Home - Shop by Parts - HEMI BRAKE PARTS - Hemi Big Brake Kits
Click on image to zoom

Stoptech 4-Piston Front Big Brake Kit: 300 / Challenger / Charger / Magnum 2005 - 2020 (Exc. SRT)

83.241.4700.71
05-2019 Stoptech Front Big Brake Kit 83.241.4700.71. For 300, Challenger, Charger, Magnum Exc. SRT8. StopTech Big Brake Kit represents the ultimate high performance brake upgrades and gives vehicles that supercar look and feel.
Shipping: Normally ships out in 24-48 hours.
Was: $3,145.00
Sale: $2,830.50
Save: 10%
Save: $314.50

Qty:
Free Shipping!

Description

Stoptech Front Big Brake Kit

05-20 300, Challenger, Charger, Magnum 2.7L, 3.5L, 3.6L V6 & 5.7L V8 (Exc. SRT8)

83.241.4700.71

Caliper Color: Red
Rotor Size: 355x32mm
Caliper Style: 4-Piston

A StopTech Big Brake Kit represents the ultimate high performance brake upgrades and gives vehicles that supercar look and feel.

StopTech Big Brake Kits exceed stock performance in two key areas: First, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel and confidence-inspiring responsiveness.

The key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why StopTech developed the Balanced Brake Upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.

In contrast, a brake upgrade that adds too much front torque (as many do), will reduce your car's ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver's control of brake input.

The Stiffest, Fully Forged 2-piece, Opposed Piston Calipers

StopTech 2-piece calipers have the lowest amount of flex and deflection among 25 of the leading caliper models (including some monoblocks) from well-known manufacturers. This is accomplished using StopTech's patented bolt-in bridge, which is strong enough to stop distortion without sacrificing cooling through the top of the caliper.

The standard StopTech caliper finish is a glossy high temperature paint available in one of six different colors - red, black, silver, blue, yellow and gold. Trophy Sport and Trophy Race Big Brake Kits use weight-optimized STR calipers finished with a deep natural anodized coating that resists fading and discoloration at extreme temperatures.

  • Less vibration

  • Less Noise

  • Better pedal feel under extreme braking conditions

  • Faster braking response

  • Less pad taper

    Patented AeroRotors and AeroHats that offer up to 80% greater airflow

    StopTech has developed several design innovations to improve rotor airflow. The patented 2-piece AeroRotors push more air thanks to curved, airfoil-shaped vanes and an air channel that widens at the trailing edge of the vanes. StopTech aluminum AeroHats are lighter, and feature directional stand-offs between the rotor and mounting hat that increase airflow to the (hotter) outside face of the rotor by over 15%.

  • Specifically engineered and patented AeroVanes for optimum cooling

  • Optimized to provide even performance and consistent feedback

  • Longer pad and rotor life

    Hard Anodized 6061-T6 Billet aluminum Mounting Brackets with Stainless Steel Studs

    Application-specific hardware that is stronger than most competitors, with studs instead of the more commonly used bolts and hard anodized aluminum billet composition.

  • Hard anodized billet aluminum mounting brackets

  • Stainless steel studs secured with set screws for strength and durability

  • Fully machined aluminum or steel that is precise and strong

  • Application specific design for precise and proper fitment

  • All necessary hardware for easy installation

    StopTech Stainless Steel Brake Line Kits

    Braided stainless steel lines reduce system compliance and improve brake pedal feel and modulation. StopTech's Stainless Steel Brake Lines are D.O.T. compliant and designed to fit your vehicle.

  • Stainless steel braiding for lower compliance and extra protection

  • Provides quicker response

  • Firmer pedal feel

  • A variety of fittings for hundreds of applications

  • All necessary brackets and fasteners for easy installation

  • Better brake modulation

  • D.O.T. compliant

    StopTech Street Performance Brake Pads

    StopTech Street Performance Brake Pads are included in all Big Brake Kits besides the track-only Trophy Race Big Brake Kits. StopTech Street Performance Pads are intended for high performance street driving as well as light duty track use.

  • Aggressive pad for high performance street driving

  • Para-aramid composites provide linear response regardless of pad temperature

  • 100% positive molded for uniform friction material density

  • Low dust formulation is rotor friendly and leaves wheels cleaner

  • Scorched to raise initial cold effectiveness and ease bed-in

  • 100% Asbestos-free formulas

    StopTech was founded in March of 1999 with a singular mission: Become the leading manufacturer and supplier of high performance brake components and systems. United by their passion for racing and high performance vehicles, the founding staff sought to challenge the status quo in known brake technology, and set new paradigms for brake upgrade systems.

    In service of the mission, and as a direct result of our ongoing brake research, StopTech has to date received three patents in brake technology and has one patent currently pending.

    StopTech is the first aftermarket brake company to offer balanced front brake upgrades, engineered to dramatically improve overall braking performance while remaining compatible with the stock OE rear brakes. This has significantly advanced the state of art in aftermarket brake upgrades.

    StopTech is now the worldwide leader in Balanced Brake Upgrades for production cars, with over 277 platform offerings. The company consistently wins braking contests performed by independent publications, and is now the dominant, preferred brake system in the SPEED World Challenge® Touring Car Series, the most competitive, production based sprint race series in North America. The company also participates in Grand-Am® Cup, the premier production based endurance racing series in North America.

    Core competencies: StopTech engineers and manufactures high performance brake rotors, calipers, DOT compliant stainless steel lines, and brake upgrade systems for the racing and performance street markets. The company distributes OE aftermarket rotors, brake pads and brake fluid. StopTech's ST-40 and ST-60 calipers are manufactured using a squeeze-forged process.

    Caliper bodies, hats, and brackets are machined to ISO standards at StopTech's manufacturing facilities in Torrance, California using the latest CNC machines that feature active tooling.

    StopTech has received the prestigious TüV approval in Europe for a number of its offerings, and has been selected as the exclusive brake supplier by a major OE aftermarket division.

    The future vision of StopTech is to maintain focus on its original mission. In doing so, the company will continually innovate significant improvements to brake technology for street and racecars, for enthusiasts and professionals alike.

  • Details

    Shipping Information

    • Item Requires Shipping
    • 80.0 lbs.
    • Free Shipping!
    • Normally ships out in 24-48 hours.

    Customer Reviews

    Comment Total Reviews (0)

    Write the First Review!

    You must login to post a review.