Fuel Injector Clinic 1650cc Fuel Injectors
11-25 Jeep / Dodge / Ram / Chrysler 3.6L V6
IS232-1650H
Fuel Injector Clinic 1650cc high-impedance injectors are engineered for 3.6L V6 vehicles requiring reliable high-performance fuel delivery. Flow-matched with Data Match Technology, these injectors provide precise control over flow and latency, optimizing drivability across idle, part throttle, and full throttle conditions. Rated at 1650cc/min (160 lbs/hr) at 3 Bar (43.5 psi) and 180 lbs/hr (1900cc/min) at OE 58 psi (4 Bar), these saturated ball-and-seat injectors maintain excellent low-end performance while supporting higher horsepower output on gasoline and E85. Constructed with stainless alloy valves, they are compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each injector is individually serial-numbered and supplied with a Data Match Sheet to provide complete flow and latency verification. Flow-tested at 43.5 psi (3 Bar) at 90°F using CF-16B calibration fluid, these injectors offer superior short pulse width control for smooth engine operation. The set includes all o-rings for factory-style installation. For unusual or aftermarket setups, FIC recommends confirming fit before purchase. Installation requires either soldering the included pigtails or using optional plug-and-play adaptors to match the factory harness.
- 6x 1650cc/min (160 lbs/hr) at 3 Bar, 180 lbs/hr (1900cc/min) at OE 58 psi (4 Bar)
- High-impedance saturated ball-and-seat design
- Flow-matched using proprietary Data Match Technology
- Individually serial-numbered with detailed Data Match Sheet
- Excellent low-end throttle response and high-output capability
- Compatible with gasoline, E85, and most MTBE oxygenated race fuels
- Flow-tested at 43.5 psi (3 Bar) using CF-16B calibration fluid
- Plug-and-play fitment or solder-in pigtails for easy installation
- Includes all o-rings for factory-style installation
- 100% new injectors, no remanufactured cores
Fuel Injector Clinic (FIC) specializes in high-performance fuel injectors and injector services with precise matching and ECU data to support clean tuning from idle to wide-open throttle. Their injectors are commonly used on gasoline and E85 builds where accurate fueling and reliable high-flow performance are critical.
Fuel Injector Clinic 1650cc Fuel Injectors: Jeep / Dodge / Ram / Chrysler 3.6L V6 2011 - 2024
- Unit price
- /per
What does the Available to Promise date mean?
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
IS232-1650H Fuel Injector Clinic 11-25 Jeep / Dodge / Ram / Chrysler 3.6L V6 1650cc Fuel Injectors. Fuel Injector Clinic 1650cc high-impedance injectors deliver precise fuel flow and exceptional drivability for 3.6L V6 vehicles. This 6-injector set is flow-matched with Data Match Technology, ensuring accurate performance at low and high pulse widths. Plug-and-play fitment or optional solder-in pigtails allow easy installation, while each injector is serial-numbered and backed by a lifetime warranty.
FREE GROUND SHIPPING
MADE IN THE USA
Adding product to your cart
Fuel Injector Clinic 1650cc Fuel Injectors
11-25 Jeep / Dodge / Ram / Chrysler 3.6L V6
IS232-1650H
Fuel Injector Clinic 1650cc high-impedance injectors are engineered for 3.6L V6 vehicles requiring reliable high-performance fuel delivery. Flow-matched with Data Match Technology, these injectors provide precise control over flow and latency, optimizing drivability across idle, part throttle, and full throttle conditions. Rated at 1650cc/min (160 lbs/hr) at 3 Bar (43.5 psi) and 180 lbs/hr (1900cc/min) at OE 58 psi (4 Bar), these saturated ball-and-seat injectors maintain excellent low-end performance while supporting higher horsepower output on gasoline and E85. Constructed with stainless alloy valves, they are compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each injector is individually serial-numbered and supplied with a Data Match Sheet to provide complete flow and latency verification. Flow-tested at 43.5 psi (3 Bar) at 90°F using CF-16B calibration fluid, these injectors offer superior short pulse width control for smooth engine operation. The set includes all o-rings for factory-style installation. For unusual or aftermarket setups, FIC recommends confirming fit before purchase. Installation requires either soldering the included pigtails or using optional plug-and-play adaptors to match the factory harness.
- 6x 1650cc/min (160 lbs/hr) at 3 Bar, 180 lbs/hr (1900cc/min) at OE 58 psi (4 Bar)
- High-impedance saturated ball-and-seat design
- Flow-matched using proprietary Data Match Technology
- Individually serial-numbered with detailed Data Match Sheet
- Excellent low-end throttle response and high-output capability
- Compatible with gasoline, E85, and most MTBE oxygenated race fuels
- Flow-tested at 43.5 psi (3 Bar) using CF-16B calibration fluid
- Plug-and-play fitment or solder-in pigtails for easy installation
- Includes all o-rings for factory-style installation
- 100% new injectors, no remanufactured cores
Fuel Injector Clinic (FIC) specializes in high-performance fuel injectors and injector services with precise matching and ECU data to support clean tuning from idle to wide-open throttle. Their injectors are commonly used on gasoline and E85 builds where accurate fueling and reliable high-flow performance are critical.
-
-
YEARMAKEMODELSUBMODEL2011 - 2024Chrysler3003.6L V62011 - 2023DodgeChallenger3.6L V62011 - 2023DodgeCharger3.6L V62011 - 2025DodgeDurango3.6L V62020 - 2025JeepGladiator3.6L V62011 - 2025JeepGrand Cherokee3.6L V62012 - 2025JeepWrangler3.6L V62011 - 2025Ram15003.6L V6
-
Standard shipping
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
-
Standard shipping
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.