Holley EFI Terminator X Max Gen III HEMI EFI Controller
2003–2013+ Chrysler 5.7L / 6.1L / 6.4L GEN III HEMI Engines
550-1422
Overview:
The Holley EFI Terminator X Max Gen III HEMI EFI Controller is a comprehensive engine management solution designed specifically for Chrysler GEN III HEMI engines produced from 2003 through 2013 and beyond. Compatible with 5.7L, 6.1L, and 6.4L engines equipped with the factory Drive-by-Wire (DBW) throttle body, this controller is tailored for non-VVT applications. Whether you’re building a street-driven muscle car, a track-ready race machine, or a boosted setup, the Terminator X Max delivers precise fuel and ignition control with advanced features that simplify tuning and maximize engine performance.
Equipped with a user-friendly 3.5-inch touchscreen handheld and backed by Holley EFI’s industry-leading software suite, this system offers both plug-and-play convenience and deep customization options. It comes preloaded with base maps for common HEMI engine configurations, enabling quick startup and fast tuning to get you on the road or track without delay.
Key Features:
The Terminator X Max EFI Controller integrates advanced technology and versatile inputs/outputs to meet the demands of modern performance builds. Key features include:
- Plug-and-play compatibility with Chrysler GEN III HEMI 5.7L, 6.1L, and 6.4L engines (2003–2013+) using factory DBW throttle bodies (non-VVT only)
- High impedance injector drivers supporting Holley EFI and most stock injectors (EV1 injector harness included)
- Integrated Bosch LSU 4.9 wideband O2 sensors for accurate air/fuel ratio monitoring and precise tuning
- Built-in 1 bar MAP sensor with option to disable for external MAP sensor use, ideal for boosted applications
- Four programmable inputs and outputs supporting electric fans, boost control solenoids, nitrous activation, and more
- Advanced boost control strategies including boost vs. time, gear, RPM, and speed, plus boost safeties
- Comprehensive nitrous control with channels for wet/dry, progressive or non-progressive operation, and closed-loop AFR targeting
- Multiple advanced fuel and ignition tables (1D and 2D) for flexible tuning configurations
- On-board diagnostic LEDs for quick status checks of ECU power, engine run, TPS calibration, cam signal, and other critical parameters
- Compact ECU design (7.45” x 4.1” x 1.66”) allowing versatile mounting options
- Includes free Holley EFI tuning software for laptop-based advanced calibration and data logging
Construction & Design:
The Terminator X Max EFI Controller features a rugged, compact ECU engineered for durability and ease of installation in a variety of engine bays. Its solid-state electronics are housed in a corrosion-resistant enclosure designed to withstand the harsh automotive environment. The included handheld touchscreen is ergonomically designed for intuitive navigation, featuring a bright 3.5-inch LCD that simplifies calibration and real-time monitoring. Holley’s engineering ensures seamless integration with factory sensors and actuators, minimizing wiring complexity and installation time.
Installation & Fitment:
This EFI controller is designed for straightforward plug-and-play installation on Chrysler GEN III HEMI engines from 2003 to 2013+ with factory Drive-by-Wire throttle bodies, excluding VVT models. The kit includes an EV1 injector harness and vacuum hose adapters in multiple sizes (1/8”, 1/4”, and 3/16”) to facilitate sensor connections. The internal MAP sensor can be disabled to accommodate external MAP sensors for boosted setups, with a terminated connector included for easy integration. The compact ECU can be mounted in virtually any convenient location, but diagnostic LEDs should face upward for proper visibility.
What's Included:
- Terminator X Max Gen III HEMI EFI Controller ECU
- 3.5” touchscreen handheld controller with calibration wizard
- EV1 injector harness
- Bosch LSU 4.9 wideband O2 sensors
- Vacuum hose adapters (1/8”, 1/4”, 3/16”)
- Terminated connector for external MAP sensor
- Free Holley EFI tuning software for laptop
- Comprehensive base maps for common HEMI engine combinations
Ideal For:
The Holley EFI Terminator X Max is ideal for enthusiasts and professional builders seeking a reliable, feature-rich EFI solution for Chrysler GEN III HEMI engines without variable valve timing. It suits a wide range of applications from naturally aspirated street cars to boosted race vehicles and nitrous-equipped setups. Its combination of plug-and-play ease and advanced tuning capabilities makes it perfect for both first-time EFI users and experienced tuners looking for precise control and expandability at a competitive price point.
Holley EFI delivers standalone engine management and EFI systems built for everything from engine swaps to serious horsepower builds. With platforms like Sniper, Terminator X, HP, and Dominator, Holley EFI is aimed at enthusiasts who want modern tuning control, data, and drivability—whether it’s a street car, track car, or full-on race program.
Holley EFI Terminator X Max Gen III HEMI EFI Controller: 5.7L / 6.1L / 6.4L Engines (2003-2015)
- Unit price
- /per
What does the Available to Promise date mean?
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
550-1422 Holley EFI 03-15 Chrysler 300 / 03-10 Dodge Ram 1500 Terminator X Max Gen III HEMI EFI Controller. The Terminator X Max EFI Controller offers plug-and-play tuning for 5.7L, 6.1L, and 6.4L Chrysler GEN III HEMI engines with factory drive-by-wire throttle bodies. Featuring real-time fuel learning, high impedance injector drivers, and an integrated 1bar MAP sensor, it supports advanced boost and nitrous control. The included 3.5” touchscreen handheld and free Holley EFI software make tuning accessible for beginners and pros alike, delivering precise control and quick setup for street or race applications.
FREE GROUND SHIPPING
Adding product to your cart
Holley EFI Terminator X Max Gen III HEMI EFI Controller
2003–2013+ Chrysler 5.7L / 6.1L / 6.4L GEN III HEMI Engines
550-1422
Overview:
The Holley EFI Terminator X Max Gen III HEMI EFI Controller is a comprehensive engine management solution designed specifically for Chrysler GEN III HEMI engines produced from 2003 through 2013 and beyond. Compatible with 5.7L, 6.1L, and 6.4L engines equipped with the factory Drive-by-Wire (DBW) throttle body, this controller is tailored for non-VVT applications. Whether you’re building a street-driven muscle car, a track-ready race machine, or a boosted setup, the Terminator X Max delivers precise fuel and ignition control with advanced features that simplify tuning and maximize engine performance.
Equipped with a user-friendly 3.5-inch touchscreen handheld and backed by Holley EFI’s industry-leading software suite, this system offers both plug-and-play convenience and deep customization options. It comes preloaded with base maps for common HEMI engine configurations, enabling quick startup and fast tuning to get you on the road or track without delay.
Key Features:
The Terminator X Max EFI Controller integrates advanced technology and versatile inputs/outputs to meet the demands of modern performance builds. Key features include:
- Plug-and-play compatibility with Chrysler GEN III HEMI 5.7L, 6.1L, and 6.4L engines (2003–2013+) using factory DBW throttle bodies (non-VVT only)
- High impedance injector drivers supporting Holley EFI and most stock injectors (EV1 injector harness included)
- Integrated Bosch LSU 4.9 wideband O2 sensors for accurate air/fuel ratio monitoring and precise tuning
- Built-in 1 bar MAP sensor with option to disable for external MAP sensor use, ideal for boosted applications
- Four programmable inputs and outputs supporting electric fans, boost control solenoids, nitrous activation, and more
- Advanced boost control strategies including boost vs. time, gear, RPM, and speed, plus boost safeties
- Comprehensive nitrous control with channels for wet/dry, progressive or non-progressive operation, and closed-loop AFR targeting
- Multiple advanced fuel and ignition tables (1D and 2D) for flexible tuning configurations
- On-board diagnostic LEDs for quick status checks of ECU power, engine run, TPS calibration, cam signal, and other critical parameters
- Compact ECU design (7.45” x 4.1” x 1.66”) allowing versatile mounting options
- Includes free Holley EFI tuning software for laptop-based advanced calibration and data logging
Construction & Design:
The Terminator X Max EFI Controller features a rugged, compact ECU engineered for durability and ease of installation in a variety of engine bays. Its solid-state electronics are housed in a corrosion-resistant enclosure designed to withstand the harsh automotive environment. The included handheld touchscreen is ergonomically designed for intuitive navigation, featuring a bright 3.5-inch LCD that simplifies calibration and real-time monitoring. Holley’s engineering ensures seamless integration with factory sensors and actuators, minimizing wiring complexity and installation time.
Installation & Fitment:
This EFI controller is designed for straightforward plug-and-play installation on Chrysler GEN III HEMI engines from 2003 to 2013+ with factory Drive-by-Wire throttle bodies, excluding VVT models. The kit includes an EV1 injector harness and vacuum hose adapters in multiple sizes (1/8”, 1/4”, and 3/16”) to facilitate sensor connections. The internal MAP sensor can be disabled to accommodate external MAP sensors for boosted setups, with a terminated connector included for easy integration. The compact ECU can be mounted in virtually any convenient location, but diagnostic LEDs should face upward for proper visibility.
What's Included:
- Terminator X Max Gen III HEMI EFI Controller ECU
- 3.5” touchscreen handheld controller with calibration wizard
- EV1 injector harness
- Bosch LSU 4.9 wideband O2 sensors
- Vacuum hose adapters (1/8”, 1/4”, 3/16”)
- Terminated connector for external MAP sensor
- Free Holley EFI tuning software for laptop
- Comprehensive base maps for common HEMI engine combinations
Ideal For:
The Holley EFI Terminator X Max is ideal for enthusiasts and professional builders seeking a reliable, feature-rich EFI solution for Chrysler GEN III HEMI engines without variable valve timing. It suits a wide range of applications from naturally aspirated street cars to boosted race vehicles and nitrous-equipped setups. Its combination of plug-and-play ease and advanced tuning capabilities makes it perfect for both first-time EFI users and experienced tuners looking for precise control and expandability at a competitive price point.
Holley EFI delivers standalone engine management and EFI systems built for everything from engine swaps to serious horsepower builds. With platforms like Sniper, Terminator X, HP, and Dominator, Holley EFI is aimed at enthusiasts who want modern tuning control, data, and drivability—whether it’s a street car, track car, or full-on race program.
-
-
YEARMAKEMODELSUBMODEL2012 - 2014Chrysler3006.4L 3922006 - 2010Chrysler300C6.1L SRT82002 - 2010DodgeRam5.7L Hemi
-
Standard shipping
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Standard shipping
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.