Dodge Challenger 08-20 6.4L/6.2L/6.1L/5.7L/3.6L/3.5L
08-23 Dodge Challenger
06-23 Dodge Charger
05-08 Dodge Magnum
UTA112H
Launching harder, reducing wheel hop, and adding cornering consistency is easy with upper trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's rod ended, on-car adjustable trailing arms for Challengers(UTA112) are manufactured from heavy-duty 1-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong trailing arm that eliminates deflection and greatly improves performance. The UTA112 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performance BMR Suspension designed the UTA112 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The UTA112's heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR Suspension! BMR Suspension's UTA112 on-car adjustable upper trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2 hours. Proudly made in the U.S.A. **Recommend for use up to 900 RWHP**
- On-car adjustable design - High-durometer internally fluted polyurethane greasable bushings - Heavy-duty zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends - MIG-welded 1-inch DOM steel tubing - TIG-welded Chrome-moly tube adapters - Dramatically reduces trailing arm flex - Greatly reduces bushing deflection - Improved Performance with acceptable NVH levels - Designed for street performance, drag race, and road race applications - Durable powdercoat finish - 2 hour installation time - Proudly designed in the U.S.A. - Proudly made in the U.S.A. *Recommend for use up to 900 RWHP**
BMR Suspension specializes in heavy-duty performance suspension and chassis parts built for high-load street and race use—especially for muscle car and drag-focused applications. Their lineup includes control arms, panhard bars, K-members, sway bars, and other reinforcements designed to improve traction, stability, and repeatability when you’re launching hard, cornering harder, or simply building a more planted, capable setup.
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
BMR Suspension UTA112H Dodge Challenger 08-20 6.4L/6.2L/6.1L/5.7L/3.6L/3.5L BMR Rear Upper Trailing Arms (On-Car Adj, Black) (REAR). Enhance your car’s performance with BMR Suspension's On-Car Adjustable Trailing Arms, designed to eliminate flex, reduce wheel hop, and deliver superior handling for street, drag, and road race applications.
FREE GROUND SHIPPING
MADE IN THE USA
Adding product to your cart
Dodge Challenger 08-20 6.4L/6.2L/6.1L/5.7L/3.6L/3.5L
08-23 Dodge Challenger
06-23 Dodge Charger
05-08 Dodge Magnum
UTA112H
Launching harder, reducing wheel hop, and adding cornering consistency is easy with upper trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's rod ended, on-car adjustable trailing arms for Challengers(UTA112) are manufactured from heavy-duty 1-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong trailing arm that eliminates deflection and greatly improves performance. The UTA112 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performance BMR Suspension designed the UTA112 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The UTA112's heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR Suspension! BMR Suspension's UTA112 on-car adjustable upper trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2 hours. Proudly made in the U.S.A. **Recommend for use up to 900 RWHP**
- On-car adjustable design - High-durometer internally fluted polyurethane greasable bushings - Heavy-duty zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends - MIG-welded 1-inch DOM steel tubing - TIG-welded Chrome-moly tube adapters - Dramatically reduces trailing arm flex - Greatly reduces bushing deflection - Improved Performance with acceptable NVH levels - Designed for street performance, drag race, and road race applications - Durable powdercoat finish - 2 hour installation time - Proudly designed in the U.S.A. - Proudly made in the U.S.A. *Recommend for use up to 900 RWHP**
BMR Suspension specializes in heavy-duty performance suspension and chassis parts built for high-load street and race use—especially for muscle car and drag-focused applications. Their lineup includes control arms, panhard bars, K-members, sway bars, and other reinforcements designed to improve traction, stability, and repeatability when you’re launching hard, cornering harder, or simply building a more planted, capable setup.
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
