Brian Tooley Racing 6.4L 392 Hemi Stage 2 Camshaft

12-24 Chrysler 300 6.4L 392

11-23 Dodge Challenger 6.4L 392

12-23 Dodge Charger 6.4L 392

18-25 Dodge Durango 6.4L 392

14-25 Ram 6.4L 392 (2500 / 3500)

12-21 Jeep Grand Cherokee 6.4L 392

22-25 Jeep Grand Wagoneer 6.4L 392

21-25 Jeep Wrangler Rubicon 6.4L 392

BTR-64HEMIVVTSTG2 - Stage 2 Camshaft - 224/241, .611/.608, 111.5 LSA

*PLEASE READ OUR HEMI CAMSHAFT BUYERS GUIDE

Brian Tooley Racing proudly unveils the latest breakthrough in the dynamic world of the Gen III HEMI. Our Gen III HEMI camshafts stand as a testament to our commitment to innovation, crafted in response to the evolving landscape of high-performance demands. Whether you're conquering rugged terrains in a Ram truck or unleashing power on the streets in a Chrysler, Dodge, Jeep or Ram, our meticulously curated Gen III 6.4 HEMI cam lineup is poised to meet and exceed your every need.

Elevate your engine's performance with our ‘Stage 2’ Camshaft. Meticulously crafted in-house, we design and develop the lobes with a delicate balance of performance and stability in mind. Rigorous spintron and dyno testing validate its superior performance and durability, making it the choice for enthusiasts seeking a noticeable upgrade.

The ‘Stage 2’ grind is a popular choice for those looking to delete MDS or add some pep to their 6.4L HEMI's step. With significant power gains and near OEM driving characteristics, this camshaft works well with stock converters.

573+ HP at the crank of your 6.4L Hemi is what you can expect with our ‘Stage 2’ camshaft. This ‘Stage 2’ grind provides an additional 1200 RPM of usable operating range while maintaining drivability. On the BTR Dyno, we observed gains over the factory cam above 2300 RPM, with a peak gain of 88 HP and 80 lb/ft. The ‘Stage 2’ continues to pull strong past 6700 RPM!

DETAILS:

• Engine Family: GEN III 2011+ 6.4L 392 Hemi APPLICATIONS

• VVT Limiter REQUIRED : BTR-VVT-HEMI-4CAM (Included with cam)

• Recommended Valve Springs: SK024

• Valve Tip Saver: HEMILC-16

• Lifters REQUIRED: Non-MDS (MDS Conversion required) 05038784AD, 2356, 2326

• Intake Duration @ .050” Lift: 224

• Exhaust Duration @ .050” Lift: 241

• Lobe Separation Angle: 111.5

• Intake Valve Lift: .611

• Exhaust Valve Lift: .608

• RPM Operating Range: 1800-6700

• Mild change in idle quality

• Chop Scale: 3/10

• Expected Cam Swap Gains: 88 Horsepower, 80 Ft/lbs, extra 1200 RPM of operating range

• Torque Converter Characteristics: Works well with factory converters!

• Drivability: Drivability: Mild, Daily Drivable

• HEMI VVT Limiter Installation Tool: BTR-VVT-Hemi-Tool

• HEMI Valve Spring Compressor Tool: BTRHemiSpringTool

• Made in the USA!

NOTE: The use of a BTR aftermarket spring kit is required due to high valve lift and increased rpm potential in combination with the heavy OEM valves. We also recommend the use of hardened pushrods in power adder applications.

NOTE: To take advantage of this grind, it is imperative to utilize VVT control and engine tuning. A proper calibration with attention to detail in this respect will make this camshaft SHINE! *See Cam Card for recommended Holley VVT Target Table.*

NOTE: The ‘Stage 2’ Camshaft requires the use of a VVT ‘Limiter’ (BTR-VVT-HEMI-4CAM) to be installed in your cam phaser. This is included in the camshaft box; no need to purchase. However, if you do not already have the required installation tool (BTR-VVT-Hemi-Tool), you will need to purchase the tool separately.

Brian Tooley Racing (BTR) is a powerhouse in modern V8 performance, offering camshafts, valvetrain components, and supporting engine hardware for platforms like GM LS/LT, Chrysler Hemi, and Ford Godzilla. Built with real-world performance targets in mind, BTR parts are engineered to help enthusiasts unlock power, improve drivability for their combo, and support reliable RPM where it counts.