Part #: PK D44-JK-REV-RUB
The Yukon Pinion Installation Kit for Dana 44 front axles is engineered specifically for Jeep Wrangler JK models from 2007 to 2017 equipped with 3.6L or 3.8L V6 engines. Designed for lower mileage vehicles where the carrier bearings and races remain in good condition, this kit provides a cost-effective and reliable solution for installing new gear sets without the need to replace every component.
Yukon Gear & Axle has meticulously developed this kit to include all the essential parts required for a smooth and precise pinion gear installation. Whether you are performing a gear ratio upgrade or replacing worn components, this kit ensures you have the correct bearings, races, seals, and hardware to complete the job efficiently.
This pinion install kit combines quality materials and precise engineering to support your Dana 44 axle rebuild or upgrade:
The Yukon Pinion Install Kit features Timken bearings and races, known for their high load capacity and long service life. These components are precision-engineered to meet or exceed OEM specifications, ensuring a perfect fit and reliable performance. The seals included in the kit are crafted from durable materials that resist wear, heat, and chemical exposure, helping to maintain axle integrity over time.
Every small part and fastener is selected to complement the Dana 44 axle design, providing a seamless installation experience. Yukon’s extensive research and testing for this application guarantee that the kit components work harmoniously to maintain proper gear mesh and bearing preload, which are critical for axle longevity and quiet operation.
This kit is intended for use on 2007–2011 Jeep Wrangler models with the 3.8L V6 engine and 2012–2017 models with the 3.6L V6 engine, specifically for the front Dana 44 axle. It is ideal for vehicles with lower mileage where the existing carrier bearings and races are still reusable, allowing you to replace only the pinion bearings, races, seals, and related hardware.
Installation requires standard axle disassembly and pinion removal procedures. The included components simplify the process by providing all necessary parts in one package, reducing the need for additional purchases. Proper installation ensures correct gear alignment and preload, which are essential for optimal axle performance and durability.
This Yukon Pinion Install Kit is perfect for Jeep Wrangler JK owners performing a front Dana 44 axle gear installation or rebuild on vehicles with 3.6L or 3.8L V6 engines. It is especially suited for enthusiasts and mechanics working on lower mileage vehicles where carrier bearings and races remain in good condition, enabling a cost-effective and efficient gear set installation.
Yukon Gear & Axle supplies hardcore drivetrain components—ring & pinion gears, axles, lockers, and differential upgrades—built for off-road and high-load performance. Trusted by enthusiasts and installers, Yukon focuses on fit, strength, and proven options for re-gearing and reinforcing trucks and 4x4s running bigger tires and tougher terrain.
ETA stands for Estimated Time of Arrival. The date shown is calculated using our Available-to-Promise (ATP) system, which tracks real-time supplier commitments to determine when a product is expected to be available for delivery. Specifically, the date is calculated by adding 9 business days from the date a supplier has committed to ship the product, representing a worst-case scenario for when we can expect to receive inventory.
Please note: The ETA is an estimate, not a guarantee. While we work closely with our suppliers to keep dates as accurate as possible, delays due to shipping carriers, weather, customs, or supplier-side issues may occasionally push the actual arrival beyond the date shown. Likewise, inventory may arrive sooner than the ETA in many cases. If you would like to be notified for when this item arrives, sign up for our back in stock notifications!
PK D44-JK-REV-RUB Yukon Gear & Axle 07-17 Jeep Wrangler Pinion Install Kit Dana 44 (FRONT). Yukon Pinion Installation Kits provide a reliable solution for gear installation on lower mileage vehicles, allowing reuse of carrier bearings and races. Featuring premium Timken bearings, races, high-quality seals, and essential small parts, this kit ensures a precise fit. Extensive research guarantees all necessary components are included, making gear set installation straightforward and efficient for your Jeep Wrangler 3.6L/3.8L.
FLAT RATE SHIPPING
Adding product to your cart
Part #: PK D44-JK-REV-RUB
The Yukon Pinion Installation Kit for Dana 44 front axles is engineered specifically for Jeep Wrangler JK models from 2007 to 2017 equipped with 3.6L or 3.8L V6 engines. Designed for lower mileage vehicles where the carrier bearings and races remain in good condition, this kit provides a cost-effective and reliable solution for installing new gear sets without the need to replace every component.
Yukon Gear & Axle has meticulously developed this kit to include all the essential parts required for a smooth and precise pinion gear installation. Whether you are performing a gear ratio upgrade or replacing worn components, this kit ensures you have the correct bearings, races, seals, and hardware to complete the job efficiently.
This pinion install kit combines quality materials and precise engineering to support your Dana 44 axle rebuild or upgrade:
The Yukon Pinion Install Kit features Timken bearings and races, known for their high load capacity and long service life. These components are precision-engineered to meet or exceed OEM specifications, ensuring a perfect fit and reliable performance. The seals included in the kit are crafted from durable materials that resist wear, heat, and chemical exposure, helping to maintain axle integrity over time.
Every small part and fastener is selected to complement the Dana 44 axle design, providing a seamless installation experience. Yukon’s extensive research and testing for this application guarantee that the kit components work harmoniously to maintain proper gear mesh and bearing preload, which are critical for axle longevity and quiet operation.
This kit is intended for use on 2007–2011 Jeep Wrangler models with the 3.8L V6 engine and 2012–2017 models with the 3.6L V6 engine, specifically for the front Dana 44 axle. It is ideal for vehicles with lower mileage where the existing carrier bearings and races are still reusable, allowing you to replace only the pinion bearings, races, seals, and related hardware.
Installation requires standard axle disassembly and pinion removal procedures. The included components simplify the process by providing all necessary parts in one package, reducing the need for additional purchases. Proper installation ensures correct gear alignment and preload, which are essential for optimal axle performance and durability.
This Yukon Pinion Install Kit is perfect for Jeep Wrangler JK owners performing a front Dana 44 axle gear installation or rebuild on vehicles with 3.6L or 3.8L V6 engines. It is especially suited for enthusiasts and mechanics working on lower mileage vehicles where carrier bearings and races remain in good condition, enabling a cost-effective and efficient gear set installation.
Yukon Gear & Axle supplies hardcore drivetrain components—ring & pinion gears, axles, lockers, and differential upgrades—built for off-road and high-load performance. Trusted by enthusiasts and installers, Yukon focuses on fit, strength, and proven options for re-gearing and reinforcing trucks and 4x4s running bigger tires and tougher terrain.
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
Free Standard Shipping on orders over $300. Select “Free Shipping” at checkout. *Exclusions apply on oversized and freight items.
Need to return an item? We make it easy. Email us and we'll send you a free return label with instructions on how to return.
