WHAT'S INCLUDED
WHAT'S INCLUDED
-
YEARMAKEMODELSUBMODEL2014 - 2025Ram25006.4L 3922014 - 2025Ram35006.4L 392
YEAR
MAKE
MODEL
SUBMODEL
2014 - 2025
Ram
2500
6.4L 392
2014 - 2025
Ram
3500
6.4L 392
USE COUPON CODE "SUMMER26"
The BTR Stage 2 Camshaft is a high-performance upgrade for 6.4L 392 HEMI engines, delivering up to 88 additional horsepower and 80 lb/ft of torque with an extra 1,200 RPM of usable operating range. Meticulously designed and validated through spintron and dyno testing, it provides significant power gains while maintaining near-OEM drivability. VVT limiter included.
Hylift Johnson OE-style drop-in hydraulic roller lifters replace your factory MDS lifters with non-MDS units, eliminating cylinder deactivation. Forged steel construction with a fully supported roller bearing ensures durability and smooth operation. Direct drop-in fit using your existing OEM anti-rotation retainers - no modifications needed.
BTR Beehive Valve Springs are designed specifically for 6.4L 392 HEMI cam upgrades, delivering 140 lbs at installed height and 400 lbs at open. Tested on both engine dyno and spintron for validated performance and longevity. Kit includes 16 springs, beehive locators, valve seals, and shims - uses stock HEMI locks and retainers.
BTR Chromoly One-Piece Intake Pushrods are constructed from SAE 4130 chromoly tubing, centerless ground and case hardened to Rc 60 for maximum durability. Each pushrod is precision machined to +/-.001" tolerance and finished in black oxide with laser-etched specs. Set of 8 - 6.775" length, 5/16" diameter, .080" wall.
BTR Chromoly One-Piece Exhaust Pushrods are constructed from SAE 4130 chromoly tubing, centerless ground and case hardened to Rc 60 for maximum durability. Each pushrod is precision machined to +/-.001" tolerance and finished in black oxide with laser-etched specs. Set of 8 - 8.075" length, 5/16" diameter, .080" wall.
OEM Mopar MDS block-off plugs replace the MDS solenoids on Gen III HEMI engines when deleting the Multi-Displacement System. Required when upgrading to non-MDS lifters during a cam swap. 4 plugs needed per engine, sold individually.
The BTR VVT Phaser Tool locks the VVT phaser spring in place, allowing safe disassembly of the phaser on Gen III HEMI engines. Essential for cam swaps, phaser limiter installation, or general VVT phaser service on 2009+ HEMI applications.
OEM Mopar camshaft bolt (M12x1.75x95mm) and crankshaft bolt - the two critical engine fasteners to replace during a cam swap. The cam bolt secures the VVT phaser to the camshaft, while the crank bolt fastens the harmonic balancer. Replacing both provides peace of mind on fasteners that endure high torque loads.
OEM Mopar front crankshaft seal and timing cover gasket - the two essential sealing components for any cam swap that requires timing cover removal. The front crank seal prevents oil leaks at the harmonic balancer, while the timing cover gasket seals the cover to the engine block. Both are must-replace items any time the timing cover comes off.
The Cometic Street Pro MLX Top End Gasket Kit features multi-layer steel head gaskets engineered for high clamping force and durability on the 6.4L 392 HEMI. Precision cut for a 4.150" bore with .054" thickness, this comprehensive kit includes all essential gaskets and seals for a complete top-end rebuild. Aramid fiber and corrosion-resistant alloys ensure long-lasting performance under demanding street conditions.
Victor Reinz cylinder head bolts are precision-engineered, high-strength steel fasteners with a corrosion-resistant coating. They deliver OEM-spec clamping force to secure the cylinder heads and prevent gasket leaks. Recommended replacement any time the heads are pulled during a cam or top-end build.
Cam up your 2014+ Ram 6.4L HEMI and ditch the MDS system in one shot. The FastHemis One Click Brian Tooley Stage 2 Master Camshaft / MDS Conversion Kit includes every hard part you need — cam, lifters, valve springs, pushrods, gaskets, seals, bolts, and tools — hand-selected and bundled so you can skip the parts-list guesswork and get straight to building power.
Every component in this kit has been curated by FastHemis for guaranteed compatibility and a no-hassle install. One click, one cart, one kit — just add fluids and tuning. The BTR Stage 2 cam delivers up to 88 additional horsepower and 80 lb/ft of torque with a mild change in idle quality, all while working with stock converters.
Adding product to your cart
The BTR Stage 2 Camshaft is a high-performance upgrade for 6.4L 392 HEMI engines, delivering up to 88 additional horsepower and 80 lb/ft of torque with an extra 1,200 RPM of usable operating range. Meticulously designed and validated through spintron and dyno testing, it provides significant power gains while maintaining near-OEM drivability. VVT limiter included.
Hylift Johnson OE-style drop-in hydraulic roller lifters replace your factory MDS lifters with non-MDS units, eliminating cylinder deactivation. Forged steel construction with a fully supported roller bearing ensures durability and smooth operation. Direct drop-in fit using your existing OEM anti-rotation retainers - no modifications needed.
BTR Beehive Valve Springs are designed specifically for 6.4L 392 HEMI cam upgrades, delivering 140 lbs at installed height and 400 lbs at open. Tested on both engine dyno and spintron for validated performance and longevity. Kit includes 16 springs, beehive locators, valve seals, and shims - uses stock HEMI locks and retainers.
BTR Chromoly One-Piece Intake Pushrods are constructed from SAE 4130 chromoly tubing, centerless ground and case hardened to Rc 60 for maximum durability. Each pushrod is precision machined to +/-.001" tolerance and finished in black oxide with laser-etched specs. Set of 8 - 6.775" length, 5/16" diameter, .080" wall.
BTR Chromoly One-Piece Exhaust Pushrods are constructed from SAE 4130 chromoly tubing, centerless ground and case hardened to Rc 60 for maximum durability. Each pushrod is precision machined to +/-.001" tolerance and finished in black oxide with laser-etched specs. Set of 8 - 8.075" length, 5/16" diameter, .080" wall.
OEM Mopar MDS block-off plugs replace the MDS solenoids on Gen III HEMI engines when deleting the Multi-Displacement System. Required when upgrading to non-MDS lifters during a cam swap. 4 plugs needed per engine, sold individually.
The BTR VVT Phaser Tool locks the VVT phaser spring in place, allowing safe disassembly of the phaser on Gen III HEMI engines. Essential for cam swaps, phaser limiter installation, or general VVT phaser service on 2009+ HEMI applications.
OEM Mopar camshaft bolt (M12x1.75x95mm) and crankshaft bolt - the two critical engine fasteners to replace during a cam swap. The cam bolt secures the VVT phaser to the camshaft, while the crank bolt fastens the harmonic balancer. Replacing both provides peace of mind on fasteners that endure high torque loads.
OEM Mopar front crankshaft seal and timing cover gasket - the two essential sealing components for any cam swap that requires timing cover removal. The front crank seal prevents oil leaks at the harmonic balancer, while the timing cover gasket seals the cover to the engine block. Both are must-replace items any time the timing cover comes off.
The Cometic Street Pro MLX Top End Gasket Kit features multi-layer steel head gaskets engineered for high clamping force and durability on the 6.4L 392 HEMI. Precision cut for a 4.150" bore with .054" thickness, this comprehensive kit includes all essential gaskets and seals for a complete top-end rebuild. Aramid fiber and corrosion-resistant alloys ensure long-lasting performance under demanding street conditions.
Victor Reinz cylinder head bolts are precision-engineered, high-strength steel fasteners with a corrosion-resistant coating. They deliver OEM-spec clamping force to secure the cylinder heads and prevent gasket leaks. Recommended replacement any time the heads are pulled during a cam or top-end build.
Building a cam swap parts list for your 6.4L 392 HEMI means tracking down a camshaft, lifters, valve springs, pushrods, gaskets, seals, bolts, and specialty tools from multiple vendors - and hoping everything is compatible. FastHemis eliminates that headache entirely. This One Click Stage 2 Master Kit is a curated, one-click solution that includes every hard part you need to cam your 392 HEMI and delete the MDS system in a single purchase. Every component has been hand-selected for guaranteed fitment and proven reliability, so you spend less time researching part numbers and more time building power. Just add fluids and tuning.
The FastHemis One Click Stage 2 Master Kit is a complete cam swap and MDS conversion package for the 2014+ Ram 6.4L 392 HEMI, built around BTR's Stage 2 grind for the Gen III HEMI. The Stage 2 cam is paired with Hylift Johnson non-MDS lifters and BTR beehive valve springs to form a fully compatible valvetrain system that handles the increased lift and RPM demands. BTR chromoly pushrods in both intake and exhaust lengths ensure precise valvetrain geometry, while OEM Mopar MDS block-off plugs cleanly eliminate the cylinder deactivation system.
On the sealing and fastener side, this kit leaves nothing to chance. A Cometic Street Pro MLX top-end gasket kit and Victor Reinz head bolts ensure leak-free cylinder head sealing, while OEM Mopar camshaft and crankshaft bolts replace the two most critical fasteners in the install. A fresh front crank seal and timing cover gasket seal everything back up once the timing cover goes on, and the included BTR VVT Phaser Tool makes phaser disassembly and limiter installation straightforward. Every part in this bundle has been selected by FastHemis so that nothing is missing, nothing is incompatible, and nothing gets overlooked.
The BTR Stage 2 Camshaft is the foundation of this kit's performance gains, delivering up to 88 additional horsepower and 80 lb/ft of torque over the stock cam. Dyno testing shows power gains beginning at 2,300 RPM and climbing strongly past 6,700 RPM, with peak output reaching approximately 573 horsepower at the crank on a properly equipped 6.4L 392 HEMI. The camshaft's profile produces a mild change in idle quality - a subtle, aggressive rumble - while maintaining smooth drivability and compatibility with factory torque converters. Proper VVT calibration and engine tuning are essential to fully realize this cam's potential.
This master bundle combines premium performance components with OEM-quality hardware for a complete, no-compromise cam swap:
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Building a cam swap parts list for your 6.4L 392 HEMI means tracking down a camshaft, lifters, valve springs, pushrods, gaskets, seals, bolts, and specialty tools from multiple vendors - and hoping everything is compatible. FastHemis eliminates that headache entirely. This One Click Stage 2 Master Kit is a curated, one-click solution that includes every hard part you need to cam your 392 HEMI and delete the MDS system in a single purchase. Every component has been hand-selected for guaranteed fitment and proven reliability, so you spend less time researching part numbers and more time building power. Just add fluids and tuning.
The FastHemis One Click Stage 2 Master Kit is a complete cam swap and MDS conversion package for the 2014+ Ram 6.4L 392 HEMI, built around BTR's Stage 2 grind for the Gen III HEMI. The Stage 2 cam is paired with Hylift Johnson non-MDS lifters and BTR beehive valve springs to form a fully compatible valvetrain system that handles the increased lift and RPM demands. BTR chromoly pushrods in both intake and exhaust lengths ensure precise valvetrain geometry, while OEM Mopar MDS block-off plugs cleanly eliminate the cylinder deactivation system.
On the sealing and fastener side, this kit leaves nothing to chance. A Cometic Street Pro MLX top-end gasket kit and Victor Reinz head bolts ensure leak-free cylinder head sealing, while OEM Mopar camshaft and crankshaft bolts replace the two most critical fasteners in the install. A fresh front crank seal and timing cover gasket seal everything back up once the timing cover goes on, and the included BTR VVT Phaser Tool makes phaser disassembly and limiter installation straightforward. Every part in this bundle has been selected by FastHemis so that nothing is missing, nothing is incompatible, and nothing gets overlooked.
The BTR Stage 2 Camshaft is the foundation of this kit's performance gains, delivering up to 88 additional horsepower and 80 lb/ft of torque over the stock cam. Dyno testing shows power gains beginning at 2,300 RPM and climbing strongly past 6,700 RPM, with peak output reaching approximately 573 horsepower at the crank on a properly equipped 6.4L 392 HEMI. The camshaft's profile produces a mild change in idle quality - a subtle, aggressive rumble - while maintaining smooth drivability and compatibility with factory torque converters. Proper VVT calibration and engine tuning are essential to fully realize this cam's potential.
This master bundle combines premium performance components with OEM-quality hardware for a complete, no-compromise cam swap:
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.