Fabtech Crawler Coilovers
Jeep Gladiator 20 3.6L V6
K4181DL
Overview:
The Fabtech 3-inch Crawler Coilover Conversion is engineered specifically for the 2020 Jeep Gladiator lineup, including Altitude, Launch Edition, Overland, Rubicon, and Sport models. This advanced coilover system replaces the traditional separate coil spring and shock setup with a fully integrated coilover design, delivering superior off-road suspension damping while maintaining a smooth and controlled highway ride. Ideal for Jeep enthusiasts seeking enhanced wheel travel and improved ride quality, the Fabtech coilovers provide a balanced suspension performance tailored to the unique demands of the Jeep Gladiator.
Designed to bolt directly onto the factory coil spring buckets, this conversion simplifies installation without compromising durability or performance. The system offers 12.50 inches of wheel travel, allowing for greater articulation and control over rough terrain, while the valving is specifically tuned for the Jeep Gladiator to ensure a comfortable yet capable ride both on and off the road.
Key Features:
Fabtech’s Crawler Coilover system incorporates premium components and thoughtful engineering to enhance your Jeep Gladiator’s suspension performance:
- Heavy-duty 1/4" thick steel axle brackets provide clearance for 9" wide wheels with 4.5" backspacing and accommodate tires up to 13.50" wide.
- Dirt Logic 2.5-inch stainless steel coilover shock bodies offer exceptional corrosion resistance and durability in harsh environments.
- Billet aluminum remote reservoirs improve heat dissipation, reducing shock fade for consistent damping performance during extended off-road use.
- Dual-rate American-made coil springs deliver a progressive spring rate for a smooth ride and improved articulation.
- 7/8" OD NitroSteel piston rods provide superior strength compared to standard chrome rods, enhancing shock longevity.
- All external aluminum components are polished and anodized, combining durability with a premium appearance.
- Rebuildable design allows for long-term serviceability and maintenance.
- Optional Dirt Logic 2.25 Hydraulic Bump Stop kit available for enhanced compression damping in extreme off-road conditions.
Construction & Design:
The Fabtech Crawler Coilovers are built with high-quality materials to withstand the rigors of off-road driving. The shock bodies are crafted from stainless steel, providing maximum resistance to corrosion and wear in severe weather and trail conditions. The billet aluminum reservoirs not only add strength but also facilitate superior heat dissipation, helping to maintain consistent shock performance by minimizing heat-related fade.
Precision engineering ensures that all aluminum parts are polished and anodized, delivering a sleek, durable finish that resists oxidation and wear. The coil springs are American-made with a dual-rate design, offering a progressive response that balances comfort and control. The heavy-duty steel brackets are designed to maintain proper alignment and clearance for larger wheels and tires, ensuring compatibility with aggressive off-road setups.
Installation & Fitment:
This coilover conversion system is designed for a straightforward bolt-on installation that retains the factory coil spring buckets on the Jeep Gladiator. No major modifications are required, making it accessible for experienced DIYers or professional installers. The heavy-duty axle brackets provide the necessary clearance for wider wheels and tires, supporting up to 9" wide wheels with 4.5" backspacing and tires up to 13.50" wide.
The system is specifically engineered for the 2020 Jeep Gladiator models including Altitude, Launch Edition, Overland, Rubicon, and Sport trims, ensuring precise fitment and optimal suspension geometry.
What's Included:
- Front Dirt Logic 2.5-inch stainless steel coilover shocks with remote reservoirs
- Dual-rate coil springs
- Heavy-duty 1/4" thick steel axle brackets
- Polished and anodized aluminum components
- Hardware and mounting components for bolt-on installation
Ideal For:
This Fabtech Crawler Coilover system is perfect for Jeep Gladiator owners who demand enhanced off-road capability without sacrificing on-road comfort. Whether tackling technical trails, rock crawling, or seeking improved suspension articulation and damping, this coilover conversion delivers a balanced ride quality and durability. It is especially suited for those running larger wheels and tires who require additional clearance and travel for serious off-road performance.
Fabtech is an off-road suspension leader producing lift kits, shocks, and related components to increase ride height, clear larger tires, and improve capability. Their systems are engineered for specific trucks and SUVs, blending on-road drivability with the added travel and strength enthusiasts want for trails, desert runs, and overland builds.
Fabtech 3in Crawler Coilovers w/ 2.5in Reservoir: Jeep Gladiator 20 3.6L V6
- Unit price
- /per
What does the Available to Promise date mean?
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
Fabtech K4181DL Jeep Gladiator 20 3.6L V6 Fabtech 3in Crawler Coilovers w/ 2.5in Reservoir. Fabtech’s 3-inch Crawler Coilovers with 2.5-inch reservoir deliver superior off-road damping and improved highway ride quality for 2020 Jeep Gladiator models. Designed to bolt onto the factory coil spring bucket, this system offers 12.5 inches of wheel travel and features corrosion-resistant stainless steel bodies with anodized aluminum reservoirs for consistent performance. Ideal for Gladiator Altitude, Launch Edition, Overland, Rubicon, and Sport (2020), it balances rugged durability with refined ride comfort.
FREE GROUND SHIPPING
MADE IN THE USA
Adding product to your cart
Fabtech Crawler Coilovers
Jeep Gladiator 20 3.6L V6
K4181DL
Overview:
The Fabtech 3-inch Crawler Coilover Conversion is engineered specifically for the 2020 Jeep Gladiator lineup, including Altitude, Launch Edition, Overland, Rubicon, and Sport models. This advanced coilover system replaces the traditional separate coil spring and shock setup with a fully integrated coilover design, delivering superior off-road suspension damping while maintaining a smooth and controlled highway ride. Ideal for Jeep enthusiasts seeking enhanced wheel travel and improved ride quality, the Fabtech coilovers provide a balanced suspension performance tailored to the unique demands of the Jeep Gladiator.
Designed to bolt directly onto the factory coil spring buckets, this conversion simplifies installation without compromising durability or performance. The system offers 12.50 inches of wheel travel, allowing for greater articulation and control over rough terrain, while the valving is specifically tuned for the Jeep Gladiator to ensure a comfortable yet capable ride both on and off the road.
Key Features:
Fabtech’s Crawler Coilover system incorporates premium components and thoughtful engineering to enhance your Jeep Gladiator’s suspension performance:
- Heavy-duty 1/4" thick steel axle brackets provide clearance for 9" wide wheels with 4.5" backspacing and accommodate tires up to 13.50" wide.
- Dirt Logic 2.5-inch stainless steel coilover shock bodies offer exceptional corrosion resistance and durability in harsh environments.
- Billet aluminum remote reservoirs improve heat dissipation, reducing shock fade for consistent damping performance during extended off-road use.
- Dual-rate American-made coil springs deliver a progressive spring rate for a smooth ride and improved articulation.
- 7/8" OD NitroSteel piston rods provide superior strength compared to standard chrome rods, enhancing shock longevity.
- All external aluminum components are polished and anodized, combining durability with a premium appearance.
- Rebuildable design allows for long-term serviceability and maintenance.
- Optional Dirt Logic 2.25 Hydraulic Bump Stop kit available for enhanced compression damping in extreme off-road conditions.
Construction & Design:
The Fabtech Crawler Coilovers are built with high-quality materials to withstand the rigors of off-road driving. The shock bodies are crafted from stainless steel, providing maximum resistance to corrosion and wear in severe weather and trail conditions. The billet aluminum reservoirs not only add strength but also facilitate superior heat dissipation, helping to maintain consistent shock performance by minimizing heat-related fade.
Precision engineering ensures that all aluminum parts are polished and anodized, delivering a sleek, durable finish that resists oxidation and wear. The coil springs are American-made with a dual-rate design, offering a progressive response that balances comfort and control. The heavy-duty steel brackets are designed to maintain proper alignment and clearance for larger wheels and tires, ensuring compatibility with aggressive off-road setups.
Installation & Fitment:
This coilover conversion system is designed for a straightforward bolt-on installation that retains the factory coil spring buckets on the Jeep Gladiator. No major modifications are required, making it accessible for experienced DIYers or professional installers. The heavy-duty axle brackets provide the necessary clearance for wider wheels and tires, supporting up to 9" wide wheels with 4.5" backspacing and tires up to 13.50" wide.
The system is specifically engineered for the 2020 Jeep Gladiator models including Altitude, Launch Edition, Overland, Rubicon, and Sport trims, ensuring precise fitment and optimal suspension geometry.
What's Included:
- Front Dirt Logic 2.5-inch stainless steel coilover shocks with remote reservoirs
- Dual-rate coil springs
- Heavy-duty 1/4" thick steel axle brackets
- Polished and anodized aluminum components
- Hardware and mounting components for bolt-on installation
Ideal For:
This Fabtech Crawler Coilover system is perfect for Jeep Gladiator owners who demand enhanced off-road capability without sacrificing on-road comfort. Whether tackling technical trails, rock crawling, or seeking improved suspension articulation and damping, this coilover conversion delivers a balanced ride quality and durability. It is especially suited for those running larger wheels and tires who require additional clearance and travel for serious off-road performance.
Fabtech is an off-road suspension leader producing lift kits, shocks, and related components to increase ride height, clear larger tires, and improve capability. Their systems are engineered for specific trucks and SUVs, blending on-road drivability with the added travel and strength enthusiasts want for trails, desert runs, and overland builds.
-
-
YEARMAKEMODELSUBMODEL2020JeepGladiator3.6L V6
-
Standard shipping
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Standard shipping
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Free Easy Returns
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.