{"product_id":"spc-performance-jeep-jk-cams-2","title":"SPC Performance Jeep JK Cams: Jeep Grand Cherokee 1993-1998 \/ Wrangler 2007-2018 3.6L \/ 2.0L Turbo","description":"\u003ch1\u003eSPC Performance Jeep JK Cams\u003c\/h1\u003e\n\u003ch2\u003e1993–1998 Jeep Grand Cherokee 5.2L V8 \/ 4.0L I6, 2007–2018 Jeep Wrangler 3.8L V6 \/ 3.6L V6 \/ 2.0L Turbo\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 82390\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe SPC Performance Jeep JK Cams are precision-engineered components designed to enhance the front axle alignment of select Jeep Grand Cherokee and Wrangler models. These cams replace the factory front axle bolts, allowing for adjustment of caster and pinion angles by up to 3 degrees total. This adjustment capability improves handling, driveline angles, and overall vehicle stability, especially after suspension lifts or modifications.\u003c\/p\u003e\n\u003cp\u003eIdeal for Jeep enthusiasts and off-roaders seeking improved front-end geometry, these cams provide a reliable solution to correct pinion angle and caster changes that occur with suspension upgrades. By optimizing these angles, the SPC cams help reduce driveline vibrations and enhance tire wear characteristics.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eDesigned for precise front axle alignment adjustments, the SPC Performance Jeep JK Cams offer the following benefits:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM front axle bolts to enable caster and pinion angle adjustments up to 3 degrees total\u003c\/li\u003e\n  \u003cli\u003eCompatible with multiple Jeep models including 1993–1998 Grand Cherokee 5.2L V8 and 4.0L I6, and 2007–2018 Wrangler 3.8L V6, 3.6L V6, and 2.0L Turbo engines\u003c\/li\u003e\n  \u003cli\u003eAllows correction of driveline angles to reduce vibrations and improve drivetrain longevity\u003c\/li\u003e\n  \u003cli\u003eWorks in conjunction with SPC’s offset pin joints (part numbers 23510–23540) for additional caster and camber adjustments\u003c\/li\u003e\n  \u003cli\u003eEnables elongation of OEM bolt holes using SPC’s knock out punch tool (#74910) for easier installation and adjustment\u003c\/li\u003e\n  \u003cli\u003eDurable construction designed to withstand off-road conditions and heavy-duty use\u003c\/li\u003e\n  \u003cli\u003eImproves front suspension geometry for enhanced on- and off-road handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eSPC Performance manufactures these cams with high-strength materials engineered to endure the rigors of off-road driving and suspension modifications. The design focuses on durability and precision, ensuring that adjustments to caster and pinion angles remain stable under demanding conditions. The cams are engineered to fit directly in place of the factory front axle bolts, maintaining OEM mounting points while providing enhanced adjustability.\u003c\/p\u003e\n\u003cp\u003eThe ability to elongate the OEM bolt holes using SPC’s knock out punch tool (#74910) allows for fine-tuning alignment without compromising structural integrity. This thoughtful design ensures that the cams integrate seamlessly with existing suspension components and hardware.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation involves replacing the factory front axle bolts with the SPC cams, which then allow for adjustment of caster and pinion angles. To achieve the full range of adjustment, elongation of the OEM bolt holes may be necessary using SPC’s knock out punch tool (#74910). Front caster angle will vary as pinion angle is adjusted, so it is recommended to use SPC’s offset pin joints (part numbers 23510–23540) to further refine caster and camber settings.\u003c\/p\u003e\n\u003cp\u003eThis product fits the following vehicles:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1993–1998 Jeep Grand Cherokee 5.2L V8\u003c\/li\u003e\n  \u003cli\u003e1993–1998 Jeep Grand Cherokee 4.0L I6\u003c\/li\u003e\n  \u003cli\u003e2007–2011 Jeep Wrangler 3.8L V6\u003c\/li\u003e\n  \u003cli\u003e2012–2018 Jeep Wrangler 3.6L V6\u003c\/li\u003e\n  \u003cli\u003e2018 Jeep Wrangler JK 3.6L V6\u003c\/li\u003e\n  \u003cli\u003e2018 Jeep Wrangler 2.0L Turbo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProfessional installation is recommended to ensure proper alignment and torque specifications are met.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance Jeep JK Cams (front axle bolt replacements)\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis product is perfect for Jeep owners who have lifted their vehicles or modified their suspension and require precise front axle alignment adjustments. Off-road enthusiasts, daily drivers seeking improved handling, and anyone looking to reduce driveline vibrations and premature tire wear will benefit from these cams. They are also well-suited for professional mechanics and alignment specialists working on Jeep Grand Cherokee and Wrangler models within the specified years and engine configurations.\u003c\/p\u003e\n\n\u003ch3\u003eEmissions Note\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e WARNING: This product may affect emissions and is not guaranteed to be compliant with California Air Resources Board (CARB) regulations. Please check local laws and regulations before installation.\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":48209062723796,"sku":"82390","price":39.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8542\/1268\/files\/744f6292-d4b0-4656-9ead-dbce1a726786-800.jpg?v=1783234933","url":"https:\/\/fasthemis.com\/products\/spc-performance-jeep-jk-cams-2","provider":"FastHemis","version":"1.0","type":"link"}