DSS Racing FX Series Forged Piston Set
Fits Most Chrysler / Dodge / Jeep / Ram 5.7L Hemi Models
1-6723-3937 / 2-6723-3937 / 3-6723-3937 / K1-6723-3937 / K2-6723-3937 / K3-6723-3937
Overview:
The DSS Racing FX Series Forged Piston Set is engineered specifically for Chrysler, Dodge, Jeep, and Ram vehicles equipped with the 5.7L Hemi engine. Designed to meet the demands of high-performance and rebuild applications, these pistons offer exceptional strength and durability. Whether you are upgrading your engine for increased power or replacing worn components, this piston set provides a reliable foundation for enhanced engine performance.
Built to exacting standards, the FX Series pistons feature a forged construction that withstands high combustion pressures and temperatures. Their design supports both full-floating and press-fit wrist pins, accommodating various engine builds and preferences. With a bore size of 3.937 inches and a stroke of 3.578 inches, these pistons maintain optimal geometry for the 348 Small Block Mopar Hemi Gen III platform.
Key Features:
These DSS Racing pistons incorporate advanced design elements to ensure performance and longevity:
- Forged construction for superior strength and resistance to heat and stress
- FX Series comp height of 1.21 inches for precise piston-to-deck clearance
- 12cc dish top design to optimize combustion chamber volume and compression ratio
- .945-inch wrist pin diameter compatible with full-floating or press-fit configurations
- Ring groove dimensions of 1.2mm/1.2mm/3mm for reliable ring sealing and reduced friction
- Designed for a 3.578-inch stroke and 6.243-inch connecting rod length
- Available in multiple dish volumes (65cc, 74cc, 85cc) to tailor compression ratios from approximately 9.38:1 down to 7.79:1
- Precision manufacturing ensures consistent fitment and performance across all pistons in the set
Construction & Design:
The FX Series pistons are crafted from high-grade forged aluminum alloy, delivering an ideal balance of lightweight strength and thermal conductivity. This material choice helps reduce reciprocating mass, improving engine response and durability under demanding conditions. The pistons feature a dish top design with a -12cc volume to optimize combustion efficiency and reduce the risk of detonation in boosted or high-compression setups.
Each piston is machined with tight tolerances to ensure proper ring groove dimensions and wrist pin fitment. The option for full-floating or press-fit wrist pins allows builders to customize the assembly based on engine use and performance goals. The robust design accommodates the 3.937-inch bore size common to many Mopar 5.7L Hemi rebuilds and upgrades.
Installation & Fitment:
This piston set is designed to fit most Chrysler, Dodge, Jeep, and Ram 5.7L Hemi engines, including the 348 Small Block Mopar Hemi Gen III platform. Installation requires standard engine rebuilding procedures, including proper honing of the cylinder bores and careful measurement of piston-to-wall clearance. The pistons are compatible with the factory stroke of 3.578 inches and connecting rod length of 6.243 inches, ensuring straightforward integration into stock or modified bottom ends.
Builders should verify compression ratio requirements and select the appropriate piston dish volume to match their cylinder head combustion chamber size and gasket thickness. Professional installation is recommended to achieve optimal engine performance and reliability.
What's Included:
- Set of forged FX Series pistons (quantity as required for engine rebuild)
- Wrist pins compatible with full-floating or press-fit installation
- Detailed specifications for bore size, stroke, and ring groove dimensions
Ideal For:
This piston set is ideal for automotive enthusiasts, engine builders, and professional shops working on Chrysler, Dodge, Jeep, or Ram 5.7L Hemi engines. It suits applications ranging from street performance upgrades to motorsport and high-output rebuilds where durability and precision are critical. Whether restoring a worn engine or building a high-performance powerplant, these pistons provide a reliable foundation for enhanced combustion and power delivery.
DSS Racing — Founded in 1983 originally as Danny’s Speed Shop, DSS Racing has grown from a small Midwest performance engine shop into a respected name in forged engine components for the high-performance and racing markets. Based in St. Charles, Illinois, DSS is best known for its forged pistons and machined engine parts made in the USA that have been used in championship engines and thousands of builds, blending old-school racing roots with precision manufacturing for enthusiasts and racers alike.
DSS Racing FX Series Forged Piston Set 3.937" Bore: Fits Chrysler / Dodge / Jeep / Ram 5.7L Hemi
- Unit price
- /per
What does the Available to Promise date mean?
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
1-6723-3937 / 2-6723-3937 / 3-6723-3937 / K1-6723-3937 / K2-6723-3937 / K3-6723-3937 DSS Racing 05-23 Chrysler / Dodge / Jeep / Ram 5.7L Hemi FX Series Forged Piston Set. Designed for high-performance 5.7L Hemi engines, these forged pistons offer exceptional strength and durability. Featuring a 3.937" bore, -12cc dish top, and precise ring grooves, they deliver improved combustion efficiency and power output. Ideal for enthusiasts seeking reliable, race-ready components that withstand extreme conditions while enhancing engine response and longevity.
FREE GROUND SHIPPING
MADE IN THE USA
Adding product to your cart
DSS Racing FX Series Forged Piston Set
Fits Most Chrysler / Dodge / Jeep / Ram 5.7L Hemi Models
1-6723-3937 / 2-6723-3937 / 3-6723-3937 / K1-6723-3937 / K2-6723-3937 / K3-6723-3937
Overview:
The DSS Racing FX Series Forged Piston Set is engineered specifically for Chrysler, Dodge, Jeep, and Ram vehicles equipped with the 5.7L Hemi engine. Designed to meet the demands of high-performance and rebuild applications, these pistons offer exceptional strength and durability. Whether you are upgrading your engine for increased power or replacing worn components, this piston set provides a reliable foundation for enhanced engine performance.
Built to exacting standards, the FX Series pistons feature a forged construction that withstands high combustion pressures and temperatures. Their design supports both full-floating and press-fit wrist pins, accommodating various engine builds and preferences. With a bore size of 3.937 inches and a stroke of 3.578 inches, these pistons maintain optimal geometry for the 348 Small Block Mopar Hemi Gen III platform.
Key Features:
These DSS Racing pistons incorporate advanced design elements to ensure performance and longevity:
- Forged construction for superior strength and resistance to heat and stress
- FX Series comp height of 1.21 inches for precise piston-to-deck clearance
- 12cc dish top design to optimize combustion chamber volume and compression ratio
- .945-inch wrist pin diameter compatible with full-floating or press-fit configurations
- Ring groove dimensions of 1.2mm/1.2mm/3mm for reliable ring sealing and reduced friction
- Designed for a 3.578-inch stroke and 6.243-inch connecting rod length
- Available in multiple dish volumes (65cc, 74cc, 85cc) to tailor compression ratios from approximately 9.38:1 down to 7.79:1
- Precision manufacturing ensures consistent fitment and performance across all pistons in the set
Construction & Design:
The FX Series pistons are crafted from high-grade forged aluminum alloy, delivering an ideal balance of lightweight strength and thermal conductivity. This material choice helps reduce reciprocating mass, improving engine response and durability under demanding conditions. The pistons feature a dish top design with a -12cc volume to optimize combustion efficiency and reduce the risk of detonation in boosted or high-compression setups.
Each piston is machined with tight tolerances to ensure proper ring groove dimensions and wrist pin fitment. The option for full-floating or press-fit wrist pins allows builders to customize the assembly based on engine use and performance goals. The robust design accommodates the 3.937-inch bore size common to many Mopar 5.7L Hemi rebuilds and upgrades.
Installation & Fitment:
This piston set is designed to fit most Chrysler, Dodge, Jeep, and Ram 5.7L Hemi engines, including the 348 Small Block Mopar Hemi Gen III platform. Installation requires standard engine rebuilding procedures, including proper honing of the cylinder bores and careful measurement of piston-to-wall clearance. The pistons are compatible with the factory stroke of 3.578 inches and connecting rod length of 6.243 inches, ensuring straightforward integration into stock or modified bottom ends.
Builders should verify compression ratio requirements and select the appropriate piston dish volume to match their cylinder head combustion chamber size and gasket thickness. Professional installation is recommended to achieve optimal engine performance and reliability.
What's Included:
- Set of forged FX Series pistons (quantity as required for engine rebuild)
- Wrist pins compatible with full-floating or press-fit installation
- Detailed specifications for bore size, stroke, and ring groove dimensions
Ideal For:
This piston set is ideal for automotive enthusiasts, engine builders, and professional shops working on Chrysler, Dodge, Jeep, or Ram 5.7L Hemi engines. It suits applications ranging from street performance upgrades to motorsport and high-output rebuilds where durability and precision are critical. Whether restoring a worn engine or building a high-performance powerplant, these pistons provide a reliable foundation for enhanced combustion and power delivery.
DSS Racing — Founded in 1983 originally as Danny’s Speed Shop, DSS Racing has grown from a small Midwest performance engine shop into a respected name in forged engine components for the high-performance and racing markets. Based in St. Charles, Illinois, DSS is best known for its forged pistons and machined engine parts made in the USA that have been used in championship engines and thousands of builds, blending old-school racing roots with precision manufacturing for enthusiasts and racers alike.
-
-
YEARMAKEMODELSUBMODEL2011 - 2024Chrysler3005.7L Hemi2005 - 2010Chrysler300C5.7L Hemi2009 - 2023DodgeChallenger5.7L Hemi2005 - 2023DodgeCharger5.7L Hemi2005 - 2011DodgeDakota5.7L Hemi2004 - 2025DodgeDurango5.7L Hemi2005 - 2008DodgeMagnum5.7L Hemi2002 - 2010DodgeRam5.7L Hemi2005 - 2010JeepCommander5.7L Hemi2005 - 2025JeepGrand Cherokee5.7L Hemi2022 - 2024JeepWagoneer5.7L Hemi2011 - 2024Ram15005.7L Hemi2019 - 2024Ram1500 Classic5.7L Hemi2010 - 2025Ram25005.7L Hemi2011 - 2012Ram35005.7L Hemi
-
Standard shipping
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
-
Compression Ratio Calculator
Calculate your engine's compression ratio and CID
-
Features Piston Series E SeriesE SX SeriesSX 1-FX Series1-FX 2-FX Series2-FX 3-FX Series3-FX Broached pin oiling slots Drilled, forced wrist pin oiling Forged drain-back windows Drilled bottom ring land intersecting oil groove drain-backs Slightly larger, deeper valve reliefs than OEM CNC machined valve reliefs for moderate performance heads and cam combinations Larger, deeper CNC valve reliefs for more aggressive cylinder head and cam combinations Premium Aircraft spec. 4032 low expansion alloy Premium Aircraft spec. 2618 alloy Blower, Turbo, NOS ready Brushed piston crown Additional CNC milling for weight reduction Patented "X Groove" skirt for superior cylinder and ring life Thinner/shallower ring grooves for max ring seal Low volume contact reduction grooves 2nd ring land accumulator groove prevents flutter 3rd ring land scraper relief Oil ring groove relief reservoir Inner and outer pin boss weight reduction Tighter crown thickness control for lighter parts Dynamic skirt milling for consistent weight Diamond-turned high strength skirts High-strength piston pins Extreme Duty XR wrist pins Horizontal Gas Ports enhance ring seal Forged and machined in the USA
Standard shipping
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Compression Ratio Calculator
Calculate your engine's compression ratio and CID
| Features | Piston Series | ||||
|---|---|---|---|---|---|
| E SeriesE | SX SeriesSX | 1-FX Series1-FX | 2-FX Series2-FX | 3-FX Series3-FX | |
| Broached pin oiling slots | |||||
| Drilled, forced wrist pin oiling | |||||
| Forged drain-back windows | |||||
| Drilled bottom ring land intersecting oil groove drain-backs | |||||
| Slightly larger, deeper valve reliefs than OEM | |||||
| CNC machined valve reliefs for moderate performance heads and cam combinations | |||||
| Larger, deeper CNC valve reliefs for more aggressive cylinder head and cam combinations | |||||
| Premium Aircraft spec. 4032 low expansion alloy | |||||
| Premium Aircraft spec. 2618 alloy | |||||
| Blower, Turbo, NOS ready | |||||
| Brushed piston crown | |||||
| Additional CNC milling for weight reduction | |||||
| Patented "X Groove" skirt for superior cylinder and ring life | |||||
| Thinner/shallower ring grooves for max ring seal | |||||
| Low volume contact reduction grooves | |||||
| 2nd ring land accumulator groove prevents flutter | |||||
| 3rd ring land scraper relief | |||||
| Oil ring groove relief reservoir | |||||
| Inner and outer pin boss weight reduction | |||||
| Tighter crown thickness control for lighter parts | |||||
| Dynamic skirt milling for consistent weight | |||||
| Diamond-turned high strength skirts | |||||
| High-strength piston pins | |||||
| Extreme Duty XR wrist pins | |||||
| Horizontal Gas Ports enhance ring seal | |||||
| Forged and machined in the USA | |||||