Stage 1 Bundle
One-Click Horsepower: Curated Stage 1
Bundles for the Dodge Magnum
Hand-picked by FastHemis for every Magnum engine — 2005–2008 5.7L Hemi and 6.1L SRT8. Each bundle pairs an aFe MagnumFORCE Stage-2 cold air intake, Ripp HEMI high-performance coil packs, and E3 spark plugs for bolt-on gains of +40 HP — no tune required.
Important
What to Know Before You Buy
What Is a Stage 1 Bundle?
A Stage 1 bundle combines a cold air intake, high-performance ignition coils, and upgraded spark plugs into one curated package. These three components work together to improve airflow, spark energy, and combustion efficiency — delivering noticeable gains without a tune or ECU modifications. 100% bolt-on, safe for stock PCM.
Why Buy the Bundle?
Each bundle is hand-picked by FastHemis specialists for your exact engine and generation. Components are confirmed compatible, tested together, and priced better than buying individually. One click, one shipment, one install — no sourcing, no guesswork.
Installation
DIY-friendly with basic hand tools. Intake swap takes ~1–2 hours, coils and plugs ~1–2 hours. No lift needed, no wiring, no tuning. E3 plugs come pre-gapped. Follow torque specs for coil bolts. Total install: under 3 hours for all three components.
Warranty & Emissions
aFe intakes are 50-state legal. Ripp V6 coil packs carry CARB certification (EO: D-705-2). E3 plugs and Ripp coils are emissions-neutral. Bolt-ons do not void your factory warranty under the Magnuson-Moss Warranty Act unless they cause a related failure.
One-Click Stage 1 Kit: 2005–2008 Magnum 5.7L Hemi
aFe MagnumFORCE Stage-2 Intake System
Filter: Pro 5R (5-layer cotton gauze)
Housing: Sealed XLPE, heat-resistant
Design: CAD-designed, dyno-tuned tube
- Optimized airflow for the 5.7L HEMI platform
- Sealed housing reduces intake air temperature
- Washable, reusable Pro 5R filter media
- Clear sight window for filter inspection
- Factory mounting locations for clean install
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +20 HP on 5.7L HEMI
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +20 HP from increased spark energy on 5.7L
- Heavy-duty copper core primary winding
- Increased secondary core windings for higher mJ output
- Compatible with naturally aspirated and forced induction
- High-density polymer housing with epoxy-filled internals
E3 Spark Plugs (E3.66)
Part: E3.66
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Three-leg ground electrode maximizes heat transfer
- Stronger, more complete combustion per cycle
- Improved throttle response and fuel economy
- Nickel-plated shell resists corrosion
The Scoop
Why this bundle? The Magnum R/T’s 5.7L HEMI responds exceptionally well to breathing and ignition upgrades. The aFe MagnumFORCE Stage-2 intake feeds cooler, denser air to the HEMI while the Ripp HEMI coil packs deliver up to +20 HP alone by accelerating cylinder flame speed. The E3 DiamondFIRE plugs complete the combustion chain for a combined +40 HP that’s felt immediately on throttle.
What’s included? aFe MagnumFORCE Stage-2 Intake System with Pro 5R filter, Ripp HEMI High Performance Coil Packs (8-pack, MV8-CPK), and E3 Spark Plugs (E3.66, 16 included). All confirmed for the 2005–2008 Dodge Magnum 5.7L HEMI.
How hard is the install? Fully bolt-on. The intake uses factory mounting points and the coils are direct replacements — no wiring modifications. Budget ~2–3 hours total with basic hand tools. No tune, no lift, no shop time required.
The FastHemis One-Click Stage 1 Kit for the 2005–2008 Dodge Magnum 5.7L Hemi pairs an aFe MagnumFORCE Stage-2 cold air intake with Ripp HEMI coil packs and E3 DiamondFIRE plugs. The intake system replaces the factory airbox with a sealed, heat-resistant housing and high-flow Pro 5R filter — delivering cooler, denser air for improved volumetric efficiency. The Ripp coil packs use heavy-duty copper core windings and increased secondary turns to boost spark energy significantly over stock, resulting in faster combustion and stronger power delivery throughout the RPM range.
The E3 plugs stabilize and strengthen ignition with their unique three-leg electrode design, supporting smoother power delivery and improved throttle response. Together, these components form a cohesive system that elevates the Magnum R/T’s 5.7L HEMI responsiveness and overall driving experience. Available in MOPAR Orange, Purple, Green, or Steel Gray coil housings to match your engine bay aesthetic.
One-Click Stage 1 Kit: 2005–2008 Magnum 6.1L SRT8
aFe MagnumFORCE Stage-2 Intake System
Filter: Pro 5R (5-layer cotton gauze)
Housing: Sealed XLPE, heat-resistant
Design: CAD-designed, dyno-tuned tube
- Optimized airflow for 5.7L and 6.1L HEMI platform
- Sealed housing reduces intake air temperature
- Washable, reusable Pro 5R filter media
- Clear sight window for filter inspection
- Factory mounting locations for clean install
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +20 HP on 5.7L / 6.1L HEMI
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +20 HP from increased spark energy on HEMI V8s
- Heavy-duty copper core primary winding
- Increased secondary core windings for higher mJ output
- Compatible with naturally aspirated and forced induction
- High-density polymer housing with epoxy-filled internals
E3 Spark Plugs (E3.66)
Part: E3.66
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Three-leg ground electrode maximizes heat transfer
- Stronger, more complete combustion per cycle
- Improved throttle response and fuel economy
- Nickel-plated shell resists corrosion
The Scoop
Why this bundle? The Magnum SRT8’s 6.1L HEMI is already a high-performance engine, and this bundle pushes it further with improved airflow and ignition. The aFe MagnumFORCE Stage-2 intake delivers cooler, denser air while the Ripp HEMI coils boost flame speed with +20 HP from spark energy alone. The E3 plugs maximize combustion efficiency for a combined +40 HP that complements the SRT8’s aggressive character.
Same parts as the 5.7L? Yes — the 5.7L and 6.1L HEMI share the same intake, coil pack, and spark plug compatibility on the LX platform. The MV8-CPK coils and E3.66 plugs fit all 2005–2008 HEMI V8 Magnums. Fitment is confirmed for SRT8 trims specifically.
How hard is the install? Fully bolt-on. Same installation process as the 5.7L bundle. ~2–3 hours total, basic hand tools, no tune required. The SRT8’s engine bay is spacious enough for easy coil access.
The FastHemis One-Click Stage 1 Kit for the 2005–2008 Dodge Magnum 6.1L SRT8 brings the same proven HEMI upgrade formula to the SRT platform. The aFe MagnumFORCE Stage-2 intake system maximizes airflow to the 6.1L’s larger displacement, and the Ripp HEMI coil packs deliver measurably stronger spark energy with their increased winding turn ratio. The E3.66 DiamondFIRE plugs ensure every combustion event is cleaner and more powerful.
This bundle is ideal for Magnum SRT8 owners who want to stack bolt-on gains before or alongside other modifications. All three components are emissions-neutral and safe for stock PCM operation. Curated by FastHemis to deliver maximum combined performance at a better price than sourcing each part individually.
Common Questions
Frequently Asked Questions
Do I need a tune for the Stage 1 bundle?
No. All three components — the aFe intake, Ripp coils, and E3 plugs — are designed to work with the stock PCM. No tuning, no flashing, no ECU modifications. The gains come from improved airflow, stronger spark, and more efficient combustion within stock parameters.
Will the bundle void my factory warranty?
Under the Magnuson-Moss Warranty Act, a dealer cannot void your entire warranty for aftermarket parts. Bolt-on components like intakes, coils, and spark plugs are emissions-neutral and do not modify engine management. Keep your stock parts if you need to revert for dealer visits. The Ripp V6 coil packs are 50-state CARB certified (EO: D-705-2).
Why buy the bundle instead of the parts individually?
The bundle is priced lower than buying each component separately, ships in one order, and every part is confirmed compatible with your exact vehicle and engine. No sourcing three different products, no fitment guesswork, no risk of ordering the wrong part number. One click, one shipment, one install.
Can I install this myself?
Yes. All three components are designed for DIY installation with basic hand tools. The intake swap takes ~1–2 hours, and coils plus plugs take ~1–2 hours. No lift, no special equipment, no wiring. E3 plugs come pre-gapped. Total install time is under 3 hours for the full Stage 1 upgrade.
What’s the difference between the 5.7L and 6.1L SRT8 bundles?
Both Magnum bundles use the same components — aFe MagnumFORCE Stage-2 intake, Ripp HEMI coil packs (MV8-CPK), and E3.66 spark plugs. The 5.7L and 6.1L HEMI share intake and ignition compatibility on the LX platform. Same parts, same +40 HP combined gain, same install process.
What comes after Stage 1?
Stage 2 typically adds a performance exhaust (cat-back or headers) and a tune. Your Stage 1 foundation — intake, coils, plugs — supports and complements those mods. The Ripp coils are also compatible with forced induction, so this bundle works as a pre-supercharger build. Some owners stop at Stage 1 for daily driving; others use it as the starting point for a full build.
Ready for One-Click Horsepower?
Find the curated Stage 1 bundle for your Magnum — 5.7L Hemi or 6.1L SRT8. One click, one shipment, bolt-on gains with zero hassle.
