Eagle HEMI Stroker Connecting Rods
Chrysler Modern HEMI Stroker Engines
CRS6125SO3D2000
Overview:
The Eagle HEMI Stroker 6.125-inch H-Beam Connecting Rods are precision-engineered components designed specifically for Chrysler modern HEMI stroker engines. Crafted for high-performance and competition applications, these rods provide exceptional strength and durability to withstand the rigors of increased power and high RPM operation. Ideal for engine builders and racers seeking reliable, weight-matched rods that maintain exact tolerances for optimal engine balance and longevity.
These connecting rods are a critical upgrade for anyone looking to enhance their HEMI stroker build with components that deliver consistent performance under demanding conditions.
Key Features:
Engineered for strength, precision, and reliability, the Eagle HEMI Stroker Connecting Rods offer the following key features:
- Forged from premium 4340 steel for superior tensile strength and fatigue resistance
- H-Beam design optimized for maximum rigidity and reduced weight
- Manufactured from a two-piece forging process ensuring structural integrity
- Fully machined and shot-peened surfaces to enhance durability and stress resistance
- Precision sizing held to exact tolerances for consistent fitment and performance
- Sold as a weight-matched set to maintain engine balance and smooth operation
- Equipped with high-quality ARP 2000 bolts for increased clamping force and reliability
- Recommended torque specification of 75 ft-lbs using ARP moly lube for proper installation
- Designed specifically for 6.125" rod length and 2.000" rod journal dimensions
Construction & Design:
Each connecting rod is forged from 4340 chromoly steel, a material known for its excellent strength-to-weight ratio and resistance to fatigue and wear. The two-piece forging process ensures a uniform grain structure and superior mechanical properties throughout the rod. After forging, the rods undergo full machining to achieve precise dimensions and a smooth finish, followed by shot-peening to induce beneficial compressive stresses that improve fatigue life.
The H-Beam configuration provides an optimal balance between strength and weight, reducing reciprocating mass while maintaining the rigidity needed to handle high cylinder pressures and RPMs typical of stroked HEMI engines. The inclusion of ARP 2000 bolts further enhances the assembly’s ability to withstand extreme loads without stretching or failure.
Installation & Fitment:
These connecting rods are designed for direct fitment in Chrysler modern HEMI stroker engines with a 6.125-inch rod length and 2.000-inch rod journal. Installation requires standard engine assembly procedures, with careful attention to torque specifications. Use ARP moly lube on the bolts and torque them to 75 ft-lbs to ensure proper clamping force and longevity. Due to their competition-grade construction, these rods are best suited for professional engine builders or experienced enthusiasts familiar with high-performance engine assembly.
What's Included:
- Set of weight-matched Eagle 4340 forged H-Beam connecting rods (6.125" length)
- ARP 2000 high-strength connecting rod bolts
Ideal For:
These Eagle HEMI Stroker Connecting Rods are ideal for:
- Engine builders upgrading Chrysler modern HEMI stroker engines for increased displacement and power
- Racers and performance enthusiasts seeking durable, high-strength connecting rods for competition use
- Anyone requiring precision-balanced rods to maintain engine smoothness and reliability at high RPMs
- Applications demanding robust components capable of handling elevated cylinder pressures and loads
Eagle Specialty Products manufactures high-strength engine components—most notably connecting rods and crankshafts—intended for performance and racing engines. These rotating-assembly upgrades are commonly used in builds that demand higher strength margins for boost, nitrous, sustained RPM, or competition use.
Add your collapsible row content here.
Eagle Chrysler Late Model HEMI Stroker 6.125in H-Beam Connecting Rods
- Unit price
- /per
What does the Available to Promise date mean?
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
Eagle HEMI Stroker 6.125in H-Beam Connecting Rods are forged from durable 4340 steel for exceptional strength and reliability. Designed to handle high power levels, these rods feature precise sizing and shot-peened surfaces for enhanced durability. Equipped with ARP 2000 bolts, they provide superior fastening strength, making them ideal for competition use. Specifically built for Chrysler Modern HEMI Stroker engines, these rods support increased performance and engine longevity under demanding conditions.
FREE GROUND SHIPPING
Adding product to your cart
Eagle HEMI Stroker Connecting Rods
Chrysler Modern HEMI Stroker Engines
CRS6125SO3D2000
Overview:
The Eagle HEMI Stroker 6.125-inch H-Beam Connecting Rods are precision-engineered components designed specifically for Chrysler modern HEMI stroker engines. Crafted for high-performance and competition applications, these rods provide exceptional strength and durability to withstand the rigors of increased power and high RPM operation. Ideal for engine builders and racers seeking reliable, weight-matched rods that maintain exact tolerances for optimal engine balance and longevity.
These connecting rods are a critical upgrade for anyone looking to enhance their HEMI stroker build with components that deliver consistent performance under demanding conditions.
Key Features:
Engineered for strength, precision, and reliability, the Eagle HEMI Stroker Connecting Rods offer the following key features:
- Forged from premium 4340 steel for superior tensile strength and fatigue resistance
- H-Beam design optimized for maximum rigidity and reduced weight
- Manufactured from a two-piece forging process ensuring structural integrity
- Fully machined and shot-peened surfaces to enhance durability and stress resistance
- Precision sizing held to exact tolerances for consistent fitment and performance
- Sold as a weight-matched set to maintain engine balance and smooth operation
- Equipped with high-quality ARP 2000 bolts for increased clamping force and reliability
- Recommended torque specification of 75 ft-lbs using ARP moly lube for proper installation
- Designed specifically for 6.125" rod length and 2.000" rod journal dimensions
Construction & Design:
Each connecting rod is forged from 4340 chromoly steel, a material known for its excellent strength-to-weight ratio and resistance to fatigue and wear. The two-piece forging process ensures a uniform grain structure and superior mechanical properties throughout the rod. After forging, the rods undergo full machining to achieve precise dimensions and a smooth finish, followed by shot-peening to induce beneficial compressive stresses that improve fatigue life.
The H-Beam configuration provides an optimal balance between strength and weight, reducing reciprocating mass while maintaining the rigidity needed to handle high cylinder pressures and RPMs typical of stroked HEMI engines. The inclusion of ARP 2000 bolts further enhances the assembly’s ability to withstand extreme loads without stretching or failure.
Installation & Fitment:
These connecting rods are designed for direct fitment in Chrysler modern HEMI stroker engines with a 6.125-inch rod length and 2.000-inch rod journal. Installation requires standard engine assembly procedures, with careful attention to torque specifications. Use ARP moly lube on the bolts and torque them to 75 ft-lbs to ensure proper clamping force and longevity. Due to their competition-grade construction, these rods are best suited for professional engine builders or experienced enthusiasts familiar with high-performance engine assembly.
What's Included:
- Set of weight-matched Eagle 4340 forged H-Beam connecting rods (6.125" length)
- ARP 2000 high-strength connecting rod bolts
Ideal For:
These Eagle HEMI Stroker Connecting Rods are ideal for:
- Engine builders upgrading Chrysler modern HEMI stroker engines for increased displacement and power
- Racers and performance enthusiasts seeking durable, high-strength connecting rods for competition use
- Anyone requiring precision-balanced rods to maintain engine smoothness and reliability at high RPMs
- Applications demanding robust components capable of handling elevated cylinder pressures and loads
Eagle Specialty Products manufactures high-strength engine components—most notably connecting rods and crankshafts—intended for performance and racing engines. These rotating-assembly upgrades are commonly used in builds that demand higher strength margins for boost, nitrous, sustained RPM, or competition use.
Add your collapsible row content here.
-
-
Standard shipping
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Standard shipping
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.