, accommodating lifts or leveling modifications up to 3 inches without compromising performance.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Eibach Pro-Truck Front Shock is straightforward and designed to fit directly onto 2002–2010 Dodge Ram 1500 4WD and 2011–2018 Ram 1500 4WD models without the need for extensive modifications. The adjustable spring perch ring slots provide flexibility for lift or leveling kits, making it an excellent choice for trucks with aftermarket suspension setups. For optimal performance and safety, it is recommended to replace shocks in pairs. Professional installation is advised to ensure proper fitment and alignment.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Front Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eAdjustable spring perch ring for ride height customization\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is ideal for Dodge Ram 1500 owners who demand enhanced suspension performance for both daily driving and off-road adventures. It suits those looking to improve ride quality, vehicle control, and durability while accommodating suspension lifts or leveling kits. Whether you use your truck for work, recreation, or towing, the Eibach Pro-Truck Front Shock delivers reliable performance and long-lasting value.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848367628500,"sku":"E60-27-001-04-10","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066044_0102_14c7efc5f3752c67cbce4f872c954f77_e9cca24a-6848-4465-b810-50a78580b521.webp?v=1771724630"},{"product_id":"eibach-03-09-dodge-ram-2500-4wd-rear-pro-truck-shock-for-lifted-suspensions-0-1-5in","title":"Eibach Pro-Truck Rear Shock (REAR): Dodge Ram 2500 \/ 3500 (02-18) Excl Dually - Sold Individually","description":"\u003ch1\u003eEibach Pro-Truck Rear Shock\u003c\/h1\u003e\n\u003ch2\u003e2002–2010 Dodge Ram 2500 \/ 3500, 2011–2018 Ram 2500 \/ 3500\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-27-005-02-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is a high-performance replacement shock absorber designed specifically for Dodge Ram 2500 and 3500 models from 2002 through 2018 (excluding dually configurations). Engineered for both street and off-road use, this shock enhances vehicle control, ride quality, and damping performance. It is ideal for truck owners seeking improved handling and durability, especially those with lifted suspensions up to 1.5 inches.\u003c\/p\u003e\n\u003cp\u003eSold individually, these shocks allow you to replace one side at a time or purchase a pair for a complete rear shock upgrade. Eibach’s Pro-Truck series is known for precision engineering and robust construction, making it a trusted choice for serious truck enthusiasts and professionals alike.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock combines advanced technology and durable materials to deliver superior performance in demanding conditions. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube, high-pressure design for consistent damping and improved heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston for enhanced shock absorption and longevity\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock bodies offering excellent weather resistance\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions ranging from 0 to 1.5 inches\u003c\/li\u003e\n  \u003cli\u003ePrecision engineered for both on-road comfort and off-road control\u003c\/li\u003e\n  \u003cli\u003eManufactured in the USA with a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Truck Rear Shock features a mono-tube design that provides superior damping performance compared to traditional twin-tube shocks. This design allows for better heat dissipation, reducing fade during extended use. The heavy-duty 46mm piston ensures smooth and consistent operation, while the nitro-coated shaft minimizes wear and corrosion for extended service life.\u003c\/p\u003e\n\u003cp\u003eThe shock body is zinc-coated to withstand harsh weather and off-road conditions, ensuring durability and reliability. Every component is precision engineered and assembled in the USA to meet rigorous quality standards.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Eibach Pro-Truck Rear Shock is straightforward and designed to fit directly onto compatible Dodge Ram 2500 and 3500 models without the need for modifications. It accommodates lifted suspensions up to 1.5 inches, making it suitable for trucks with mild to moderate lift kits. For optimal performance, it is recommended to replace shocks in pairs.\u003c\/p\u003e\n\u003cp\u003ePlease note that fitment excludes dually models, and Eibach does not guarantee fitment or warranty coverage on unlisted applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Rear Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eManufacturer’s limited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock is perfect for Dodge Ram 2500 and 3500 owners who demand enhanced ride control and durability for both daily driving and off-road adventures. It suits trucks with factory or lifted suspensions up to 1.5 inches and is ideal for those looking to upgrade their rear suspension for improved handling, stability, and comfort under load or rough terrain conditions.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848367661268,"sku":"E60-27-005-02-01","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066042_0103_0f81ec06cb354bb8760c5dc5d0ce89c3_a4b7bcf5-4808-42ff-9f0d-eaa486bd2863.webp?v=1771724630"},{"product_id":"eibach-14-18-ram-2500-rear-pro-truck-sport-shock-for-0-1in-rear-lift","title":"Eibach Pro-Truck Rear Shock (Sold Individually, 0-1\" Lift): Ram 2500 \u0026 3500 2014 - 2018","description":"\u003ch1\u003eEibach Pro-Truck Rear Shock\u003c\/h1\u003e\n\u003ch2\u003e2011–2018 Ram 2500 \u0026amp; 3500\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-27-006-03-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is a high-performance replacement shock absorber designed specifically for Ram 2500 and 3500 trucks from 2011 through 2018. Engineered to enhance both on-road comfort and off-road control, this shock absorber is ideal for drivers who demand improved handling and ride quality without sacrificing durability. It is sold individually and is compatible with lifted suspensions ranging from 0 to 1 inch, making it a versatile upgrade for trucks with mild suspension modifications.\u003c\/p\u003e\n\u003cp\u003eWhether you’re navigating rugged terrain or cruising on the highway, the Pro-Truck Rear Shock delivers consistent damping performance to keep your truck stable and responsive. Its robust construction and advanced design ensure long-lasting reliability under demanding conditions.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eDesigned with precision engineering and advanced materials, the Eibach Pro-Truck Rear Shock offers a range of features that set it apart from standard shocks:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube, high-pressure shock design for superior heat dissipation and consistent damping\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston for enhanced control and durability\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock bodies that provide excellent weather resistance\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions from 0 to 1.5 inches for flexible fitment\u003c\/li\u003e\n  \u003cli\u003ePrecision engineered for both street and off-road performance\u003c\/li\u003e\n  \u003cli\u003eManufactured in the USA to meet strict quality standards\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty for added peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock features a mono-tube design that improves heat dissipation and shock response compared to traditional twin-tube shocks. This design allows for more consistent damping performance during extended use, especially in off-road conditions where shocks are subjected to intense stress. The heavy-duty 46mm piston ensures stable and precise control over suspension movement, enhancing vehicle stability and ride comfort.\u003c\/p\u003e\n\u003cp\u003eThe shock shaft is treated with a nitro coating, which minimizes wear and corrosion, extending the service life of the component. Additionally, the shock body is zinc-coated to provide superior resistance against rust and environmental damage, making it suitable for harsh weather and off-road environments.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is designed for direct bolt-on installation on 2011–2018 Ram 2500 and 3500 models. It fits trucks with stock suspensions as well as those lifted up to 1 inch, allowing for mild suspension modifications without compromising performance. Installation typically requires standard hand tools and basic mechanical knowledge. For optimal results, it is recommended to replace shocks in pairs to maintain balanced handling and ride quality.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Rear Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eManufacturer’s limited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is ideal for Ram 2500 and 3500 owners who want to upgrade their rear suspension for improved handling, ride comfort, and durability. It suits drivers who use their trucks for a combination of daily driving and light to moderate off-road activities. Additionally, it is a great choice for those with mild suspension lifts up to 1 inch seeking a reliable, performance-oriented shock absorber that can handle both street and trail conditions.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848367759572,"sku":"E60-27-006-03-01","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066040_0106_bf139e915b60710bdf98f5cba404562c_38f5d59f-3c8d-4f92-a6fc-a02a87f1ea8c.webp?v=1771724630"},{"product_id":"eibach-13-18-ram-3500-rear-pro-truck-sports-shock","title":"Eibach Pro-Truck Rear Shock (Sold Individually, 0-1.5\" Lift): Ram 3500 2013 - 2018","description":"\u003ch1\u003eEibach Pro-Truck Rear Shock\u003c\/h1\u003e\n\u003ch2\u003e2011–2018 Ram 3500\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-27-009-02-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is engineered to enhance the ride quality and handling of your Ram 3500, whether you're on the street or tackling off-road terrain. Designed specifically for 2011 through 2018 Ram 3500 models, this shock absorber supports lifted suspensions ranging from 0 to 1.5 inches, making it an excellent upgrade for trucks with mild lifts. Sold individually, these shocks deliver superior damping performance and improved control, helping to maintain stability and comfort under heavy loads or rough conditions.\u003c\/p\u003e\n\u003cp\u003eBuilt for truck enthusiasts who demand durability and precision, the Pro-Truck Rear Shock balances rugged construction with refined performance. It is ideal for drivers who want to maintain factory-like ride quality while benefiting from enhanced suspension responsiveness and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock incorporates advanced technology and robust materials to deliver reliable performance:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube high-pressure design for consistent damping and heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston ensures precise control and durability\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft reduces friction and resists corrosion for extended service life\u003c\/li\u003e\n  \u003cli\u003eZinc-coated shock bodies provide superior weather resistance and rust protection\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions from 0 to 1.5 inches, accommodating mild lift setups\u003c\/li\u003e\n  \u003cli\u003ePrecision engineered for both street and off-road driving conditions\u003c\/li\u003e\n  \u003cli\u003eManufactured in the USA with strict quality standards\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty for added peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Truck Rear Shock features a mono-tube design that enhances heat dissipation and maintains consistent damping performance during extended use. The heavy-duty 46mm piston provides robust resistance to wear and tear, ensuring smooth operation even under demanding conditions. The nitro-coated shaft minimizes friction and protects against corrosion, extending the shock’s lifespan. Additionally, the zinc-coated shock body offers excellent protection against environmental elements, making it well-suited for harsh weather and off-road environments.\u003c\/p\u003e\n\u003cp\u003eEvery component is precision engineered and assembled in the United States, reflecting Eibach’s commitment to quality and durability in performance suspension products.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis rear shock is designed for direct bolt-on installation on 2011–2018 Ram 3500 trucks with stock or lifted suspensions up to 1.5 inches. Installation typically requires no special modifications, making it a straightforward upgrade for experienced DIYers or professional installers. For optimal performance and safety, it is recommended to replace shocks in pairs (both left and right sides).\u003c\/p\u003e\n\u003cp\u003ePlease note that this product is sold individually, so purchasing a quantity of two is necessary to complete a full rear shock set.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Rear Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is perfect for Ram 3500 owners seeking improved ride control and durability without sacrificing comfort. It is especially suited for those with mild lift kits (0 to 1.5 inches) who require a shock that can handle both daily driving and off-road excursions. Whether hauling heavy loads or navigating rough terrain, the Pro-Truck Rear Shock offers enhanced stability and confidence behind the wheel.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848367857876,"sku":"E60-27-009-02-01","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066038_0109_bb8a4ffff5ec6400b52e9f7b937c04e7_acebc7ea-a3f8-49a4-b06f-69087e66ec89.webp?v=1771724629"},{"product_id":"eibach-pro-truck-rear-damper-for-2019-ram-1500-2wd","title":"Eibach Pro-Truck Rear Shock (Sold Individually): Ram 1500 2WD 2019 - 2024","description":"\u003ch1\u003eEibach Pro-Truck Rear Shock\u003c\/h1\u003e\n\u003ch2\u003e2019–2024 Ram 1500 2WD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-27-011-03-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is a high-performance replacement shock absorber designed specifically for the 2019 through 2024 Ram 1500 2WD models. Engineered to enhance both on-road handling and off-road capability, this shock absorber delivers improved control, stability, and ride comfort. Ideal for truck owners seeking a durable, reliable upgrade that can accommodate mild suspension lifts, the Pro-Truck shock is perfect for daily driving as well as rugged terrain.\u003c\/p\u003e\n\u003cp\u003eSold individually, these shocks allow you to replace one side at a time or purchase a pair for a complete rear suspension refresh. Eibach’s Pro-Truck shocks are precision engineered to meet the demands of modern trucks, providing consistent damping performance and enhanced vehicle dynamics.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock combines advanced technology and robust construction to deliver superior performance. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube high-pressure design for improved heat dissipation and consistent damping\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston for enhanced durability and precise control\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock bodies for weather resistance and long service life\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions ranging from 0 to 1.5 inches\u003c\/li\u003e\n  \u003cli\u003eDesigned for both street and off-road use, balancing comfort and performance\u003c\/li\u003e\n  \u003cli\u003eMade in the USA with a limited lifetime warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Truck Rear Shock features a mono-tube design that offers superior damping characteristics compared to traditional twin-tube shocks. This design allows for better heat management, reducing fade during extended use. The 46mm piston is engineered to provide firm yet responsive control, ensuring the Ram 1500 maintains composure over rough terrain and during aggressive driving maneuvers.\u003c\/p\u003e\n\u003cp\u003eThe shock shaft is treated with a nitro coating, which minimizes wear and corrosion, extending the life of the component. Additionally, the shock body is zinc coated to withstand harsh weather conditions and resist rust, making it suitable for all climates and environments.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Eibach Pro-Truck Rear Shock is straightforward and designed to be a direct replacement for the factory rear shocks on 2019–2024 Ram 1500 2WD models. No special modifications are required when used within the recommended lift range of 0 to 1.5 inches. For optimal performance and safety, it is recommended to replace shocks in pairs.\u003c\/p\u003e\n\u003cp\u003ePlease note that while this shock can accommodate mild lifts, fitment, ride height, and warranty coverage are not guaranteed for unlisted applications or lifts beyond 1.5 inches.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Rear Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware not included (factory hardware recommended for reuse)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is ideal for Ram 1500 2WD owners who want to upgrade their rear suspension for improved handling and ride quality without sacrificing durability. It suits drivers who use their trucks for daily commuting, light off-roading, towing, or those who have installed a mild lift kit up to 1.5 inches. Enthusiasts seeking a balance between street comfort and off-road capability will find the Pro-Truck shock a reliable and effective solution.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848367923412,"sku":"E60-27-011-03-01","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066036_0110_874bee851925813fd6d2a1301ccb6002_f09c4f17-ef45-4062-9263-96cf1eda3016.webp?v=1771724629"},{"product_id":"eibach-19-20-ram-1500-front-pro-truck-sports-shock","title":"Eibach Pro-Truck Front Shock (Sold Individually): Ram 1500 2019 - 2024 (2WD\/4WD)","description":"\u003ch1\u003eEibach Pro-Truck Front Shock\u003c\/h1\u003e\n\u003ch2\u003e2019–2024 Ram 1500 (2WD\/4WD)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-27-011-03-10\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Shock is a high-performance replacement shock absorber designed specifically for the 2019 through 2024 Ram 1500 models, including both 2WD and 4WD configurations. Sold individually, this shock is engineered to enhance your truck’s handling, ride quality, and off-road capability. Whether you’re navigating city streets or tackling rugged terrain, the Pro-Truck Front Shock delivers superior control and damping performance to improve stability and comfort.\u003c\/p\u003e\n\u003cp\u003eIdeal for truck owners seeking a durable, adjustable suspension upgrade, this shock absorber supports lifting and leveling applications without compromising ride smoothness or vehicle dynamics.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Shock combines advanced engineering with durable materials to provide reliable performance in demanding conditions. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube, high-pressure design for consistent damping and improved heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston for enhanced control and durability\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eAdjustable front spring perch allowing for precise lifting and leveling adjustments\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock bodies offering weather resistance and long service life\u003c\/li\u003e\n  \u003cli\u003eOE spring bottom slot for zero lift and OE spring top slot to maintain level ride height with rear springs\u003c\/li\u003e\n  \u003cli\u003ePrecision engineered for both street and off-road performance\u003c\/li\u003e\n  \u003cli\u003eMade in the U.S.A. with a limited lifetime warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Truck Front Shock features a robust mono-tube construction that enhances shock absorption and heat management compared to traditional twin-tube designs. The heavy-duty 46mm piston ensures smooth and consistent damping, while the nitro-coated shaft minimizes wear and corrosion, extending the shock’s lifespan. Zinc coating on the shock body provides additional protection against harsh weather and road conditions, making it well-suited for off-road use and all-season durability.\u003c\/p\u003e\n\u003cp\u003eThe adjustable front spring perch design allows for easy ride height customization, enabling users to lift or level their Ram 1500 without sacrificing suspension performance or comfort.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is a direct fit for 2019–2024 Ram 1500 trucks with either 2WD or 4WD drivetrains. Sold individually, it is recommended to purchase two units for a complete front suspension upgrade (left and right sides). Installation requires standard suspension tools and basic mechanical knowledge. The adjustable spring perch simplifies lift or leveling modifications, but no major vehicle alterations are necessary.\u003c\/p\u003e\n\u003cp\u003eNote that ride height adjustments should be made using the provided perch slots to maintain proper suspension geometry and ride quality. This product is designed to work with OE springs and is compatible with factory suspension components.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Front Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eAdjustable spring perch for ride height customization\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions and warranty information\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Shock is perfect for Ram 1500 owners who want to improve their truck’s handling, ride comfort, and off-road capability. It suits enthusiasts who perform light to moderate off-roading, daily drivers seeking enhanced suspension performance, and those looking to lift or level their vehicle with a reliable, adjustable shock absorber. Its durable construction and U.S. manufacturing make it a dependable choice for long-term use.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368120020,"sku":"E60-27-011-03-10","price":149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066034_0111_98b546b87c3e8b82de909ffed213b50b_690751e3-6f16-41f4-a5dc-a322667e4d68.webp?v=1771724628"},{"product_id":"eibach-19-ram-1500-pro-truck-rear-reservoir-shock","title":"Eibach Pro-Truck Rear Shock w\/ Reservoir (REAR): Ram 1500 (19-24) 0-1.5\" Lift - Sold Individually","description":"\u003ch1\u003eEibach Pro-Truck Rear Shock w\/ Reservoir\u003c\/h1\u003e\n\u003ch2\u003e2019–2024 Ram 1500 (2WD\/4WD)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-27-011-04-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock with Reservoir is engineered specifically for 2019 to 2024 Ram 1500 trucks, compatible with both 2WD and 4WD models. Designed to accommodate lifted vehicles with 0 to 1.5 inches of lift, this high-performance shock absorber enhances your truck’s off-road capabilities by delivering superior damping control and consistent performance over rough terrain. Sold individually, it is recommended to purchase two units for a complete left and right side setup.\u003c\/p\u003e\n\u003cp\u003eIdeal for truck owners seeking improved ride quality and durability, the Pro-Truck Rear Shock with Reservoir offers advanced technology to handle the demands of lifted trucks, providing enhanced stability, better heat dissipation, and increased fluid capacity for sustained performance during aggressive driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eBuilt to elevate your Ram 1500’s suspension performance, the Pro-Truck Rear Shock incorporates several key features:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExternal piggy-back reservoir design for increased fluid capacity and improved heat dissipation\u003c\/li\u003e\n  \u003cli\u003eMonotube, high-pressure shock construction for consistent damping and responsiveness\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston for enhanced durability and control\u003c\/li\u003e\n  \u003cli\u003eNitro-coated piston shaft to reduce wear and extend service life\u003c\/li\u003e\n  \u003cli\u003eDurable zinc coating to resist corrosion and environmental damage\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum fittings, rod ends, and reservoir clamps for strength and precision\u003c\/li\u003e\n  \u003cli\u003eIncreased travel design optimized for lifted trucks with 0 to 1.5 inches of lift\u003c\/li\u003e\n  \u003cli\u003eEngineered, tested, and manufactured in the USA by Eibach\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is crafted with premium materials and meticulous engineering to withstand the rigors of off-road driving and lifted suspension setups. The monotube design ensures efficient heat dissipation and consistent damping performance, while the external reservoir increases fluid volume to prevent fade during extended use. The piston shaft features a nitro coating that enhances durability and reduces friction, contributing to smoother operation and longer component life.\u003c\/p\u003e\n\u003cp\u003eBillet aluminum components, including fittings and clamps, provide robust structural integrity and corrosion resistance. The zinc coating further protects the shock body from rust and environmental wear, ensuring reliable performance in diverse conditions. This shock absorber is purpose-built for lifted Ram 1500 trucks, delivering increased travel and superior handling characteristics.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Eibach Pro-Truck Rear Shock with Reservoir is straightforward for professional mechanics and experienced enthusiasts. Designed as a direct replacement for the rear shocks on 2019–2024 Ram 1500 models with 0 to 1.5 inches of lift, it requires no major modifications to the suspension system. For optimal performance and safety, it is recommended to replace shocks in pairs—purchasing two units for both left and right rear sides.\u003c\/p\u003e\n\u003cp\u003eProper installation ensures improved ride quality, enhanced off-road capability, and extended shock life. Always verify fitment compatibility with your specific Ram 1500 configuration before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Rear Shock with External Reservoir (sold individually)\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum fittings and reservoir clamps\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware (if applicable, verify with seller)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is ideal for Ram 1500 owners who have lifted their trucks between 0 and 1.5 inches and demand enhanced off-road performance and durability. Whether you use your truck for daily driving, trail riding, or heavy-duty applications, the Pro-Truck Rear Shock delivers improved damping control, heat management, and ride comfort. It is especially suited for enthusiasts seeking a reliable upgrade to handle rough terrain without sacrificing on-road stability.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368152788,"sku":"E60-27-011-04-01","price":290.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066032_0112_abede4a46729161d1fe4d6dbc405dbb7_e9dd536a-7fcd-43e5-bd61-2465650d39ef.webp?v=1771724628"},{"product_id":"eibach-11-14-jeep-grand-cherokee-rear-pro-truck-sport-shock","title":"Eibach Pro-Truck Rear Shock (REAR): Jeep Grand Cherokee (11-21) w\/o Tow Package - Sold Individually","description":"\u003ch1\u003eEibach Pro-Truck Rear Shock\u003c\/h1\u003e\n\u003ch2\u003e2011–2021 Jeep Grand Cherokee (w\/OUT Tow Package, Excluding SRT)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-017-01-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is a high-performance replacement shock absorber designed specifically for Jeep Grand Cherokee models from 2011 through 2021 without the factory tow package and excluding SRT variants. Sold individually, this shock is engineered to enhance your vehicle’s ride quality and handling both on and off the road. It is ideal for Jeep owners seeking improved control, durability, and comfort, especially those running lifted suspensions up to 1.5 inches.\u003c\/p\u003e\n\u003cp\u003eBuilt to meet the demands of rugged terrain and daily driving, the Pro-Truck Rear Shock offers a balanced, compliant ride that maintains stability and responsiveness. Whether you’re upgrading worn factory shocks or enhancing your Jeep’s suspension performance, this Eibach shock absorber delivers precision-engineered quality and reliability.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock incorporates advanced technology and robust construction to provide superior damping and control. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube, high-pressure design for consistent damping performance\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty piston for enhanced durability under demanding conditions\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and increase shock longevity\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions ranging from 0 to 1.5 inches\u003c\/li\u003e\n  \u003cli\u003eFits original equipment rear shock top mounts (part numbers 68029590AF and 68330541AA)\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for Jeep Grand Cherokee models without the factory tow package\u003c\/li\u003e\n  \u003cli\u003eControlled and compliant ride quality for both on-road comfort and off-road capability\u003c\/li\u003e\n  \u003cli\u003eMade in the USA with a limited lifetime warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Truck Rear Shock features a mono-tube design that allows for better heat dissipation and more consistent damping compared to traditional twin-tube shocks. The high-pressure nitrogen gas charge minimizes cavitation and shock fade, ensuring reliable performance over extended use. The heavy-duty piston is engineered to withstand the rigors of off-road driving and lifted suspension setups, while the nitro-coated shaft reduces wear and corrosion, extending the service life of the shock absorber.\u003c\/p\u003e\n\u003cp\u003eManufactured in the USA, this shock absorber meets stringent quality standards and is built to endure harsh environments while maintaining smooth and controlled suspension movement.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is designed as a direct replacement for the original rear shocks on 2011–2021 Jeep Grand Cherokee models without the tow package, excluding SRT versions. It fits OE rear shock top mounts, making installation straightforward with no modifications required for stock or lightly lifted suspensions up to 1.5 inches. For optimal performance and safety, it is recommended to replace shocks in pairs, purchasing two units for both left and right sides.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Rear Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis rear shock is ideal for Jeep Grand Cherokee owners who want to upgrade their suspension for improved handling, ride comfort, and durability without the factory tow package. It suits drivers who frequently encounter off-road conditions or who have lifted their vehicle up to 1.5 inches and require a shock absorber capable of maintaining control and ride quality under these conditions.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368283860,"sku":"E60-51-017-01-01","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066030_0116_451d7ca3159fe8146cc7198289e309b3L_46998771-8d01-4b10-a415-e4a57ddbde79.webp?v=1771724627"},{"product_id":"eibach-11-14-jeep-grand-cherokee-front-pro-truck-sport-shock","title":"Eibach Pro-Truck Front Shock (FRONT): Jeep Grand Cherokee (11-14) 3.6L V6 \/ 5.7L Hemi","description":"\u003ch1\u003eEibach Pro-Truck Front Shock\u003c\/h1\u003e\n\u003ch2\u003e2011–2014 Jeep Grand Cherokee 3.6L V6 \u0026amp; 5.7L Hemi 2WD\/4WD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-017-01-10\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Shock is a high-performance replacement shock absorber designed specifically for the 2011 to 2014 Jeep Grand Cherokee models equipped with 3.6L V6 and 5.7L Hemi engines in both 2WD and 4WD configurations. Sold individually, these shocks deliver enhanced control and improved damping performance for both on-road comfort and off-road capability. Ideal for enthusiasts seeking a balanced ride quality with the ability to accommodate lifted suspensions up to 3 inches, the Pro-Truck Front Shock is engineered to elevate your Jeep’s handling and responsiveness.\u003c\/p\u003e\n\u003cp\u003eWhether you are upgrading your suspension for better off-road performance or replacing worn factory shocks, the Eibach Pro-Truck Front Shock offers a durable and reliable solution that maintains ride compliance without sacrificing control.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eEngineered to meet the demands of rugged terrain and daily driving, the Eibach Pro-Truck Front Shock incorporates advanced technology and robust construction:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube high-pressure design for consistent damping and heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty piston construction to withstand harsh off-road conditions\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft for enhanced corrosion resistance and durability\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions ranging from 0 to 3 inches\u003c\/li\u003e\n  \u003cli\u003ePrecision engineered to fit 2011–2014 Jeep Grand Cherokee 3.6L V6 and 5.7L Hemi engines\u003c\/li\u003e\n  \u003cli\u003eImproved control and handling on both paved roads and off-road trails\u003c\/li\u003e\n  \u003cli\u003eProvides a controlled, compliant ride quality without harshness\u003c\/li\u003e\n  \u003cli\u003eManufactured in the USA with strict quality standards\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty for long-term peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Shock features a mono-tube design that utilizes a high-pressure gas charge to reduce cavitation and maintain consistent damping performance under demanding conditions. The heavy-duty piston is engineered to provide smooth and reliable shock absorption, while the nitro-coated shaft enhances resistance to wear and corrosion, extending the service life of the shock absorber.\u003c\/p\u003e\n\u003cp\u003eBuilt to accommodate lifted suspensions up to 3 inches, these shocks maintain optimal geometry and ride quality, ensuring your Jeep Grand Cherokee performs confidently whether on highways or rugged trails. The robust construction and attention to detail reflect Eibach’s commitment to quality and durability.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Eibach Pro-Truck Front Shock is straightforward for experienced mechanics and enthusiasts familiar with suspension components. Sold individually, it is recommended to purchase two shocks to replace both left and right front units for balanced performance. These shocks are designed to fit directly onto 2011–2014 Jeep Grand Cherokee models with 3.6L V6 and 5.7L Hemi engines in both 2WD and 4WD configurations.\u003c\/p\u003e\n\u003cp\u003eNo major modifications are required for stock or lifted suspensions up to 3 inches. However, fitment and performance are not guaranteed on unlisted applications or lifts exceeding the specified range.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Front Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eManufacturer’s limited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is ideal for Jeep Grand Cherokee owners who want to improve their vehicle’s handling and ride quality without sacrificing comfort. It suits drivers who use their Jeep for a mix of daily driving and off-road adventures, especially those with mild to moderate suspension lifts up to 3 inches. Whether replacing worn factory shocks or upgrading for enhanced performance, the Eibach Pro-Truck Front Shock provides a reliable and durable solution.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368316628,"sku":"E60-51-017-01-10","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066028_0117_5135d10040b946c3fb0bd3a0e8da49b5_537d3483-175b-470e-b425-710377ef56c6.webp?v=1771724627"},{"product_id":"eibach-11-14-jeep-grand-cherokee-rear-pro-truck-sport-shock-1","title":"Eibach Pro-Truck Rear Shock (REAR): Jeep Grand Cherokee (11-17) w\/ Tow Package - Sold Individually","description":"\u003ch1\u003eEibach Pro-Truck Rear Shock\u003c\/h1\u003e\n\u003ch2\u003e2011–2017 Jeep Grand Cherokee (WITH Tow Package, Excluding SRT)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-017-02-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock is a high-performance replacement shock absorber designed specifically for the 2011 to 2017 Jeep Grand Cherokee models equipped with the factory tow package, excluding the SRT variant. Sold individually, this shock absorber enhances your vehicle’s suspension system by delivering superior control and damping performance both on and off the road. Whether you’re towing heavy loads or navigating rugged terrain, the Pro-Truck Rear Shock provides a controlled, compliant ride that improves handling and stability.\u003c\/p\u003e\n\u003cp\u003eEngineered for Jeep enthusiasts who demand durability and precision, this shock absorber is an ideal upgrade for those looking to maintain or improve their Grand Cherokee’s suspension performance without compromising comfort or safety.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Rear Shock incorporates advanced technology and robust construction to meet the demands of towing and off-road driving. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube high-pressure design for consistent damping and heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty piston for enhanced durability under load\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and resist corrosion\u003c\/li\u003e\n  \u003cli\u003ePrecision engineered to fit the OE rear shock top mount (replacement for part 68069680AH)\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions ranging from 0 to 1.5 inches\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for Jeep Grand Cherokee models with the factory tow package\u003c\/li\u003e\n  \u003cli\u003eManufactured in the USA with a limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003eSold individually; purchase two for a complete rear shock set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Truck Rear Shock features a mono-tube design that provides superior damping performance by allowing for better heat dissipation and more consistent shock response compared to traditional twin-tube shocks. The heavy-duty piston is engineered to withstand the stresses of towing and off-road use, ensuring long-lasting performance. The nitro-coated shaft minimizes wear and corrosion, extending the life of the shock absorber even in harsh environments.\u003c\/p\u003e\n\u003cp\u003eEach shock is precision manufactured in the USA to meet strict quality standards, ensuring a perfect fit and reliable operation. The shock mounts directly to the original equipment rear shock top mount, simplifying installation and maintaining factory ride characteristics.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis rear shock is designed as a direct replacement for the factory rear shocks on 2011–2017 Jeep Grand Cherokee models equipped with the tow package, excluding SRT models. It fits the original rear shock top mount (OE replacement part 68069680AH), which is not sold separately and must be used as part of the shock assembly.\u003c\/p\u003e\n\u003cp\u003eThe Pro-Truck Rear Shock can accommodate lifted suspensions up to 1.5 inches, making it suitable for mild suspension lifts without requiring additional modifications. Installation is straightforward for anyone familiar with suspension work, but professional installation is recommended to ensure proper fitment and performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Rear Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is ideal for Jeep Grand Cherokee owners who frequently tow trailers or heavy loads and require enhanced rear suspension performance. It is also well-suited for off-road enthusiasts who want improved control and ride quality without sacrificing durability. Additionally, those with mild suspension lifts (up to 1.5 inches) will benefit from the shock’s compatibility and robust design.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368349396,"sku":"E60-51-017-02-01","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0000852_0118_97b89afecfc133f87fc1eee365644a1f_50504b66-97f1-40d5-94f2-2c97986231ba.webp?v=1771672507"},{"product_id":"eibach-16-21-jeep-grand-cherokee-front-right-pro-truck-shock-0in-3in-lift","title":"Eibach Pro-Truck Front Right Shock: Jeep Grand Cherokee 2018 - 2021 (3.6L V6 \u0026 5.7L Hemi 2WD\/4WD)","description":"\u003ch1\u003eEibach Pro-Truck Front Right Shock\u003c\/h1\u003e\n\u003ch2\u003e2011–2021 Jeep Grand Cherokee 3.6L V6 \u0026amp; 5.7L Hemi 2WD\/4WD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-021-02-10\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Right Shock is engineered specifically for Jeep Grand Cherokee models from 2011 through 2021 equipped with 3.6L V6 and 5.7L Hemi engines in both 2WD and 4WD configurations. Designed to enhance both on-road handling and off-road capability, this performance shock absorber delivers superior control and damping precision. Ideal for enthusiasts seeking improved ride quality and suspension performance, it accommodates lifted suspensions ranging from 0 to 3 inches, making it a versatile upgrade for stock or moderately lifted vehicles.\u003c\/p\u003e\n\u003cp\u003eManufactured in the USA, this shock absorber combines durability with advanced engineering to provide consistent performance in diverse driving conditions, from daily commuting to rugged off-road adventures.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Right Shock incorporates advanced technology and robust construction to meet the demands of Jeep Grand Cherokee owners who require reliable suspension performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube, high-pressure design for enhanced damping control\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston for improved shock absorption and durability\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock body offering weather resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions from 0 to 3 inches\u003c\/li\u003e\n  \u003cli\u003ePrecision engineered for both street and off-road performance\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty for added peace of mind\u003c\/li\u003e\n  \u003cli\u003eMade in the USA with stringent quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Truck shock features a mono-tube design that utilizes a high-pressure nitrogen gas charge to maintain consistent damping performance and reduce shock fade during extended use. The 46mm piston is engineered to provide smooth and responsive control over suspension movement, enhancing vehicle stability and ride comfort.\u003c\/p\u003e\n\u003cp\u003eThe shock shaft is nitro-coated, a process that hardens the surface to minimize wear and corrosion, ensuring long-lasting performance even in harsh environments. The shock body is zinc-coated to protect against rust and weather damage, making it suitable for off-road conditions and varying climates.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Eibach Pro-Truck Front Right Shock is straightforward for technicians familiar with Jeep Grand Cherokee suspension components. It is designed as a direct replacement for the factory front right shock absorber, requiring no modifications for vehicles with stock or lifted suspensions up to 3 inches. For optimal performance and safety, it is recommended to replace shocks in pairs (left and right sides).\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne (1) Eibach Pro-Truck Front Right Shock absorber\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware (if applicable)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is ideal for Jeep Grand Cherokee owners who demand enhanced suspension performance for both daily driving and off-road excursions. It suits those with stock suspensions as well as enthusiasts who have lifted their vehicles up to 3 inches and seek improved control, durability, and ride quality without sacrificing comfort.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368382164,"sku":"E60-51-021-02-10","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066026_0119_2902c306a60b812b1e58566a33921567_fdcfcb63-3eee-48f6-83fb-d302e6d17dbc.webp?v=1771724627"},{"product_id":"eibach-16-21-jeep-grand-cherokee-front-left-pro-truck-shock-0in-3in-lift","title":"Eibach Pro-Truck Front Left Shock: Jeep Grand Cherokee 2018 - 2021 (3.6L V6 \u0026 5.7L Hemi 2WD\/4WD)","description":"\u003ch1\u003eEibach Pro-Truck Front Left Shock\u003c\/h1\u003e\n\u003ch2\u003e2011–2021 Jeep Grand Cherokee 3.6L V6 \u0026amp; 5.7L Hemi 2WD\/4WD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-021-03-10\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Truck Front Left Shock is engineered specifically for Jeep Grand Cherokee models from 2011 through 2021 equipped with 3.6L V6 and 5.7L Hemi engines in both 2WD and 4WD configurations. Designed to enhance both on-road handling and off-road capability, this performance shock absorber delivers superior control, improved damping, and a smoother ride experience.\u003c\/p\u003e\n\u003cp\u003eIdeal for enthusiasts who demand reliable suspension performance whether navigating city streets or tackling rugged terrain, the Pro-Truck shock can accommodate lifted suspensions ranging from 0 to 3 inches, making it a versatile upgrade for lifted or stock vehicles alike.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eBuilt with precision engineering and advanced materials, the Eibach Pro-Truck shock offers a range of features that improve durability and performance:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube high-pressure design for consistent damping and improved heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty 46mm piston for enhanced strength and control\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock bodies that resist weather and environmental damage\u003c\/li\u003e\n  \u003cli\u003eCompatible with lifted suspensions from 0 to 3 inches\u003c\/li\u003e\n  \u003cli\u003eDesigned and manufactured in the USA to strict quality standards\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty for long-term peace of mind\u003c\/li\u003e\n  \u003cli\u003eOptimized for both street driving and off-road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Truck shock features a robust mono-tube construction that provides superior structural integrity and consistent performance under demanding conditions. The high-pressure design enhances damping precision, while the heavy-duty piston ensures reliable operation over extended use. The nitro-coated shaft minimizes wear and corrosion, extending the shock’s lifespan even in harsh environments.\u003c\/p\u003e\n\u003cp\u003eEach shock body is zinc-coated to protect against rust and weathering, ensuring durability through all seasons. This combination of materials and engineering results in a shock absorber that maintains performance and reliability whether on pavement or off the beaten path.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Eibach Pro-Truck Front Left Shock is straightforward for experienced mechanics and enthusiasts familiar with suspension components. It is designed as a direct replacement for the factory front left shock on Jeep Grand Cherokee models from 2011 to 2021 with 3.6L V6 or 5.7L Hemi engines in 2WD or 4WD configurations.\u003c\/p\u003e\n\u003cp\u003eNo major modifications are required for stock or lifted suspensions up to 3 inches. For optimal performance and safety, it is recommended to replace shocks in pairs (left and right sides).\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach Pro-Truck Front Left Shock absorber (Part # E60-51-021-03-10)\u003c\/li\u003e\n  \u003cli\u003eManufacturer’s limited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is ideal for Jeep Grand Cherokee owners seeking enhanced suspension performance for daily driving, weekend off-roading, or lifted vehicle setups. It suits those who want improved ride quality, better handling, and increased durability without sacrificing comfort or reliability.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368414932,"sku":"E60-51-021-03-10","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066024_0120_ee6aa4686f5ea1526431b1964fcd375a_05d156f9-ef46-4130-9bba-9f475156ac66.webp?v=1771724626"},{"product_id":"eibach-18-19-jeep-jl-rubicon-single-rear-pro-truck-sport-shock-2-4in-lift","title":"Eibach PRO-TRUCK Sport Rear Shock Mono-Tube 2-4\" Lift (REAR): Jeep Wrangler Unlimited JL 2018-2025","description":"\u003ch1\u003eEibach PRO-TRUCK Sport Rear Shock Mono-Tube 2-4\" Lift\u003c\/h1\u003e\n\u003ch2\u003e2018–2026 Jeep Wrangler Unlimited JL Rubicon \u0026amp; Sport\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-023-03-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach PRO-TRUCK Sport Rear Shock is engineered specifically for Jeep Wrangler Unlimited JL Rubicon and Sport models from 2018 through 2026. Designed to accommodate lifted suspensions ranging from 2 to 4 inches, this high-performance mono-tube shock absorber enhances both on-road comfort and off-road capability. It delivers superior damping performance that adapts seamlessly to rugged terrain and daily driving conditions, providing a controlled and compliant ride.\u003c\/p\u003e\n\u003cp\u003eIdeal for Jeep enthusiasts who demand durability and improved handling, the PRO-TRUCK Rear Shock ensures optimal vehicle control and ride quality. Whether navigating challenging trails or cruising city streets, this shock absorber upgrades your Wrangler’s suspension system for enhanced performance and reliability.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach PRO-TRUCK Rear Shock combines advanced engineering with robust materials to deliver reliable performance and longevity. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube high-pressure design for consistent damping and superior heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty piston construction engineered to withstand demanding off-road conditions\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft for enhanced corrosion resistance and smooth operation\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock bodies that resist weather and environmental damage\u003c\/li\u003e\n  \u003cli\u003eOptimized specifically for lifted suspensions between 2 and 4 inches\u003c\/li\u003e\n  \u003cli\u003eBalanced ride quality that combines comfort with performance\u003c\/li\u003e\n  \u003cli\u003eMade in the U.S.A. with a limited lifetime warranty for peace of mind\u003c\/li\u003e\n  \u003cli\u003eRecommended use with extended end-link system to maintain proper suspension geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe PRO-TRUCK Rear Shock features a mono-tube design that improves heat dissipation and shock response compared to traditional twin-tube shocks. This design ensures consistent damping forces, providing stable handling over rough terrain and during aggressive driving maneuvers. The heavy-duty piston is precision engineered for durability and performance under extreme conditions.\u003c\/p\u003e\n\u003cp\u003eThe nitro-coated shaft reduces friction and protects against corrosion, extending the shock absorber’s lifespan. Its zinc-coated, weather-resistant shock body is built to endure harsh environments including mud, water, and road salt, making it ideal for off-road use. Every component is meticulously engineered and assembled in the United States, reflecting Eibach’s commitment to quality and durability.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is designed to fit Jeep Wrangler Unlimited JL Rubicon and Sport models from 2018 to 2026 with lifted suspensions between 2 and 4 inches. Sold individually, two shocks are required for a complete rear set (left and right sides). To ensure proper fitment and maintain suspension geometry, an extended end-link system is recommended.\u003c\/p\u003e\n\u003cp\u003eAdditional modifications may be necessary, including extended brake lines or brake line relocation brackets to accommodate the lift. An adjustable rear track bar is also essential to maintain correct drive shaft clearance and alignment. Professional installation is advised to guarantee optimal performance and safety.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach PRO-TRUCK Sport Rear Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThe Eibach PRO-TRUCK Rear Shock is ideal for Jeep Wrangler JL owners who have lifted their vehicles between 2 and 4 inches and seek enhanced suspension performance. It is perfect for off-road enthusiasts requiring durable, reliable shocks capable of handling rough trails, as well as daily drivers who want improved ride comfort and vehicle control. This shock absorber is specifically suited for Rubicon and Sport trims, balancing rugged capability with street-friendly performance.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368480468,"sku":"E60-51-023-03-01","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066021_0122_670bd1c2ee878e53d1ced9676e51d2d9_a71d1fdd-d04a-4e85-ae1d-b2a5aecf8051.webp?v=1771724626"},{"product_id":"eibach-18-19-jeep-jl-rubicon-single-front-pro-truck-sport-shock-2-4in-lift","title":"Eibach PRO-TRUCK Sport Front Shock Mono-Tube 2-4\" Lift (FRONT): Jeep Wrangler Unlimited JL 2018-2025","description":"\u003ch1\u003eEibach PRO-TRUCK Sport Front Shock Mono-Tube 2-4\" Lift\u003c\/h1\u003e\n\u003ch2\u003e2018–2026 Jeep Wrangler Unlimited JL Rubicon \u0026amp; Sport\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-023-03-10\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach PRO-TRUCK Sport Front Shock is a premium replacement shock absorber engineered specifically for the Jeep Wrangler Unlimited JL Rubicon and Sport models from 2018 through 2026. Designed to accommodate lifted suspensions ranging from 2 to 4 inches, this shock absorber enhances both on-road comfort and off-road performance. It delivers improved damping control, ride quality, and vehicle stability, making it an essential upgrade for Jeep enthusiasts who demand durability and superior handling in diverse driving conditions.\u003c\/p\u003e\n\u003cp\u003eWhether navigating rugged trails or cruising urban streets, the PRO-TRUCK Front Shock provides a balanced and compliant ride that maintains responsiveness and control. Sold individually, it allows for precise customization of your Wrangler’s front suspension setup, ensuring optimal performance tailored to your specific lift and driving style.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eBuilt with advanced technology and robust materials, the Eibach PRO-TRUCK Front Shock offers reliable performance and long-lasting durability. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube, high-pressure shock design for superior damping and consistent control\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty piston construction engineered to withstand demanding off-road conditions\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft for enhanced corrosion resistance and smooth operation\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock bodies that resist rust and environmental damage\u003c\/li\u003e\n  \u003cli\u003eOptimized specifically for lifted suspensions between 2 and 4 inches\u003c\/li\u003e\n  \u003cli\u003eDelivers controlled, compliant ride quality on both paved roads and rough terrain\u003c\/li\u003e\n  \u003cli\u003eManufactured in the USA with a limited lifetime warranty for peace of mind\u003c\/li\u003e\n  \u003cli\u003eRecommended use with extended end-link systems and adjustable track bars for proper suspension geometry\u003c\/li\u003e\n  \u003cli\u003eRequires extended brake lines or brake line relocation brackets for correct fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe PRO-TRUCK Front Shock features a mono-tube design that enhances heat dissipation and shock response, ensuring consistent performance during extended use. Its heavy-duty piston is engineered to handle the increased stresses associated with lifted Jeep suspensions, providing reliable damping under harsh conditions.\u003c\/p\u003e\n\u003cp\u003eThe nitro-coated shaft reduces friction and protects against corrosion, contributing to smooth operation and extended service life. The shock body is zinc-coated to resist rust and environmental wear, making it highly durable in off-road environments and varying weather conditions. Every component is precision-engineered to meet the rigorous demands of the Jeep Wrangler JL platform, delivering a robust suspension upgrade that improves vehicle control and ride comfort.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis front shock absorber is designed to fit 2018–2026 Jeep Wrangler Unlimited JL Rubicon and Sport models equipped with 2 to 4-inch lift kits. For a complete front suspension upgrade, two shocks must be purchased (left and right sides). Proper installation requires extended brake lines or brake line relocation brackets, along with an extended end-link system and an adjustable track bar to maintain correct suspension geometry and brake line integrity after lift installation.\u003c\/p\u003e\n\u003cp\u003eProfessional installation is recommended to ensure optimal performance, safety, and fitment. Note that fitment, lift height compatibility, and warranty coverage are not guaranteed outside the specified vehicle models and lift range.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach PRO-TRUCK Front Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThe Eibach PRO-TRUCK Front Shock is ideal for Jeep Wrangler JL owners who have installed or plan to install a 2 to 4-inch suspension lift and seek a durable, high-performance front shock absorber. It is perfect for off-road enthusiasts requiring enhanced damping and control on challenging terrain, as well as daily drivers who want improved ride quality and handling on paved roads. This shock offers a reliable upgrade to maintain factory-level comfort and stability while maximizing the capabilities of a lifted Wrangler suspension.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368513236,"sku":"E60-51-023-03-10","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066018_0123_9a49fac1cfe59d7403c4d4cead5f3e0a_2d096bf1-2ac4-4efe-8851-4c38f6ded7f0.webp?v=1771724625"},{"product_id":"eibach-18-19-jeep-jl-rubicon-pro-steering-stabilizer","title":"Eibach Pro-Steering Stabilizer: Jeep Gladiator (2020-2025) \/ Wrangler (2018-2025)","description":"\u003ch1\u003eEibach Pro-Steering Stabilizer\u003c\/h1\u003e\n\u003ch2\u003e2007–2018 Jeep Wrangler, 2018–2026 Jeep Gladiator, 2018–2026 Jeep Wrangler\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-023-04-10\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Steering Stabilizer is engineered to enhance the steering performance and stability of your Jeep Gladiator and Wrangler models spanning from 2007 through 2026. Designed for off-road enthusiasts and daily drivers alike, this high-quality steering stabilizer reduces unwanted vibrations and improves overall handling precision. By minimizing the stress on critical steering components such as tie rods and ball joints, it extends the lifespan of your vehicle’s steering system while delivering a smoother, more controlled driving experience.\u003c\/p\u003e\n\u003cp\u003eWhether tackling rugged trails or cruising on highways, the Eibach Pro-Steering Stabilizer provides consistent damping performance that enhances driver confidence and vehicle control under various driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eBuilt to meet the demands of Jeep owners seeking improved steering response and durability, the Eibach Pro-Steering Stabilizer offers the following key benefits:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized damping technology for maximum steering stability and control\u003c\/li\u003e\n  \u003cli\u003eSignificantly reduces steering wheel vibration and feedback from rough terrain\u003c\/li\u003e\n  \u003cli\u003eDecreases wear and tear on tie rods and ball joints, extending component life\u003c\/li\u003e\n  \u003cli\u003eImproves on-road handling and reduces driver fatigue during long drives\u003c\/li\u003e\n  \u003cli\u003eDurable construction designed to withstand harsh off-road environments\u003c\/li\u003e\n  \u003cli\u003eCompatible with Jeep Gladiator (2018–2026) and Jeep Wrangler (2007–2018, 2018–2026)\u003c\/li\u003e\n  \u003cli\u003eBacked by Eibach’s Million-Mile Warranty for long-term reliability\u003c\/li\u003e\n  \u003cli\u003eIncludes necessary hardware for straightforward installation (note special OE bolt requirement for mid-2021 and newer Jeep models)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe Eibach Pro-Steering Stabilizer is crafted from premium materials to ensure durability and consistent performance. Its robust design features precision-engineered internal valving that delivers smooth, progressive damping tailored to the unique steering characteristics of Jeep Gladiator and Wrangler vehicles. The stabilizer’s corrosion-resistant finish protects against environmental elements, making it ideal for both on-road and off-road use. Eibach’s commitment to quality ensures that each unit meets stringent standards for strength and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Eibach Pro-Steering Stabilizer is designed to be straightforward for experienced mechanics and knowledgeable enthusiasts. It directly replaces the factory steering stabilizer on compatible Jeep Gladiator and Wrangler models without requiring major modifications. However, Jeep introduced a change to the original equipment (OE) steering stabilizer in mid-2021, updating the damper part number to 68281580AF (or newer). For these newer models, customers must purchase the older style OE bolt (part number 6510774AA) separately to properly install the Eibach stabilizer. Please verify your vehicle’s production date and OE parts before installation to ensure compatibility.\u003c\/p\u003e\n\u003cp\u003eNote that fitment is confirmed for 2007–2018 Jeep Wrangler, 2018–2026 Jeep Gladiator, and 2018–2026 Jeep Wrangler models. Eibach does not guarantee fitment, height compatibility, or warranty coverage on unlisted vehicles or applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEibach Pro-Steering Stabilizer unit\u003c\/li\u003e\n  \u003cli\u003eMounting hardware compatible with specified Jeep models\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis steering stabilizer is ideal for Jeep Gladiator and Wrangler owners who demand enhanced steering control and durability, whether for daily driving, highway cruising, or off-road adventures. It is especially beneficial for vehicles equipped with larger tires or those frequently driven on rough terrain, where steering vibration and component wear are common concerns. Enthusiasts seeking to improve vehicle handling and extend the life of steering components will find the Eibach Pro-Steering Stabilizer a reliable upgrade.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368611540,"sku":"E60-51-023-04-10","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066016_0124_699ddda37e4316f63ee9d2f84295b639_015044f0-bc25-4f23-8900-ff84c1e8a2d7.webp?v=1771724625"},{"product_id":"eibach-2020-jeep-jt-rubicon-single-rear-pro-truck-sport-shock-2-4in-lift","title":"Eibach PRO-TRUCK Sport Rear Shock (REAR): Jeep Gladiator JT 2020-2025 w\/ 2-4\" Lift","description":"\u003ch1\u003eEibach PRO-TRUCK Sport Rear Shock\u003c\/h1\u003e\n\u003ch2\u003e2020–2025 Jeep Gladiator JT\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-024-03-01\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach PRO-TRUCK Sport Rear Shock is a premium replacement shock absorber engineered specifically for the Jeep Gladiator JT models from 2020 through 2025. Designed to accommodate lifted suspensions ranging from 2 to 4 inches, this rear shock enhances your vehicle’s handling, stability, and ride comfort both on and off the road. Whether you’re navigating rugged trails or driving through urban environments, the PRO-TRUCK Rear Shock delivers precise control and improved suspension performance tailored to the unique demands of a lifted Gladiator.\u003c\/p\u003e\n\u003cp\u003eBuilt for Jeep enthusiasts who demand durability and consistent performance, this shock absorber is sold individually, allowing you to purchase the exact quantity needed for your vehicle’s rear left or right side. For optimal suspension balance and performance, a set of two shocks is recommended.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Eibach PRO-TRUCK Sport Rear Shock combines advanced engineering with rugged construction to provide superior damping and long-lasting reliability. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube, high-pressure design for consistent damping and enhanced heat dissipation during extended use\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty piston engineered for precise control and smooth shock absorption over rough terrain\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft to reduce friction and increase wear resistance for extended service life\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-coated shock body offering excellent corrosion and weather resistance\u003c\/li\u003e\n  \u003cli\u003eOptimized specifically for lifted suspensions with 2 to 4 inches of lift\u003c\/li\u003e\n  \u003cli\u003eBalanced ride quality that improves comfort without sacrificing performance\u003c\/li\u003e\n  \u003cli\u003eEngineered for both street driving and demanding off-road conditions\u003c\/li\u003e\n  \u003cli\u003eManufactured in the U.S.A. with a limited lifetime warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe PRO-TRUCK Rear Shock features a robust mono-tube construction that maintains consistent internal pressure, reducing shock fade and delivering reliable damping performance even under extreme conditions. The heavy-duty piston is precision-machined to provide smooth, responsive shock absorption, ensuring your Jeep Gladiator maintains control over uneven surfaces and challenging terrain.\u003c\/p\u003e\n\u003cp\u003eThe shock shaft is treated with a nitro coating, which significantly reduces internal friction and enhances durability, while the zinc-coated shock body protects against corrosion and environmental damage. This combination of materials and engineering results in a shock absorber built to withstand harsh weather and the rigors of off-road use without compromising longevity.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation of the Eibach PRO-TRUCK Sport Rear Shock is straightforward and designed to fit all 2020–2025 Jeep Gladiator JT models equipped with lifted suspensions between 2 and 4 inches. The shock is sold individually, so ordering two units is recommended for a complete rear shock replacement. Typically, no major modifications are required for installation; however, professional installation is advised to ensure proper fitment and optimal performance.\u003c\/p\u003e\n\u003cp\u003eFitment and warranty coverage are guaranteed only for the specified Jeep Gladiator models and lift heights. Use outside these parameters may affect performance and is not covered by warranty.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach PRO-TRUCK Sport Rear Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis shock absorber is ideal for Jeep Gladiator owners who have lifted their trucks between 2 and 4 inches and seek enhanced suspension performance. It is perfect for off-road enthusiasts, daily drivers, and anyone looking to improve ride quality, handling, and durability on a lifted Gladiator platform.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368775380,"sku":"E60-51-024-03-01","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066014_0127_670bd1c2ee878e53d1ced9676e51d2d9_f1e2f0a7-b0cd-48ce-9362-8e9223f3ee2a.webp?v=1771724624"},{"product_id":"eibach-2020-jeep-jt-rubicon-single-front-pro-truck-sport-shock-2-4in-lift","title":"Eibach PRO-TRUCK Sport Front Shock (FRONT): Jeep Gladiator JT 2020-2025 w\/ 2-4\" Lift","description":"\u003ch1\u003eEibach PRO-TRUCK Sport Front Shock\u003c\/h1\u003e\n\u003ch2\u003e2020–2025 Jeep Gladiator JT\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e E60-51-024-03-10\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Eibach PRO-TRUCK Sport Front Shock is a premium replacement shock absorber engineered specifically for Jeep Gladiator JT models from 2020 through 2025. Designed to support lifted suspensions ranging from 2 to 4 inches, this shock absorber enhances vehicle control, stability, and ride comfort across a variety of driving conditions. Whether navigating rugged off-road trails or cruising urban streets, the PRO-TRUCK Front Shock delivers consistent, compliant damping performance that improves handling and driver confidence.\u003c\/p\u003e\n\u003cp\u003eBuilt for Jeep Gladiator enthusiasts who demand durability and superior suspension performance, this shock absorber is an ideal upgrade for lifted trucks seeking a balanced ride without sacrificing toughness or reliability.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eEngineered with advanced technology and premium materials, the Eibach PRO-TRUCK Sport Front Shock offers the following key features:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMono-tube high-pressure design for consistent damping and superior heat dissipation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty piston construction to withstand the stresses of lifted suspension setups\u003c\/li\u003e\n  \u003cli\u003eNitro-coated shaft that reduces friction and resists corrosion for extended service life\u003c\/li\u003e\n  \u003cli\u003eZinc-coated shock body providing long-lasting protection against rust and environmental damage\u003c\/li\u003e\n  \u003cli\u003eSpecifically tuned to accommodate 2 to 4-inch suspension lifts without compromising ride quality\u003c\/li\u003e\n  \u003cli\u003ePrecision engineering for a controlled, compliant ride on both street and off-road terrains\u003c\/li\u003e\n  \u003cli\u003eManufactured in the U.S.A. under strict quality standards\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty for added peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eThe PRO-TRUCK Front Shock features a robust monotube design that excels in shock absorption and heat management compared to traditional twin-tube shocks. This design ensures consistent damping performance even under demanding conditions. The heavy-duty piston is engineered to endure the increased forces generated by lifted suspension systems and aggressive driving.\u003c\/p\u003e\n\u003cp\u003eThe nitro-coated shaft minimizes internal friction and protects against corrosion, extending the shock’s operational lifespan. Additionally, the zinc-coated shock body guards against rust and environmental wear, ensuring reliable performance over time. Every component is precision-crafted to deliver consistent, repeatable damping characteristics that enhance handling, stability, and ride comfort for Jeep Gladiator owners.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis front shock absorber is a direct fit replacement for all 2020 to 2025 Jeep Gladiator JT models equipped with 2 to 4-inch suspension lifts. Installation is straightforward and typically requires no modifications to existing suspension components. For optimal vehicle balance and handling, it is recommended to replace shocks in pairs (both left and right sides).\u003c\/p\u003e\n\u003cp\u003eProfessional installation is advised to ensure proper torque specifications and alignment. Always verify compatibility with your specific lift kit and suspension setup prior to purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Eibach PRO-TRUCK Sport Front Shock absorber (sold individually)\u003c\/li\u003e\n  \u003cli\u003eManufacturer’s limited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThe Eibach PRO-TRUCK Sport Front Shock is ideal for Jeep Gladiator JT owners who have lifted their trucks between 2 and 4 inches and seek enhanced suspension performance. It is perfect for enthusiasts who require a blend of improved on-road comfort and off-road capability. Whether used for daily driving, trail riding, or light to moderate off-road adventures, this shock absorber delivers reliable control, durability, and a refined ride experience.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45848368808148,"sku":"E60-51-024-03-10","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0066012_0128_9a49fac1cfe59d7403c4d4cead5f3e0a_24fbf529-6ac5-47a3-9e78-a268e221e51a.webp?v=1771724624"},{"product_id":"bilstein-5100-series-1997-dodge-ram-1500-laramie-4wd-front-46mm-monotube-shock-absorber","title":"Bilstein B8 5100 Front Shock: Dodge \/ Ram 1500 (94-01, 06-08) \/ 2500 (94-13) \/ 3500 (94-12) 4WD","description":"\u003ch3\u003eBilstein B8 5100 Front Shock w\/ 0-4\" Front Lift\u003c\/h3\u003e\u003cp\u003e94-01 \u0026amp; 06-08 Dodge Ram 1500 4WD\u003c\/p\u003e\u003cp\u003e94-13 Dodge Ram 2500 4WD\u003c\/p\u003e\u003cp\u003e94-12 Dodge Ram 3500 4WD\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e24-185776 \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e14.88\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e24.37\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e378.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e619.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement Mounting Kit : \u003c\/strong\u003eB4-KT1-Z103A00\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860638560\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited Lifetime Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eFront\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926467305684,"sku":"24-185776","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065818_e5cd1680dcb3f8af26b82e42962638e1_dae151cd-0d5a-4776-a302-999da26c15a7.webp?v=1771724602"},{"product_id":"bilstein-b8-5160-series-00-06-suburban-1500-rear-shock-absorber","title":"Bilstein B8 5160 Rear Shock w\/ Reservoir (REAR): Dodge Ram 1500\/2500\/3500 94-18 4WD w\/ Lift","description":"\u003ch3\u003eBilstein B8 5160 Rear Shock (w\/ Reservoir) w\/ 0-2\" Rear Lift\u003c\/h3\u003e\u003cp\u003e06-08 Dodge Ram 1500 4WD\u003c\/p\u003e\u003cp\u003e94-13 Dodge Ram 2500 4WD\u003c\/p\u003e\u003cp\u003e94-12 Dodge Ram 3500 4WD\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e25-311761\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e16.56\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e28.13\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e420.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e714.7\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Reservoir Clamp Included : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860911885\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited 2-Year Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926467403988,"sku":"25-311761","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065815_2b9ab9fc6f1a41fa34e18e49d4c234b6_020f2147-a436-47a1-9089-785c68fba157.webp?v=1771724602"},{"product_id":"bilstein-5100-series-2000-chevrolet-tahoe-lt-rear-46mm-monotube-shock-absorber","title":"Bilstein B8 5100 Rear Shock (REAR): Dodge Ram 1500 \/ 2500 \/ 3500 4WD (94-08) w\/ 0-3\" Lift","description":"\u003ch3\u003eBilstein B8 5100 Rear Shock w\/ 0-3\" Rear Lift\u003c\/h3\u003e\u003cp\u003e94-08 Dodge Ram 1500 4WD\u003c\/p\u003e\u003cp\u003e94-02 Dodge Ram 2500 4WD\u003c\/p\u003e\u003cp\u003e94-02 Dodge Ram 3500 4WD\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e24-185783 \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*Without ZW7 Premium Smooth Ride Nivomat Suspension; Without Z55 Autoride Suspension Package; Without Police Package; Without ZX3 Electronic Suspension Package\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e16.16\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e26.14\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e410.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e664.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860636078\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited Lifetime Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926467600596,"sku":"24-185783","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065812_9d466845b0d0e2a05ec548e7900e4dae_7c6b32f3-9bc7-4eb3-9820-4614ac2386a2.webp?v=1771724601"},{"product_id":"bilstein-5100-series-1999-gmc-sierra-2500-slt-rear-46mm-monotube-shock-absorber","title":"Bilstein B8 5100 Rear Shock w\/ 2-4\" Lift: Dodge Ram 1500 (06-08) \/ 2500 \u0026 3500 4WD (94-13)","description":"\u003ch3\u003eBilstein B8 5100 Rear Shock w\/ 2-4\" Rear Lift\u003c\/h3\u003e\u003cp\u003e06-08 Dodge Ram 1500 4WD\u003c\/p\u003e\u003cp\u003e94-13 Dodge Ram 2500 4WD\u003c\/p\u003e\u003cp\u003e94-12 Dodge Ram 3500 4WD\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e24-186636\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*Without ZX3 Electronic Suspension Package; Without Quadrasteer; With Independent Front Suspension\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e18.17\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e29.92\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e461.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e760.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860482033\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited Lifetime Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926467895508,"sku":"24-186636","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065809_2a3637b2ce3a775b8030acb1380019bb_d82f367a-510e-4b3a-85e9-89258b81ad71.webp?v=1771724601"},{"product_id":"bilstein-5100-series-1999-gmc-sierra-2500-slt-rear-46mm-monotube-shock-absorber-1","title":"Bilstein B8 5100 Rear Shock w\/ 0-5\" Lift: Dodge Ram 1500\/2500\/3500 4WD (94-13)","description":"\u003ch3\u003eBilstein B8 5100 Rear Shock w\/ 0-5\" Rear Lift \u003c\/h3\u003e\u003cp\u003e94-01, 06-08 Dodge Ram 1500 4WD \u003c\/p\u003e\u003cp\u003e94-13 Dodge Ram 2500 4WD \u003c\/p\u003e\u003cp\u003e94-12 Dodge Ram 3500 4WD \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e24-191203\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*Without ZX3 Electronic Suspension Package; Without Quadrasteer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e16.95\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e27.36\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e430.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e695.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860558202\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited Lifetime Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926468059348,"sku":"24-191203","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065806_0ce9711f8c9a47e123a6b0205be7c541_cc336806-4a05-4517-b018-656f1598421d.webp?v=1771724600"},{"product_id":"bilstein-5100-series-2012-ram-3500-st-4wd-rear-46mm-monotube-shock-absorber","title":"Bilstein B8 5100 Rear Shock (REAR): Dodge Ram 1500 (06-08) \/ 2500 \u0026 3500 4WD (94-13) w\/ 3-5\" Lift","description":"\u003ch3\u003eBilstein B8 5100 Rear Shock w\/ 3-5\" Rear Lift\u003c\/h3\u003e\u003cp\u003e06-08 Dodge Ram 1500 4WD\u003c\/p\u003e\u003cp\u003e94-13 Dodge Ram 2500 4WD\u003c\/p\u003e\u003cp\u003e94-12 Dodge Ram 3500 4WD\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e33-187228\u003c\/strong\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e20.37\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e31.93\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e517.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e811.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860656892\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited Lifetime Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926468288724,"sku":"33-187228","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065803_f7ddefe7aa4ccae55df51005de4f842c_1f3c49b0-53e0-48e5-9de3-971dbb5a699f.webp?v=1771724600"},{"product_id":"bilstein-06-08-dodge-ram-1500-b6-4600-front-monotube-shock-absorber","title":"Bilstein B6 4600 Front Shock: Dodge Ram 1500 4WD 2006 - 2008 (Excluding Mega Cab)","description":"\u003ch1\u003eBilstein B6 4600 Front Shock Absorber\u003c\/h1\u003e\n\u003ch2\u003e2002–2010 Dodge Ram 1500 4WD (Excluding Mega Cab)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 24-317801\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 4600 Front Shock Absorber is a premium direct-fit upgrade designed specifically for Dodge Ram 1500 4WD models from 2002 through 2010, excluding Mega Cab variants. Engineered to replace the original equipment (OE) shocks on stock height light trucks and SUVs, this shock absorber delivers enhanced ride quality, improved handling, and greater driver comfort. Ideal for drivers seeking a reliable suspension upgrade that maintains factory ride height while providing superior control and stability.\u003c\/p\u003e\n\u003cp\u003eBuilt with Bilstein’s renowned monotube design, the B6 4600 offers consistent, fade-free performance under a variety of driving conditions. Its velocity-sensitive digressive piston technology adapts to changing road surfaces, ensuring a smooth and controlled ride whether on highways, rough terrain, or off-road trails.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 4600 shock absorber incorporates advanced engineering to optimize suspension performance for Dodge Ram 1500 trucks. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonotube design for consistent, fade-free damping performance\u003c\/li\u003e\n  \u003cli\u003eVelocity-sensitive, digressive piston that reacts dynamically to road conditions\u003c\/li\u003e\n  \u003cli\u003eApplication-specific tuning for optimal ride and handling balance\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OE shocks—no modifications required\u003c\/li\u003e\n  \u003cli\u003eDurable yellow powder-coated finish for corrosion resistance and long-lasting appearance\u003c\/li\u003e\n  \u003cli\u003eIncludes spring seat for proper installation and fitment\u003c\/li\u003e\n  \u003cli\u003eNon-adjustable damping for reliable, maintenance-free operation\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eBilstein’s B6 4600 shocks are engineered with a robust monotube construction that separates gas and oil chambers, preventing foaming and ensuring consistent damping performance. The shock body is crafted from high-strength steel and finished with a corrosion-resistant yellow paint to withstand harsh environmental conditions. The digressive piston design provides a progressive damping curve, allowing the shock to respond softly to small bumps while firming up during aggressive maneuvers or heavy loads.\u003c\/p\u003e\n\u003cp\u003eEach shock absorber is precisely tuned for the Dodge Ram 1500 4WD application, ensuring that suspension travel, damping rates, and spring compatibility deliver a balanced and controlled ride without sacrificing comfort.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 4600 Front Shock is a direct bolt-on replacement for the front shocks on 2002–2010 Dodge Ram 1500 4WD models, excluding Mega Cab. Installation requires no special tools or modifications, making it a straightforward upgrade for DIY enthusiasts and professional installers alike. It is recommended to replace shocks in pairs to maintain balanced suspension performance and vehicle stability.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo (2) Bilstein B6 4600 Front Shock Absorbers\u003c\/li\u003e\n  \u003cli\u003eSpring seats integrated with each shock\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware (if applicable)\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B6 4600 Front Shock is perfect for Dodge Ram 1500 owners who want to restore or improve their truck’s front suspension performance without altering ride height. It suits daily drivers, light off-road enthusiasts, and those who tow or haul moderate loads. This shock absorber enhances vehicle control, reduces body roll, and improves overall driving confidence on and off the pavement.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926468419796,"sku":"24-317801","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065801_c135b5d499ed2867d7e251df87d39b9dL_719a3bdf-1ec8-40e7-87a2-ef04703dd491.webp?v=1771724599"},{"product_id":"bilstein-19-24-dodge-ram-1500-4wd-b8-8100-rear-right-shock-absorber-0-2in-lift","title":"Bilstein B8 8100 Rear Right Shock: Ram 1500 4WD 2019 - 2024 (w\/ 0-2\" Rear Lift)","description":"\u003ch3\u003eBilstein B8 8100 Rear Right Shock w\/ 0-2\" Rear Lift\u003c\/h3\u003e\u003cp\u003e19-24 Ram 1500 4WD\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e25-281873\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e15.69\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e25.76\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e398.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e654.3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eEVO Grey\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e60mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860886831\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited 2-Year Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear Right\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926468518100,"sku":"25-281873","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0012849_0065800_25-281873_2299fecc-51e4-4286-8146-1ebcb50d9a53.webp?v=1771902931"},{"product_id":"bilstein-19-24-dodge-ram-1500-4wd-b8-8100-rear-left-shock-absorber-0-2in-lift","title":"Bilstein B8 8100 Rear Left Shock: Ram 1500 4WD 2019 - 2024 (w\/ 0-2\" Rear Lift)","description":"\u003ch3\u003eBilstein B8 8100 Rear Left Shock w\/ 0-2\" Rear Lift\u003c\/h3\u003e\u003cp\u003e19-24 Ram 1500 4WD\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e25-324075\u003c\/strong\u003e \u003c\/p\u003e\u003cp\u003eBilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e15.69\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e25.76\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e398.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e654.3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eEVO Grey\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e60mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860887111\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited 2-Year Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear Left\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926468583636,"sku":"25-324075","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0012843_0065799_25-281873_e98b35aa-e4d4-46a2-9ee0-8bb2a959bd21.webp?v=1771902930"},{"product_id":"bilstein-14-24-dodge-ram-2500-b8-5160-suspension-shock-absorber-rear-without-air-level-sus","title":"Bilstein B8 5160 Rear Shock w\/ Reservoir (REAR): Ram 2500 (11-26) w\/ 4\" Lift w\/OUT Air Leveling","description":"\u003ch3\u003eBilstein B8 5160 Rear Shock w\/ Reservoir, w\/ 4\" Rear Lift, w\/OUT Air Leveling Suspension\u003c\/h3\u003e\u003cp\u003e14-25 Ram 2500 \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e25-331905\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e18.66\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e28.19\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e474.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e716.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Reservoir Clamp Included : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860938462\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited 2-Year Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926468714708,"sku":"25-331905","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065797_0159_4a6ec01e7633164678e1da3a2c980e9aL_56b6b59c-0629-4646-9fd1-80d0d6b8494b.webp?v=1771724598"},{"product_id":"bilstein-14-24-dodge-ram-2500-4wd-b8-5160-rear-shock-absorber-2in-lift","title":"Bilstein B8 5160 Rear Shock w\/ Reservoir (REAR): Ram 2500 (11-26) w\/ 2\" Lift w\/OUT Air Leveling","description":"\u003ch3\u003eBilstein B8 5160 Rear Shock (w\/ Reservoir, w\/ 2\" Rear Lift, w\/OUT Air Leveling Suspension)\u003c\/h3\u003e\u003cp\u003e14-25 Ram 2500\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e25-331929\u003c\/strong\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e16.75\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e26.69\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e425.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e678.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement Mounting Kit : \u003c\/strong\u003eB4-KT1-Z223A01\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Reservoir Clamp Included : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860938745\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited 2-Year Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926468845780,"sku":"25-331929","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065796_25-281873_7d7f9a1c-5ed3-49a2-9c51-d5c1c1e93265.webp?v=1771724598"},{"product_id":"bilstein-14-24-dodge-ram-2500-13-24-ram-3500-4in-lift-b8-5160-remote-reservoir-shock-front","title":"Bilstein B8 5160 Front Shock (w\/ Reservoir): Ram 2500 (14-24) \u0026 3500 (13-24) w\/ 4\" Front Lift","description":"\u003ch3\u003eBilstein B8 5160 Front Shock (w\/ Reservoir) w\/ 4\" Front Lift\u003c\/h3\u003e\u003cp\u003e14-24 Ram 2500\u003c\/p\u003e\u003cp\u003e13-24 Ram 3500\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e25-331912\u003c\/strong\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e16.66\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e25.47\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e423.2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e647.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement Mounting Kit : \u003c\/strong\u003eB4-KT1-Z270A01\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Reservoir Clamp Included : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860935867\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited 2-Year Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eFront\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926469107924,"sku":"25-331912","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065792_b334b9212bba3d11732f6fb04085cc15L_8de76c87-5da0-4987-893c-f6ab63584280.webp?v=1771724597"},{"product_id":"bilstein-06-08-dodge-ram-1500-4wd-0-2in-lift-5100-series-front-46mm-monotube-shock-absorber","title":"Bilstein B8 5100 Front Shock: Dodge Ram 1500 4WD 2006 - 2008 (w\/ 0-2\" Front Lift)","description":"\u003ch3\u003eBilstein B8 5100 Front Shock w\/ 0-2\" Front Lift\u003c\/h3\u003e\u003cp\u003e06-08 Dodge Ram 1500 4WD\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e24-317795\u003c\/strong\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting.  Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e15.18\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e21.29\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e385.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e540.7\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSnap Ring Grooved Body (Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860917184\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited Lifetime Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eFront\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926469238996,"sku":"24-317795","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065790_9e32d2ab10f2e4ef1c706efd6e8dfa04L_cb53db21-69b6-447e-bf2b-762681f280a9.webp?v=1771724596"},{"product_id":"bilstein-19-24-ram-2500-front-driver-b8-8100-zonecontrol-r-shock-absorber","title":"Bilstein B8 8100 Front Left Shock: Ram 2500 2019 - 2025 (w\/ 2-2.5\" Front Lift)","description":"\u003ch3\u003eBilstein B8 8100 Front Left Shock w\/ 2-2.5\" Front Lift   \u003c\/h3\u003e\u003cp\u003e19-25 Ram 2500\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e25-302226\u003c\/strong\u003e \u003c\/p\u003e\u003cp\u003eBilstein B8 8100 (ZoneControl R) reservoir shock absorbers are a direct fit, position sensitive solution designed for light trucks and SUVs. ZoneControl R is a revolutionary technology delivering position sensitive rebound damping which eliminates harsh suspension top-out events and the need for an external limit strap. The system incorporates a double piston design, offering 2 stages of rebound valving and is supplied with a remote reservoir for increased cooling and an accompanied, bolt-on anodized reservoir chassis mount where applicable. Bilstein B8 8100 (ZoneControl R) position sensitive shocks will offer unparalleled ride comfort during every day driving combined with maximum control over large suspension inputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e14.65\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e22.99\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e372.2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e584.0\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eEVO Grey\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e60mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860911038\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited 2-Year Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eFront Left\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926469370068,"sku":"25-302226","price":664.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065783_bdf2afe6e9269021ff1483c0a1691244_fa0a61ad-f200-4f85-916d-3c14c083c73b.webp?v=1771724596"},{"product_id":"bilstein-19-24-ram-2500-rear-b8-8100-shock-absorber","title":"Bilstein B8 8100 Rear Shock: Ram 2500 2019 - 2025 (w\/ 0-1\" Rear Lift, w\/OUT Air Leveling Suspension)","description":"\u003ch3\u003eBilstein B8 8100 Rear Shock w\/ 0-1\" Rear Lift, w\/OUT Air Leveling Suspension\u003c\/h3\u003e\u003cp\u003e19-25 Ram 2500\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e25-302233\u003c\/strong\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e16.75\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e24.77\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e425.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e629.2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eEVO Grey\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e60mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement Mounting Kit : \u003c\/strong\u003eB4-KT1-Z223A01\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860911076\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited 2-Year Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eRear\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926469599444,"sku":"25-302233","price":626.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065777_e7ec06be60a5d82e38773a446a0200ad_f9980e49-d077-469f-baf3-bb00b9171491.webp?v=1771724596"},{"product_id":"bilstein-14-24-dodge-ram-5160-series-shock-absorber-front-6in-lift","title":"Bilstein B8 5160 Front Shock (w\/ Reservoir): Ram 2500 (14-24) \u0026 3500 (13-24) w\/ 6\" Front Lift","description":"\u003ch3\u003eBilstein B8 5160 Front Shock (w\/ Reservoir) w\/ 6\" Front Lift\u003c\/h3\u003e\u003cp\u003e14-24 Ram 2500\u003c\/p\u003e\u003cp\u003e13-24 Ram 3500\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e25-331936\u003c\/strong\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*PURCHASE QUANTITY 2 FOR BOTH SIDES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (in) : \u003c\/strong\u003e16.96\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (in) : \u003c\/strong\u003e26.74\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsed Length (mm) : \u003c\/strong\u003e430.9\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length (mm) : \u003c\/strong\u003e679.2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish : \u003c\/strong\u003eZinc Plated\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReservoir : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Design : \u003c\/strong\u003eSmooth Body (Non-Coilover)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody Diameter (id) : \u003c\/strong\u003e46mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement Mounting Kit : \u003c\/strong\u003eB4-KT1-Z270A01\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpring Seat Included : \u003c\/strong\u003eNo\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Reservoir Clamp Included : \u003c\/strong\u003eYes\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Damping : \u003c\/strong\u003eNon-Adjustable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity per Vehicle : \u003c\/strong\u003e2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUPC : \u003c\/strong\u003e00651860935898\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty : \u003c\/strong\u003eLimited 2-Year Warranty\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePosition : \u003c\/strong\u003eFront\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45926469730516,"sku":"25-331936","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/0065775_bbd21ffc1cf8b0141de573763beba15aL_7d7cd239-642e-4138-91b2-78505d8176ae.webp?v=1771724594"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/collections\/0000184_F143842602.webp?v=1771741416","url":"https:\/\/fasthemis.com\/collections\/hemi-shocks.oembed?page=2","provider":"FastHemis","version":"1.0","type":"link"}