Free shipping on orders over $250
08-23 Dodge Challenger (All Models)
ELK110
The amount of force exerted on the sway bar end link is staggering, especially if you've upgraded to an aftermarket sway bar, like BMR Suspension's adjustable and non-adjustable 2008-2017 Dodge Challenger sway bars. The stock end links are weak and can bend or break. BMR's ELK110 front and rear end link kit allows you to push your Challenger to the limit without fear of end link deflection. BMR manufactures the ELK110s out of CNC-machined billet aluminum bar stock. The links are completed with heavy-duty, Teflon-lined rod ends. The rod ends attach to the sway bar with supplied hardware. This combination of components gives you a huge increase in strength over stock end links. BMR designed the ELK110 front and rear sway bar end link kit for street performance, autocross, and road race applications. BMR's heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMR's ELK110 will not deflect, giving you the full potential of the sway bar, no matter how hard you drive. The adjustable links give you the ability to easily correct sway bar geometry and working angles on lowered Challengers, as well as cars with adjustable sway bars. The ELK110 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMR's adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR Suspension! BMR Suspension's ELK110 sway bar end links are available in a durable black anodized finish for long-lasting good looks. Installation time is about 2 hour. Proudly made in the U.S.A.!
- Fits all 2008-2017 Dodge Challenger - Adjustable design - Durable black anodized finish - On-car adjustable - 6061-T6 billet aluminum construction - Fully CNC-machined - Heavy-duty, Telfon-lines rod ends - Dramatically reduces sway bar end link deflection - Designed to withstand high compression loads - Allows for proper sway bar working angles and geometry on lowered Camaros - Allows for preloading of sway bars to fine-tune suspension setup - Designed for street performance, autocross, and road race applications - 2-hour installation time - Proudly designed in the U.S.A. - Proudly made in the U.S.A.
BMR Suspension specializes in heavy-duty performance suspension and chassis parts built for high-load street and race use—especially for muscle car and drag-focused applications. Their lineup includes control arms, panhard bars, K-members, sway bars, and other reinforcements designed to improve traction, stability, and repeatability when you’re launching hard, cornering harder, or simply building a more planted, capable setup.
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
PART # ELK110
ELK110 BMR 08-23 Dodge Challenger (All Models) Sway Bar End Links (Front & Rear). BMR Suspension’s front and rear sway bar end link kit eliminates end link deflection, providing increased strength and handling performance, with adjustable links to fine-tune suspension geometry for street, autocross, and road race applications.
FREE GROUND SHIPPING
MADE IN THE USA
Adding product to your cart
08-23 Dodge Challenger (All Models)
ELK110
The amount of force exerted on the sway bar end link is staggering, especially if you've upgraded to an aftermarket sway bar, like BMR Suspension's adjustable and non-adjustable 2008-2017 Dodge Challenger sway bars. The stock end links are weak and can bend or break. BMR's ELK110 front and rear end link kit allows you to push your Challenger to the limit without fear of end link deflection. BMR manufactures the ELK110s out of CNC-machined billet aluminum bar stock. The links are completed with heavy-duty, Teflon-lined rod ends. The rod ends attach to the sway bar with supplied hardware. This combination of components gives you a huge increase in strength over stock end links. BMR designed the ELK110 front and rear sway bar end link kit for street performance, autocross, and road race applications. BMR's heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMR's ELK110 will not deflect, giving you the full potential of the sway bar, no matter how hard you drive. The adjustable links give you the ability to easily correct sway bar geometry and working angles on lowered Challengers, as well as cars with adjustable sway bars. The ELK110 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMR's adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR Suspension! BMR Suspension's ELK110 sway bar end links are available in a durable black anodized finish for long-lasting good looks. Installation time is about 2 hour. Proudly made in the U.S.A.!
- Fits all 2008-2017 Dodge Challenger - Adjustable design - Durable black anodized finish - On-car adjustable - 6061-T6 billet aluminum construction - Fully CNC-machined - Heavy-duty, Telfon-lines rod ends - Dramatically reduces sway bar end link deflection - Designed to withstand high compression loads - Allows for proper sway bar working angles and geometry on lowered Camaros - Allows for preloading of sway bars to fine-tune suspension setup - Designed for street performance, autocross, and road race applications - 2-hour installation time - Proudly designed in the U.S.A. - Proudly made in the U.S.A.
BMR Suspension specializes in heavy-duty performance suspension and chassis parts built for high-load street and race use—especially for muscle car and drag-focused applications. Their lineup includes control arms, panhard bars, K-members, sway bars, and other reinforcements designed to improve traction, stability, and repeatability when you’re launching hard, cornering harder, or simply building a more planted, capable setup.
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
