Lowering Springs Guide
Best Lowering Springs for the
2015 – 2023 Dodge Charger: Every Kit Compared
A complete comparison of every lowering spring kit available for the 2015-2023 Dodge Charger — covering the 3.6L Pentastar V6, 5.7L R/T, 6.4L Scat Pack & SRT 392, 6.2L Hellcat, and Widebody models. Drop heights, pricing, fitment notes, and real-world owner feedback.
At a Glance
Quick Comparison
| Brand / Kit | Front Drop | Rear Drop | Fits | Type | Price | |
|---|---|---|---|---|---|---|
| D2 Racing Pro Series | -1.8" | -2.0" | V6, R/T only | Progressive | $200 | SHOP → |
| BMR Suspension (F&R Set) | -1.25" | -1.25" | R/T, Scat Pack, Hellcat | Linear | $300 | SHOP → |
| H&R Sport | -1.7" | -1.4" | R/T, SRT, Hellcat | Progressive | $316 | SHOP → |
| Eibach Pro-Kit (V6 / R/T) | -1.5" | -1.2" | V6, R/T | Progressive | $395 | SHOP → |
| Eibach Pro-Kit (Scat Pack / Hellcat) | -0.7" to -1.1" | -0.9" to -1.4" | Scat Pack, SRT, Hellcat, Widebody | Progressive | $395 | SHOP → |
| Function & Form (Adjustable) | -1.0" to -2.0" | -1.0" to -2.0" | All RWD | Sleeve System | $550 | SHOP → |
| Hurst Stage 1 | -1.0" to -1.25" | -1.0" to -1.25" | All trims incl. Widebody | Linear | $615 | SHOP → |
Important
What to Know Before You Buy
Your Trim Changes the Drop
The same spring kit will drop a V6 Charger differently than an R/T or Hellcat. Heavier engines compress springs more. The Eibach E10-27-008-02-22, for example, drops a Scat Pack -0.7" front but a Hellcat Widebody -1.1" front. We break down every trim's expected drop in each product section below.
Scat Pack, SRT & Hellcat Fitment
Performance trims use Bilstein shocks with electronic adaptive damping (EDC). Most standard lowering kits work with these models, but only the Eibach E10-27-008-02-22 is specifically designed and validated for Scat Pack, SRT 392, Hellcat, and Widebody. The Function & Form sleeve kit preserves OEM electronic damping on all RWD Chargers.
Alignment & Camber Correction
Drops under 1.25" usually stay within factory alignment specs. Anything above 1.25" will likely need aftermarket adjustable upper control arms or camber bolts ($300–$600 extra). Always budget for a professional alignment after installation.
Factory Shocks Still Matter
All kits on this page work with factory shocks. However, if your shocks have 60,000+ miles, they may be worn. Installing new springs on tired dampers results in a bouncy, poorly controlled ride. Consider upgrading to Bilstein B6 dampers ($100–$150 each) if your shocks are worn.
D2 Racing Pro Series Lowering Springs
At $200, the D2 Racing Pro Series is the cheapest lowering spring option available for the Charger — and one of the most aggressive for V6 and R/T trims, with a 1.8" front and 2.0" rear drop. If maximum slam on a budget is your goal and you drive a base V6 or R/T, this is the kit. But there's a catch: D2 explicitly excludes SRT, Scat Pack, AWD, and Hellcat models. At -1.8" to -2.0", you'll almost certainly need aftermarket adjustable upper control arms for camber correction ($300–$600), will likely scrape on driveways and speed bumps, and the true "all-in" cost approaches $500–$800.
Forum reports from long-term owners note that D2 springs can sag over time (5–7 years), gradually settling lower than the advertised drop. The 1-year warranty is the shortest of any product in this guide. For V6 and R/T owners who want the most aggressive stance at the lowest price and accept these trade-offs, D2 delivers.
Pros
- Lowest price at $200
- Aggressive drop (-1.8" F / -2.0" R) for V6/R/T
- Eliminates nearly all wheel gap for maximum stance
Cons
- Excludes SRT, Scat Pack, Hellcat, AWD
- Camber correction almost certainly required (budget extra $300–$600)
- Reports of sagging after 5–7 years
- Only 1-year warranty
- Will scrape on driveways, speed bumps, steep inclines
- Significantly stiffer ride quality
BMR Suspension Lowering Springs
BMR is the only brand in this comparison that sells front and rear springs individually — making them ideal for owners who just want to fix the Charger's nose-high "stink bug" look without touching the rear. At $140 for front springs only, it's the cheapest way to improve your Charger's stance. The full front-and-rear set (SP110R) is $300, making it one of the best values on this list.
Every BMR spring is made in the USA, individually tested, and compressed solid twice before shipping to prevent settling. They publish their spring rates (280 lb/in front, 720 lb/in rear) and offer a lifetime sag warranty — if the springs sag, they replace them free. The conservative 1.25" drop means you almost certainly won't need camber correction hardware. BMR fits all V8 Chargers: R/T, SRT 392, Scat Pack, and Hellcat.
Available Configurations
| SKU | Configuration | Drop | Price |
|---|---|---|---|
| SP111R | Front Only (pair) | -1.25" front | $140 |
| SP112R | Rear Only (pair) | -1.25" rear | $180 |
| SP110R | Full Set (F&R) | -1.25" F&R | $300 |
Pros
- Buy front-only to level the stance ($140)
- Published spring rates (280 lb/in F, 720 lb/in R)
- Made in USA, individually tested
- Lifetime sag warranty
- Conservative drop — no camber correction needed
- Works great with factory Scat Pack Bilstein shocks
- Fits R/T through Hellcat
Cons
- Only -1.25" drop — not enough for aggressive stance builds
- Not marketed for V6 models (designed for heavier V8 weight)
- Less community presence than Eibach or H&R
H&R Sport Lowering Springs
H&R is the second most popular lowering spring brand in the Charger community, and for good reason. Their Sport Springs (50888-1) deliver a noticeably more aggressive drop than Eibach's Pro-Kit — approximately 1.7" in the front and 1.4" in the rear — which dramatically closes the wheel gap and gives the Charger a much more planted, aggressive look. They're made in Germany with a lifetime limited warranty, and the progressive spring rate keeps the ride livable for daily driving despite the significant drop.
H&R's 50888-1 fits all V8 Chargers: R/T 5.7L, SRT8 6.1L/6.4L, SRT 392, and Hellcat 6.2L. One important note: H&R has not officially validated fitment on Widebody variants. The wider 305-series tires and altered suspension geometry increase rubbing risk. If you own a Widebody Charger, contact H&R directly or consider the Eibach or Hurst kit instead.
Pros
- More aggressive drop than Eibach Pro-Kit
- Lifetime limited warranty
- Made in Germany, proven quality
- Strong community presence
- Covers R/T through Hellcat (narrowbody)
Cons
- Not validated for Widebody models
- At -1.7" front drop, camber correction will likely be needed
- Ride is noticeably firmer than stock (stiffer than Eibach Pro-Kit)
- May require upgraded shocks for optimal ride at this drop height
Eibach Pro-Kit Lowering Springs
The Eibach Pro-Kit is the most recommended lowering spring for the Charger across every major forum — LX Forums, Charger forums, and Reddit. Eibach is the only brand that offers trim-specific kits for this platform, meaning the spring rates are precisely tuned for the weight and suspension geometry of your exact sub-model. They deliver a noticeable drop with near-stock ride quality, and the progressive spring rate keeps daily driving comfortable while improving handling in corners.
For 2015-2023 Chargers, Eibach offers two main kits: one for V6 and R/T models (28102.140-1), and another specifically engineered for Scat Pack, SRT 392, Hellcat, and Widebody models (E10-27-008-02-22). The Scat Pack/Hellcat kit is the only lowering spring on the market validated for Widebody variants and designed to work with the factory Bilstein electronic adaptive damping system.
Drop by Trim — Eibach E10-27-008-02-22 (Scat Pack / Hellcat)
| Sub-Model | Front Drop | Rear Drop |
|---|---|---|
| Scat Pack | -0.7" | -0.9" |
| SRT Hellcat | -0.7" | -0.9" |
| SRT Hellcat Widebody | -1.1" | -1.4" |
| SRT Hellcat Redeye Widebody | -1.1" | -1.4" |
| Scat Pack Widebody | -1.1" | -1.4" |
Drop by Trim — Eibach 28102.140-1 (V6 / R/T)
| Sub-Model | Front Drop | Rear Drop |
|---|---|---|
| 3.6L V6 RWD | -1.5" | -1.2" |
| R/T 5.7L RWD | -1.5" | -1.2" |
Pros
- Only brand with validated Widebody fitment
- Works with factory electronic adaptive damping
- Trim-specific spring rates for precise drop
- Near-stock ride comfort (progressive rate)
- Million-mile limited lifetime warranty
- Made in Germany
- Camber correction usually not needed (under 1.25" drop on most trims)
Cons
- Conservative drop on Scat Pack/Hellcat — may not satisfy aggressive stance seekers
- Multiple SKUs can be confusing (make sure you pick the right one for your trim)
- Spring rates not publicly published
Function & Form Adjustable Spring Sleeve Kit
The Function & Form is a unique product in this lineup — it's not a traditional lowering spring, and it's not a full coilover. It's an adjustable sleeve system that wraps around your factory shocks, replacing the spring with a height-adjustable unit. You keep your OEM Bilstein electronic dampers (all drive modes still work), but gain the ability to dial in your exact ride height from -1.0" to -2.0". Think of it as a middle ground between springs and coilovers.
Unlike the Challenger-specific kit, this Charger/300 version fits all RWD Chargers — V6, R/T, Scat Pack, and Hellcat. It's compatible with the OEM electronic damping system, so Sport and Track modes continue to function. The trade-off for adjustability at this price point is a shorter 1-year warranty and budget-tier materials compared to premium ST/KW options. Function & Form has its roots in the Honda/import community, and Charger-specific reviews are limited.
Pros
- Adjustable height (-1.0" to -2.0")
- Preserves factory electronic damping (all modes work)
- Cheaper than coilovers or ST Suspensions
- Mild 10–15% spring rate increase keeps ride comfortable
- Fits all RWD Charger trims
Cons
- Only 1-year warranty
- No damping adjustment (relies entirely on OEM shocks)
- Limited Charger community reviews
- Threaded sleeves require periodic maintenance to prevent seizing
- Spring rates not published
Hurst Stage 1 Performance Spring Kit
The Hurst Stage 1 is the handling-focused choice. Unlike every other spring on this list, Hurst uses a linear spring rate rather than progressive. Linear springs provide a consistent, predictable response throughout the entire suspension travel — better for spirited driving and track days, but firmer for daily commuting. This is the spring for the owner who prioritizes cornering grip and turn-in response over ride comfort.
Backed by Holley Performance Products, Hurst is a legacy American muscle car brand founded in 1958. The springs feature a signature hammered gold and black powder coat for corrosion resistance and distinctive appearance. The drop is trim-dependent: approximately -1.0" to -1.25" across all Charger trims including SXT, GT, R/T, Scat Pack, SRT 392, Hellcat, and Widebody. Hurst is the only kit in this guide with validated Widebody fitment besides Eibach, and it covers the broadest trim range.
Pros
- Linear rate for predictable, performance handling
- Lifetime limited warranty (Holley-backed)
- Trim-dependent drop (smart engineering)
- Fits all trims including Widebody
- Signature hammered gold and black powder coat finish
- Broadest trim coverage in this guide
Cons
- Most expensive non-adjustable spring at $615
- Linear rate = noticeably firmer daily ride than progressive springs
- At this price, entry-level coilovers become a consideration
- Moderate drop (-1.0" to -1.25") — not for aggressive stance builds
Fitment Reference
Which Kits Fit Your Trim?
| Trim | D2 | BMR | H&R | Eibach | F&F | Hurst |
|---|---|---|---|---|---|---|
| SXT / GT (V6) | ✓ | — | ✗ | ✓ | ✓ | ✓ |
| R/T (5.7L) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Scat Pack (6.4L) | ✗ | ✓ | ✓ | ✓ | ✓ | ✓ |
| SRT 392 | ✗ | ✓ | ✓ | ✓ | ✓ | ✓ |
| SRT Hellcat | ✗ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Widebody (any) | ✗ | ✓ | ✗ | ✓ | ✓ | ✓ |
✓ = Confirmed fitment • ✗ = Explicitly excluded • — = Not tested/marketed for this trim
Common Questions
Frequently Asked Questions
Do I need new shocks when installing lowering springs?
Not necessarily. All kits on this page are designed to work with your factory shocks. However, if your shocks have 60,000+ miles, they're likely worn. Installing fresh springs on tired dampers creates a bouncy, poorly controlled ride. Upgrading to Bilstein B6 performance shocks ($100–$150 each) is recommended if your dampers are worn.
Will lowering springs void my factory warranty?
Under the Magnuson-Moss Warranty Act, a dealer cannot void your entire warranty just because you installed aftermarket parts. However, if a warranty claim is directly related to the modification (e.g., premature strut wear caused by lowering), the dealer can deny that specific claim. Lowering springs typically don't trigger warranty issues unless they cause a related failure.
Do lowering springs affect ride quality?
Yes, but the degree varies dramatically by product. Conservative drops (0.5–1.25") with progressive-rate springs (like Eibach Pro-Kit or BMR) maintain near-stock ride comfort. Aggressive drops (1.7–2.0") with stiffer spring rates will be noticeably firmer, especially over bumps and rough roads. Linear-rate springs (Hurst) feel firmer across the board but provide more predictable handling.
What's the difference between progressive and linear spring rates?
Progressive springs have a variable rate — soft initially for comfort over small bumps, then stiffening progressively as the spring compresses further. This gives a comfortable daily ride with good control under hard cornering. Most springs on this page are progressive. Linear springs (like Hurst) have a constant rate throughout the entire range of travel. They feel firmer overall but deliver more consistent, predictable handling. Linear is preferred for track-oriented setups.
Should I get lowering springs or coilovers?
Lowering springs are best if you want a set drop at the lowest cost ($200–$600 for springs vs. $1,200+ for quality coilovers). If you want adjustable ride height AND adjustable damping, coilovers are the better choice. The labor cost is roughly the same for both. Check our Suspension Buyers Guide for a full coilover comparison.
I have a Widebody Charger. What are my options?
Your best validated options are the Eibach Pro-Kit E10-27-008-02-22 and the Hurst Stage 1. Eibach is the only brand with trim-specific Widebody spring rates and factory damper validation. Hurst offers the broadest trim coverage including Widebody. The Function & Form adjustable sleeve kit also fits Widebody and preserves electronic damping. H&R has not officially validated Widebody fitment.
Ready to Lower Your Charger?
Browse all of our lowering springs for the Dodge Charger, or contact us if you need help choosing the right kit for your specific trim and goals.
