Part #: FPE-34771
The Fleece Performance stainless steel exhaust manifold stud kit is engineered specifically for Dodge Ram trucks equipped with Cummins 5.9L and 6.7L diesel engines from 1994 through 2018. Designed to replace factory studs, this kit ensures a secure, rust-free connection between the exhaust manifold and cylinder head, improving durability and simplifying installation. Ideal for enthusiasts and professionals upgrading or maintaining their exhaust systems, these studs provide enhanced clamping force and corrosion resistance for long-lasting performance.
Whether you are installing an aftermarket exhaust manifold or replacing worn factory hardware, this stud kit offers a reliable solution tailored to Cummins diesel engines. Its robust design helps maintain a tight seal under extreme conditions, reducing the risk of exhaust leaks and improving overall engine efficiency.
Fleece Performance’s exhaust manifold stud kit combines quality materials and thoughtful engineering to deliver superior performance and ease of use. Key features include:
The studs are crafted from premium aged 603 stainless steel, a material known for its excellent mechanical properties and resistance to oxidation and corrosion. This ensures that the studs maintain their integrity and appearance even under the high temperatures and corrosive gases typical of diesel exhaust systems. The 7mm hex head design is engineered for durability and ease of use, allowing technicians to apply consistent torque without rounding off the fastener.
The inclusion of 12-point nuts and washers further enhances the assembly’s reliability by providing a secure, vibration-resistant fastening solution. This attention to detail in construction and design makes the kit a dependable upgrade over factory hardware.
Installation is straightforward for anyone familiar with exhaust manifold replacement or upgrade procedures. The studs fit directly into the cylinder head and are compatible with aftermarket exhaust manifolds for Cummins engines. Note that for 5.9L 24V engines from 2003 to 2007, removal of the factory heat shield is required to accommodate the studs.
This kit fits the following vehicles:
This stud kit is ideal for diesel truck owners, mechanics, and performance enthusiasts who demand reliable, corrosion-resistant hardware for exhaust manifold installation or replacement. It is especially suited for those upgrading to aftermarket manifolds or performing maintenance on Cummins-powered Dodge Ram trucks spanning model years 1994 through 2018.
Fleece Performance Engineering is a diesel performance manufacturer known for innovative upgrades and reliability-focused solutions for Cummins, Duramax, and Power Stroke platforms. From turbo and fuel system components to cooling and electrical repair solutions, Fleece parts are built for owners who demand stronger performance without compromising dependability.
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
FPE-34771 Fleece Performance 94-18 Dodge Ram 5.9L/6.7L Diesel Exhaust Manifold Stud Kit. Upgrade your Cummins exhaust manifold installation with these stainless steel studs made from aged 603 stainless steel for superior rust and corrosion resistance. Featuring a 7mm hex head, they allow for higher clamping force and easier installation. The kit includes 12-point nuts and washers, ensuring a secure fit and enhanced durability. Ideal for 5.9L and 6.7L diesel engines from 1994 to 2018, these studs improve reliability and performance under high torque conditions.
FLAT RATE SHIPPING
MADE IN THE USA
Adding product to your cart
Part #: FPE-34771
The Fleece Performance stainless steel exhaust manifold stud kit is engineered specifically for Dodge Ram trucks equipped with Cummins 5.9L and 6.7L diesel engines from 1994 through 2018. Designed to replace factory studs, this kit ensures a secure, rust-free connection between the exhaust manifold and cylinder head, improving durability and simplifying installation. Ideal for enthusiasts and professionals upgrading or maintaining their exhaust systems, these studs provide enhanced clamping force and corrosion resistance for long-lasting performance.
Whether you are installing an aftermarket exhaust manifold or replacing worn factory hardware, this stud kit offers a reliable solution tailored to Cummins diesel engines. Its robust design helps maintain a tight seal under extreme conditions, reducing the risk of exhaust leaks and improving overall engine efficiency.
Fleece Performance’s exhaust manifold stud kit combines quality materials and thoughtful engineering to deliver superior performance and ease of use. Key features include:
The studs are crafted from premium aged 603 stainless steel, a material known for its excellent mechanical properties and resistance to oxidation and corrosion. This ensures that the studs maintain their integrity and appearance even under the high temperatures and corrosive gases typical of diesel exhaust systems. The 7mm hex head design is engineered for durability and ease of use, allowing technicians to apply consistent torque without rounding off the fastener.
The inclusion of 12-point nuts and washers further enhances the assembly’s reliability by providing a secure, vibration-resistant fastening solution. This attention to detail in construction and design makes the kit a dependable upgrade over factory hardware.
Installation is straightforward for anyone familiar with exhaust manifold replacement or upgrade procedures. The studs fit directly into the cylinder head and are compatible with aftermarket exhaust manifolds for Cummins engines. Note that for 5.9L 24V engines from 2003 to 2007, removal of the factory heat shield is required to accommodate the studs.
This kit fits the following vehicles:
This stud kit is ideal for diesel truck owners, mechanics, and performance enthusiasts who demand reliable, corrosion-resistant hardware for exhaust manifold installation or replacement. It is especially suited for those upgrading to aftermarket manifolds or performing maintenance on Cummins-powered Dodge Ram trucks spanning model years 1994 through 2018.
Fleece Performance Engineering is a diesel performance manufacturer known for innovative upgrades and reliability-focused solutions for Cummins, Duramax, and Power Stroke platforms. From turbo and fuel system components to cooling and electrical repair solutions, Fleece parts are built for owners who demand stronger performance without compromising dependability.
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
