Fabtech Trail Gas Shock Suspension System
2020 Jeep Gladiator 3.6L V6
K4176DL
Overview:
The Fabtech 5-inch Trail Gas Shock with Dual-Rate Coil Springs and DLSS Reservoir is a comprehensive suspension upgrade designed specifically for the 2020 Jeep Gladiator 3.6L V6 models. Engineered to enhance off-road capability, this lift kit is ideal for drivers who demand superior performance on aggressive trails, rock crawling, and overland expeditions. It delivers a balanced combination of ride comfort and rugged durability, allowing Gladiator owners to confidently tackle challenging terrain without sacrificing daily drivability.
This system features a complete short arm suspension setup that retains factory lower control arm mounts for straightforward installation. Fabtech’s precision tuning of coil springs and shock valving ensures a compliant ride quality while providing increased suspension travel and improved vehicle stability.
Key Features:
Fabtech’s Trail Gas Shock suspension system offers a range of advanced features designed to optimize off-road performance and durability:
- Dual-rate coil springs that are corner-specific to maintain a level stance and maximize suspension articulation
- Fabtech 5 Ton Joint technology with large polyurethane bushings for long-lasting, quiet operation
- Heavy-duty lower link arms constructed from thick wall steel tubing, guaranteed not to bend under extreme conditions
- Draglink Flip kit and heavy-duty track bar brackets to correct steering geometry and prevent binding during full articulation
- Front and rear bump stop extensions to protect suspension components from over-cycling
- Shock absorbers equipped with remote reservoirs (DLSS) for improved heat dissipation and consistent damping performance
- Designed to accommodate tire sizes up to 40x12.5R20 with appropriate fender modifications
- Maintains factory roll center and axle positioning for predictable handling
Construction & Design:
Fabtech’s suspension components are engineered with durability and performance in mind. The lower control arms are fabricated from thick wall steel tubing, providing exceptional strength and resistance to bending or deformation. Large polyurethane bushings reduce noise and vibration while enhancing longevity compared to traditional rubber mounts.
The dual-rate coil springs feature a progressive design: the initial stage offers a soft, compliant ride for everyday driving and extended suspension travel, while the secondary stage supports vehicle payload and absorbs high-speed impacts. The inclusion of remote reservoir shocks improves fluid cooling and shock response, ensuring consistent damping during prolonged off-road use.
Installation & Fitment:
This Fabtech lift kit is designed for 2020 Jeep Gladiator models equipped with the 3.6L V6 engine. Installation utilizes factory lower control arm mounts, simplifying the process and reducing the need for extensive modifications. Minor trimming or cutting of fender components may be required depending on tire and wheel size, especially when fitting larger 40-inch tires with high clearance fenders.
For heavy off-road use, Fabtech recommends upgrading to heavy-duty driveshafts (front part # FTS94057 and rear part # FTS94068) on 4-door Gladiator models to ensure drivetrain reliability.
What's Included:
- Fabtech dual-rate coil springs, corner-specific for Jeep Gladiator
- Fabtech 5 Ton Joint equipped lower link arms
- Fabtech Trail Gas Shocks with DLSS remote reservoirs
- Draglink Flip kit for steering geometry correction
- Heavy-duty front and rear track bar brackets
- Front and rear bump stop extensions
- All necessary hardware for installation
Ideal For:
This suspension system is perfect for Jeep Gladiator owners who want a reliable, high-performance lift kit that balances daily driving comfort with serious off-road capability. Whether you’re tackling technical rock crawling, aggressive trail riding, or extended overland journeys, Fabtech’s Trail Gas Shock suspension provides the durability, articulation, and ride quality needed to conquer diverse terrain with confidence.
Fabtech is an off-road suspension leader producing lift kits, shocks, and related components to increase ride height, clear larger tires, and improve capability. Their systems are engineered for specific trucks and SUVs, blending on-road drivability with the added travel and strength enthusiasts want for trails, desert runs, and overland builds.
Fabtech 5in Trail Gas Shock w/ Dlss Resi: Jeep Gladiator 2020
- Unit price
- /per
What does the Available to Promise date mean?
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
PART # K4176DL
K4176DL Fabtech Jeep Gladiator 2020 5in Trail Gas Shock w/ Dlss Resi. The Fabtech 5in Trail Gas Shock with DLSS Reservoir enhances suspension performance for off-road adventures, delivering a smooth, compliant ride with improved articulation. Designed specifically for 2020 Jeep Gladiator Launch Edition, Overland, Rubicon, and Sport models, it features dual-rate coil springs and heavy-duty components to handle aggressive trail use and overlanding. This shock system maintains proper steering geometry and supports increased suspension travel for superior control and durability on rugged terrain.
FREE GROUND SHIPPING
MADE IN THE USA
Adding product to your cart
Fabtech Trail Gas Shock Suspension System
2020 Jeep Gladiator 3.6L V6
K4176DL
Overview:
The Fabtech 5-inch Trail Gas Shock with Dual-Rate Coil Springs and DLSS Reservoir is a comprehensive suspension upgrade designed specifically for the 2020 Jeep Gladiator 3.6L V6 models. Engineered to enhance off-road capability, this lift kit is ideal for drivers who demand superior performance on aggressive trails, rock crawling, and overland expeditions. It delivers a balanced combination of ride comfort and rugged durability, allowing Gladiator owners to confidently tackle challenging terrain without sacrificing daily drivability.
This system features a complete short arm suspension setup that retains factory lower control arm mounts for straightforward installation. Fabtech’s precision tuning of coil springs and shock valving ensures a compliant ride quality while providing increased suspension travel and improved vehicle stability.
Key Features:
Fabtech’s Trail Gas Shock suspension system offers a range of advanced features designed to optimize off-road performance and durability:
- Dual-rate coil springs that are corner-specific to maintain a level stance and maximize suspension articulation
- Fabtech 5 Ton Joint technology with large polyurethane bushings for long-lasting, quiet operation
- Heavy-duty lower link arms constructed from thick wall steel tubing, guaranteed not to bend under extreme conditions
- Draglink Flip kit and heavy-duty track bar brackets to correct steering geometry and prevent binding during full articulation
- Front and rear bump stop extensions to protect suspension components from over-cycling
- Shock absorbers equipped with remote reservoirs (DLSS) for improved heat dissipation and consistent damping performance
- Designed to accommodate tire sizes up to 40x12.5R20 with appropriate fender modifications
- Maintains factory roll center and axle positioning for predictable handling
Construction & Design:
Fabtech’s suspension components are engineered with durability and performance in mind. The lower control arms are fabricated from thick wall steel tubing, providing exceptional strength and resistance to bending or deformation. Large polyurethane bushings reduce noise and vibration while enhancing longevity compared to traditional rubber mounts.
The dual-rate coil springs feature a progressive design: the initial stage offers a soft, compliant ride for everyday driving and extended suspension travel, while the secondary stage supports vehicle payload and absorbs high-speed impacts. The inclusion of remote reservoir shocks improves fluid cooling and shock response, ensuring consistent damping during prolonged off-road use.
Installation & Fitment:
This Fabtech lift kit is designed for 2020 Jeep Gladiator models equipped with the 3.6L V6 engine. Installation utilizes factory lower control arm mounts, simplifying the process and reducing the need for extensive modifications. Minor trimming or cutting of fender components may be required depending on tire and wheel size, especially when fitting larger 40-inch tires with high clearance fenders.
For heavy off-road use, Fabtech recommends upgrading to heavy-duty driveshafts (front part # FTS94057 and rear part # FTS94068) on 4-door Gladiator models to ensure drivetrain reliability.
What's Included:
- Fabtech dual-rate coil springs, corner-specific for Jeep Gladiator
- Fabtech 5 Ton Joint equipped lower link arms
- Fabtech Trail Gas Shocks with DLSS remote reservoirs
- Draglink Flip kit for steering geometry correction
- Heavy-duty front and rear track bar brackets
- Front and rear bump stop extensions
- All necessary hardware for installation
Ideal For:
This suspension system is perfect for Jeep Gladiator owners who want a reliable, high-performance lift kit that balances daily driving comfort with serious off-road capability. Whether you’re tackling technical rock crawling, aggressive trail riding, or extended overland journeys, Fabtech’s Trail Gas Shock suspension provides the durability, articulation, and ride quality needed to conquer diverse terrain with confidence.
Fabtech is an off-road suspension leader producing lift kits, shocks, and related components to increase ride height, clear larger tires, and improve capability. Their systems are engineered for specific trucks and SUVs, blending on-road drivability with the added travel and strength enthusiasts want for trails, desert runs, and overland builds.
-
-
YEARMAKEMODELSUBMODEL2020 - 2025JeepGladiator2.0L Turbo2020 - 2025JeepGladiator3.0L EcoDiesel2020 - 2025JeepGladiator3.6L V62020 - 2025JeepGladiatorAll
-
Standard shipping
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Standard shipping
Free Standard Shipping on orders over $250. Select “Free Shipping” at checkout.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.