Part #: PK D30-JK
The Yukon Gear & Axle Pinion Install Kit for Dana 30 Reverse Differential is designed specifically for Jeep Wrangler JK models from 2007 to 2017 equipped with 3.6L or 3.8L V6 engines. This kit provides a comprehensive solution for installing pinion gears on lower mileage vehicles where the carrier bearings and races remain in good condition and can be reused. Yukon’s meticulous research ensures that each kit includes all the necessary components to facilitate a smooth and precise gear installation, helping maintain optimal drivetrain performance.
Ideal for enthusiasts and professional mechanics alike, this kit offers a reliable and cost-effective way to service your Dana 30 differential without the need for complete bearing replacement, saving time and money while preserving factory tolerances.
This pinion install kit is engineered to deliver quality and ease of installation. Key features include:
The Yukon Pinion Install Kit features Timken bearings and races known for their high load capacity and long service life. The seals are crafted from durable materials that resist wear and environmental damage, ensuring a tight seal against dirt and moisture. Each component is precision-engineered to fit perfectly within the Dana 30 reverse differential housing, maintaining the integrity of your drivetrain’s gear geometry and alignment. Yukon’s dedication to quality control and application-specific research guarantees that every part in the kit meets stringent standards for performance and reliability.
Installation of this pinion install kit is straightforward for those familiar with differential service procedures. It is designed for use on 2007–2011 Jeep Wrangler models with the 3.8L V6 engine and 2012–2017 models with the 3.6L V6 engine, ensuring precise fitment. The kit is ideal when the carrier bearings and races are still in good condition and can be reused, simplifying the installation process and reducing overall service time. Proper installation will restore correct pinion bearing preload and gear mesh, which are critical for smooth and quiet operation.
This install kit is perfect for Jeep Wrangler JK owners and mechanics performing differential maintenance or upgrades on vehicles with lower mileage where carrier bearings and races remain reusable. It is especially suited for those looking to maintain factory-level performance and reliability without the expense of replacing the entire bearing set. Whether you are restoring your Jeep’s drivetrain or performing routine service, this kit provides all the essential components for a professional-quality pinion gear installation.
Yukon Gear & Axle supplies hardcore drivetrain components—ring & pinion gears, axles, lockers, and differential upgrades—built for off-road and high-load performance. Trusted by enthusiasts and installers, Yukon focuses on fit, strength, and proven options for re-gearing and reinforcing trucks and 4x4s running bigger tires and tougher terrain.
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
PK D30-JK Yukon Gear & Axle 07-17 Jeep Wrangler Pinion Install Kit Dana 30 Reverse Diff. Yukon Pinion Installation Kits provide a reliable solution for gear installation on lower mileage vehicles, allowing reuse of carrier bearings and races. Featuring premium Timken bearings, races, high-quality seals, and essential small parts, this kit ensures a precise fit. Extensive research guarantees all necessary components arrive ready for a smooth gear set installation, enhancing durability and performance in your Jeep Wrangler.
FLAT RATE SHIPPING
Adding product to your cart
Part #: PK D30-JK
The Yukon Gear & Axle Pinion Install Kit for Dana 30 Reverse Differential is designed specifically for Jeep Wrangler JK models from 2007 to 2017 equipped with 3.6L or 3.8L V6 engines. This kit provides a comprehensive solution for installing pinion gears on lower mileage vehicles where the carrier bearings and races remain in good condition and can be reused. Yukon’s meticulous research ensures that each kit includes all the necessary components to facilitate a smooth and precise gear installation, helping maintain optimal drivetrain performance.
Ideal for enthusiasts and professional mechanics alike, this kit offers a reliable and cost-effective way to service your Dana 30 differential without the need for complete bearing replacement, saving time and money while preserving factory tolerances.
This pinion install kit is engineered to deliver quality and ease of installation. Key features include:
The Yukon Pinion Install Kit features Timken bearings and races known for their high load capacity and long service life. The seals are crafted from durable materials that resist wear and environmental damage, ensuring a tight seal against dirt and moisture. Each component is precision-engineered to fit perfectly within the Dana 30 reverse differential housing, maintaining the integrity of your drivetrain’s gear geometry and alignment. Yukon’s dedication to quality control and application-specific research guarantees that every part in the kit meets stringent standards for performance and reliability.
Installation of this pinion install kit is straightforward for those familiar with differential service procedures. It is designed for use on 2007–2011 Jeep Wrangler models with the 3.8L V6 engine and 2012–2017 models with the 3.6L V6 engine, ensuring precise fitment. The kit is ideal when the carrier bearings and races are still in good condition and can be reused, simplifying the installation process and reducing overall service time. Proper installation will restore correct pinion bearing preload and gear mesh, which are critical for smooth and quiet operation.
This install kit is perfect for Jeep Wrangler JK owners and mechanics performing differential maintenance or upgrades on vehicles with lower mileage where carrier bearings and races remain reusable. It is especially suited for those looking to maintain factory-level performance and reliability without the expense of replacing the entire bearing set. Whether you are restoring your Jeep’s drivetrain or performing routine service, this kit provides all the essential components for a professional-quality pinion gear installation.
Yukon Gear & Axle supplies hardcore drivetrain components—ring & pinion gears, axles, lockers, and differential upgrades—built for off-road and high-load performance. Trusted by enthusiasts and installers, Yukon focuses on fit, strength, and proven options for re-gearing and reinforcing trucks and 4x4s running bigger tires and tougher terrain.
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
