Stage 1 Bundle
One-Click Horsepower: Curated Stage 1
Bundles for the Ram
Hand-picked by FastHemis for every Ram generation and engine — 2002–2010 Dodge Ram (1500, 2500, 3500 5.7L Hemi), 2011–2018 (3.6L V6, 5.7L Hemi, 6.4L 392), and 2019–2026 (3.6L V6, 5.7L Hemi, 6.4L 392). Each bundle pairs an aFe cold air intake, Ripp high-performance coil packs, and E3 spark plugs for bolt-on gains up to +49 HP — no tune required.
Important
What to Know Before You Buy
What Is a Stage 1 Bundle?
A Stage 1 bundle combines a cold air intake, high-performance ignition coils, and upgraded spark plugs into one curated package. These three components work together to improve airflow, spark energy, and combustion efficiency — delivering noticeable gains without a tune or ECU modifications. 100% bolt-on, safe for stock PCM.
Why Buy the Bundle?
Each bundle is hand-picked by FastHemis specialists for your exact engine and generation. Components are confirmed compatible, tested together, and priced better than buying individually. One click, one shipment, one install — no sourcing, no guesswork.
Installation
DIY-friendly with basic hand tools. Intake swap takes ~1–2 hours, coils and plugs ~1–2 hours. No lift needed, no wiring, no tuning. E3 plugs come pre-gapped. Follow torque specs for coil bolts. Total install: under 3 hours for all three components.
Warranty & Emissions
aFe intakes are 50-state legal. Ripp V6 coil packs carry CARB certification (EO: D-705-2). E3 plugs and Ripp coils are emissions-neutral. Bolt-ons do not void your factory warranty under the Magnuson-Moss Warranty Act unless they cause a related failure.
One-Click Stage 1 Kit: 2002–2010 Ram 1500 5.7L Hemi
aFe Quantum Cold Air Intake System
Filter: Pro DRY S (washable, oil-free)
Housing: Sealed XLPE, heat-resistant
Design: CAD-designed for 2003–2008 Ram 1500 5.7L HEMI
- Engineered for 2003–2008 Dodge Ram 1500 5.7L HEMI
- Roto-molded heat-resistant intake tube
- Powder-coated steel heat shield
- 99.2% filtration efficiency, oil-free
- Uses factory mounting locations
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +20 HP on 5.7L HEMI
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +20 HP from increased spark energy on 5.7L
- Heavy-duty copper core primary winding
- Increased secondary core windings for higher mJ output
- Compatible with naturally aspirated and forced induction
- High-density polymer housing with epoxy-filled internals
E3 Spark Plugs (E3.66)
Part: E3.66
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Three-leg ground electrode maximizes heat transfer
- Stronger, more complete combustion per cycle
- Improved throttle response and fuel economy
- Nickel-plated shell resists corrosion
The Scoop
Why this bundle? The 2002–2010 Ram 1500 5.7L HEMI responds exceptionally well to breathing and ignition upgrades. The aFe Quantum intake replaces the restrictive factory airbox with a high-flow, heat-insulated system that outflows stock significantly. The Ripp HEMI coil packs deliver up to +20 HP alone by accelerating cylinder flame speed. The E3 DiamondFIRE plugs complete the combustion chain for a combined +49 HP that’s felt immediately on throttle.
What’s included? aFe Quantum Cold Air Intake System with Pro DRY S filter, Ripp HEMI High Performance Coil Packs (8-pack, MV8-CPK), and E3 Spark Plugs (E3.66, 16 included). All confirmed for 2002–2010 Dodge Ram 1500 5.7L HEMI.
Will this fit my 2002 or 2009? The aFe Quantum intake is engineered for 2003–2008 Ram 1500 5.7L HEMI. Early 2009 models may share compatibility. Contact FastHemis if you have a 2002 or late 2009/2010 for fitment confirmation. Coils and plugs fit all 2002–2010 5.7L HEMI Rams.
The FastHemis One-Click Stage 1 Kit for the 2002–2010 Dodge Ram 1500 5.7L HEMI combines three expertly selected components into a seamless upgrade path. The aFe Quantum Cold Air Intake replaces the restrictive factory airbox with a high-flow, heat-insulated system. The Ripp HEMI coil packs deliver significantly more spark energy than stock, accelerating flame speed and cylinder pressure for stronger combustion.
Complementing these, the E3 DiamondFIRE spark plugs ensure a more complete burn with their patented three-leg electrode design. Together, these components improve throttle response, horsepower, and fuel efficiency without requiring tuning. Curated by FastHemis for the Ram 1500 5.7L HEMI platform.
One-Click Stage 1 Kit: 2002–2010 Ram 2500 5.7L Hemi
aFe Momentum HD Cold Air Intake System Pro DRY S Filter
Filter: Pro DRY S (washable, oil-free)
Housing: Roto-molded, sealed
Design: CAD-designed for 2007–2009 Ram 2500/3500 5.7L
- Engineered for 2007–2009 Ram 2500/3500 5.7L HEMI
- Sealed airbox design fits under hood
- High-flow Pro DRY S filter, 99.2% filtration
- Roto-molded housing for thermal insulation
- Factory mounting locations for clean install
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +20 HP on 5.7L HEMI
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +20 HP from increased spark energy on 5.7L
- Heavy-duty copper core primary winding
- Increased secondary core windings for higher mJ output
- Compatible with naturally aspirated and forced induction
- High-density polymer housing with epoxy-filled internals
E3 Spark Plugs (E3.66)
Part: E3.66
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Three-leg ground electrode maximizes heat transfer
- Stronger, more complete combustion per cycle
- Improved throttle response and fuel economy
- Nickel-plated shell resists corrosion
The Scoop
Why this bundle? The Ram 2500 5.7L HEMI hauls heavy payloads and tow loads. This bundle adds +49 HP combined — improving throttle response and torque delivery for towing and daily driving. The aFe Momentum HD intake replaces the factory airbox with a sealed, roto-molded housing and high-flow Pro DRY S filter. The Ripp HEMI coils deliver up to +20 HP from spark energy alone.
What’s included? aFe Momentum HD Cold Air Intake System with Pro DRY S filter, Ripp HEMI High Performance Coil Packs (8-pack, MV8-CPK), and E3 Spark Plugs (E3.66, 16 included). All confirmed for 2002–2010 Dodge Ram 2500 5.7L HEMI.
Same parts as the 3500? Yes. The 2500 and 3500 5.7L HEMI share the same intake, coil pack, and spark plug compatibility. The aFe Momentum HD intake fits 2007–2009 Ram 2500/3500 with 5.7L gas or 6.7L Cummins diesel engines. This bundle is for 5.7L HEMI only.
The FastHemis One-Click Stage 1 Kit for the 2002–2010 Dodge Ram 2500 5.7L HEMI pairs an aFe Momentum HD cold air intake with Ripp HEMI coil packs and E3 DiamondFIRE plugs. The intake system replaces the factory airbox with a sealed, heat-resistant housing and high-flow Pro DRY S filter. The Ripp coil packs use heavy-duty copper core windings to boost spark energy significantly over stock.
The E3 plugs stabilize and strengthen ignition with their unique three-leg electrode design. Together, these components form a cohesive system that elevates the Ram 2500’s 5.7L HEMI responsiveness and overall driving experience. Available in MOPAR Orange, Purple, Green, or Steel Gray coil housings.
One-Click Stage 1 Kit: 2002–2010 Ram 3500 5.7L Hemi
aFe Momentum HD Cold Air Intake System Pro DRY S Filter
Filter: Pro DRY S (washable, oil-free)
Housing: Roto-molded, sealed
Design: CAD-designed for 2007–2009 Ram 2500/3500 5.7L
- Engineered for 2007–2009 Ram 2500/3500 5.7L HEMI
- Sealed airbox design fits under hood
- High-flow Pro DRY S filter, 99.2% filtration
- Roto-molded housing for thermal insulation
- Factory mounting locations for clean install
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +20 HP on 5.7L HEMI
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +20 HP from increased spark energy on 5.7L
- Heavy-duty copper core primary winding
- Increased secondary core windings for higher mJ output
- Compatible with naturally aspirated and forced induction
- High-density polymer housing with epoxy-filled internals
E3 Spark Plugs (E3.66)
Part: E3.66
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Three-leg ground electrode maximizes heat transfer
- Stronger, more complete combustion per cycle
- Improved throttle response and fuel economy
- Nickel-plated shell resists corrosion
The Scoop
Why this bundle? The Ram 3500 5.7L HEMI is the workhorse of the fleet. This bundle adds +49 HP combined — improving throttle response and torque delivery for towing and daily driving. The aFe Momentum HD intake and Ripp HEMI coils are the same proven components used in the 2500 bundle. The E3 DiamondFIRE plugs complete the combustion chain.
What’s included? aFe Momentum HD Cold Air Intake System with Pro DRY S filter, Ripp HEMI High Performance Coil Packs (8-pack, MV8-CPK), and E3 Spark Plugs (E3.66, 16 included). All confirmed for 2002–2010 Dodge Ram 3500 5.7L HEMI.
Will this fit my 3500? Yes. The aFe Momentum HD intake fits 2007–2009 Ram 2500/3500 with 5.7L gas or 6.7L Cummins. This bundle is for 5.7L HEMI only. Same intake, coils, and plugs as the 2500 bundle. Fully bolt-on, ~2–3 hours total install.
The FastHemis One-Click Stage 1 Kit for the 2002–2010 Dodge Ram 3500 5.7L HEMI brings the same proven HEMI upgrade formula to the heavy-duty platform. The aFe Momentum HD intake replaces the factory airbox with a sealed, roto-molded housing and high-flow Pro DRY S filter. The Ripp HEMI coil packs deliver measurably stronger spark energy with their increased winding turn ratio.
The E3.66 DiamondFIRE plugs ensure every combustion event is cleaner and more powerful. This bundle is ideal for Ram 3500 owners who want to stack bolt-on gains before or alongside other modifications. All three components are emissions-neutral and safe for stock PCM operation.
One-Click Stage 1 Kit: 2011–2018 Ram 1500 3.6L V6
aFe Momentum GT Cold Air Intake System Pro DRY S Filter
Filter: Pro DRY S (washable, oil-free)
Housing: Sealed XLPE, heat-resistant
Design: CAD-designed for 4th Gen Ram 1500 3.6L
- Engineered for 2011–2018 Ram 1500 3.6L Pentastar
- One-piece roto-molded XLPE housing for thermal insulation
- Large inverted-top performance air filter
- Clear sight window for filter inspection
- Uses factory mounting locations
Ripp Performance Coil Packs
Part: 1118CPK36
HP Gain: +15–20 HP
Set: 6 coils
CARB: Certified (EO: D-705-2)
- 10% more power than OEM coil packs
- 50-state CARB certified — 100% street legal
- Direct bolt-on, plug and play
- Compatible with supercharged and non-supercharged engines
- Improved throttle response and fuel economy
E3 Spark Plugs (E3.82)
Part: E3.82
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 6 plugs included
- Patented DiamondFIRE electrode technology
- Two-leg ground electrode for enhanced turbulence
- OEM-compatible: 12mm thread, 1.000” reach, gasket seat
- Improved combustion efficiency and fuel economy
- Reduced hydrocarbon emissions
The Scoop
Why this bundle? The 2011–2018 Ram 1500 3.6L Pentastar V6 powers Tradesman, Big Horn, and Laramie trims. This bundle adds +44 HP combined by pairing the aFe Momentum GT intake with Ripp’s CARB-certified coil packs that deliver +15–20 HP through increased spark energy, all completed by E3 DiamondFIRE plugs for optimal combustion.
What’s included? aFe Momentum GT Cold Air Intake System with Pro DRY S filter, Ripp Performance Coil Packs (1118CPK36, 6-pack, CARB certified), and E3 Spark Plugs (E3.82, 6 included). All confirmed for 2011–2018 Ram 1500 3.6L V6.
Same as 2019–2024? The 3.6L Pentastar uses similar components across 2011–2024 Ram 1500. FastHemis offers separate bundles to confirm exact fitment for your generation. The 2019–2024 bundle uses the same intake and coils; check product pages for year-specific fitment.
The FastHemis One-Click Stage 1 Kit for the 2011–2018 Ram 1500 3.6L V6 combines the aFe Momentum GT Cold Air Intake, Ripp Performance Coil Packs, and E3 DiamondFIRE spark plugs. The intake increases airflow with a roto-molded XLPE housing and high-flow Pro DRY S filter. The CARB-certified Ripp coil packs boost spark energy for +15–20 HP through faster combustion.
The E3.82 plugs ensure every combustion event delivers maximum efficiency. All components install with basic hand tools, require no tuning, and are safe for the stock PCM. Curated by FastHemis for the 4th Gen Ram 1500 3.6L Pentastar platform.
One-Click Stage 1 Kit: 2011–2018 Ram 1500 5.7L Hemi
aFe Momentum GT PRO Intake System
Filter: Pro 5R (5-layer cotton gauze)
Housing: Sealed XLPE, heat-resistant
Design: Dyno-tuned for 4th Gen Ram 1500 5.7L
- Optimized for 2011–2018 Ram 1500 5.7L HEMI
- Sealed housing reduces intake air temperature
- Washable, reusable Pro 5R filter media
- Clear sight window for filter inspection
- Factory mounting locations for clean install
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +20 HP on 5.7L HEMI
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +20 HP from increased spark energy on 5.7L
- Heavy-duty copper core primary winding
- Increased secondary core windings for higher mJ output
- Compatible with naturally aspirated and forced induction
- High-density polymer housing with epoxy-filled internals
E3 Spark Plugs (E3.68)
Part: E3.68
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Full-size center electrode with three ground legs
- 14mm thread, 1.000” reach, gasket seat
- Improved combustion efficiency and throttle response
- Reduced fuel consumption and emissions
The Scoop
Why this bundle? The 2011–2018 Ram 1500 5.7L HEMI responds exceptionally well to breathing and ignition upgrades. The aFe Momentum GT PRO intake feeds cooler, denser air to the HEMI while the Ripp HEMI coil packs deliver up to +20 HP alone by accelerating cylinder flame speed. The E3 DiamondFIRE plugs complete the combustion chain for a combined +44 HP.
What’s included? aFe Momentum GT PRO Intake System with Pro 5R filter, Ripp HEMI High Performance Coil Packs (8-pack, MV8-CPK), and E3 Spark Plugs (E3.68, 16 included). All confirmed for 2011–2018 Ram 1500 5.7L HEMI.
Building toward a supercharger? This Stage 1 foundation works perfectly as a pre-supercharger build. The Ripp coils are compatible with forced induction, the aFe intake supports higher airflow, and the E3 plugs provide reliable ignition under boosted conditions. Install now, supercharge later.
The FastHemis One-Click Stage 1 Kit for the 2011–2018 Ram 1500 5.7L Hemi pairs an aFe Momentum GT PRO cold air intake with Ripp HEMI coil packs and E3 DiamondFIRE plugs. The intake system replaces the factory airbox with a sealed, heat-resistant housing and high-flow Pro 5R filter. The Ripp coil packs use heavy-duty copper core windings to boost spark energy significantly over stock.
The E3 plugs stabilize and strengthen ignition with their unique three-leg electrode design. Together, these components form a cohesive system that elevates the Ram 1500’s 5.7L HEMI responsiveness. Direct bolt-on, no tune, no modifications.
One-Click Stage 1 Kit: 2011–2018 Ram 2500 5.7L Hemi
aFe Momentum HD Cold Air Intake System Pro DRY S Filter
Filter: Pro DRY S (washable, oil-free)
Housing: Roto-molded, sealed
Design: CAD-designed for 4th Gen Ram 2500/3500 5.7L
- Engineered for 2011–2018 Ram 2500/3500 5.7L HEMI
- Sealed airbox design fits under hood
- High-flow Pro DRY S filter, 99.2% filtration
- Roto-molded housing for thermal insulation
- Factory mounting locations for clean install
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +20 HP on 5.7L HEMI
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +20 HP from increased spark energy on 5.7L
- Heavy-duty copper core primary winding
- Increased secondary core windings for higher mJ output
- Compatible with naturally aspirated and forced induction
- High-density polymer housing with epoxy-filled internals
E3 Spark Plugs (E3.68)
Part: E3.68
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Full-size center electrode with three ground legs
- 14mm thread, 1.000” reach, gasket seat
- Improved combustion efficiency and throttle response
- Reduced fuel consumption and emissions
The Scoop
Why this bundle? The 2011–2018 Ram 2500 5.7L HEMI hauls and tows. This bundle adds +44 HP combined — improving throttle response and torque delivery. The aFe Momentum HD intake replaces the factory airbox with a sealed, roto-molded housing. The Ripp HEMI coils deliver up to +20 HP from spark energy alone. The E3 DiamondFIRE plugs complete the combustion chain.
What’s included? aFe Momentum HD Cold Air Intake System with Pro DRY S filter, Ripp HEMI High Performance Coil Packs (8-pack, MV8-CPK), and E3 Spark Plugs (E3.68, 16 included). All confirmed for 2011–2018 Ram 2500 5.7L HEMI.
Same parts as 3500? Yes. The 2500 and 3500 5.7L HEMI share the same intake, coil pack, and spark plug compatibility. Fully bolt-on, ~2–3 hours total install. No tune required.
The FastHemis One-Click Stage 1 Kit for the 2011–2018 Ram 2500 5.7L HEMI pairs an aFe Momentum HD cold air intake with Ripp HEMI coil packs and E3 DiamondFIRE plugs. The intake system replaces the factory airbox with a sealed, heat-resistant housing and high-flow Pro DRY S filter. The Ripp coil packs use heavy-duty copper core windings to boost spark energy significantly over stock.
Together, these components form a cohesive system that elevates the Ram 2500’s 5.7L HEMI responsiveness for towing and daily driving. Curated by FastHemis for the 4th Gen Ram 2500 platform.
One-Click Stage 1 Kit: 2011–2018 Ram 2500 6.4L 392
aFe Momentum GT Cold Air Intake
Filter: 10” 360° radial flow Pro 5R
Housing: Sealed XLPE, heat-resistant
Design: Dyno-tuned for 6.4L 392
- Optimized for the 6.4L 392 HEMI’s higher airflow demands
- Sealed XLPE housing reduces intake air temperature
- 5-layer Pro 5R cotton gauze filter, washable
- Patent-pending filter-to-housing interface
- Clear sight window for easy inspection
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +25–30 whp on 6.4L
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +25–30 whp from increased spark energy on 6.4L
- Heavy-duty copper core with stronger iron laminations
- Precision orthocyclic winding for consistent output
- Epoxy-filled housing resists shock, vibration, and chemicals
- Sustained power delivery at high-RPM operation
E3 Spark Plugs (E3.74)
Part: E3.74
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Engineered for high-displacement HEMI V8s
- Stronger, more complete combustion per cycle
- Improved throttle response and fuel economy
- 100,000-mile / 5-year durability rating
The Scoop
Why this bundle? The Ram 2500 6.4L 392 HEMI is a powerhouse. This bundle adds +46 HP combined by maximizing airflow and combustion efficiency. The Ripp HEMI coils deliver their best gains on the 6.4L — up to +25–30 whp from spark energy alone — making this the most cost-effective bolt-on HP per dollar for the 392.
What’s included? aFe Momentum GT Cold Air Intake System with Pro 5R Filter, Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), and E3 Spark Plugs (E3.74, 16 included). All confirmed for 2011–2018 Ram 2500 6.4L 392.
Can I stack this with other mods? Absolutely. Stage 1 is the foundation. These components complement headers, exhaust, and tunes. The Ripp coils are compatible with both naturally aspirated and forced induction setups.
The FastHemis One-Click Stage 1 Kit for the 2011–2018 Ram 2500 6.4L 392 targets the three most impactful bolt-on areas for the 392 HEMI platform. The aFe Momentum GT intake feeds the 392’s larger displacement with cooler, denser air through a 10-inch radial flow Pro 5R filter. The Ripp HEMI coil packs deliver their peak performance on this engine — up to +25–30 whp from increased spark intensity.
The E3.74 spark plugs are engineered specifically for high-displacement HEMI V8s. This bundle is the ideal starting point for Ram 2500 6.4L owners who want measurable gains with zero downtime. Direct bolt-on, no tune, no modifications.
One-Click Stage 1 Kit: 2011–2018 Ram 3500 6.4L 392
aFe Momentum GT Cold Air Intake
Filter: 10” 360° radial flow Pro 5R
Housing: Sealed XLPE, heat-resistant
Design: Dyno-tuned for 6.4L 392
- Optimized for the 6.4L 392 HEMI’s higher airflow demands
- Sealed XLPE housing reduces intake air temperature
- 5-layer Pro 5R cotton gauze filter, washable
- Patent-pending filter-to-housing interface
- Clear sight window for easy inspection
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +25–30 whp on 6.4L
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +25–30 whp from increased spark energy on 6.4L
- Heavy-duty copper core with stronger iron laminations
- Precision orthocyclic winding for consistent output
- Epoxy-filled housing resists shock, vibration, and chemicals
- Sustained power delivery at high-RPM operation
E3 Spark Plugs (E3.74)
Part: E3.74
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Engineered for high-displacement HEMI V8s
- Stronger, more complete combustion per cycle
- Improved throttle response and fuel economy
- 100,000-mile / 5-year durability rating
The Scoop
Why this bundle? The Ram 3500 6.4L 392 HEMI is the top-tier heavy-duty option. This bundle adds +46 HP combined by maximizing airflow and combustion efficiency. The Ripp HEMI coils deliver their best gains on the 6.4L — up to +25–30 whp from spark energy alone. Same intake, coils, and plugs as the 2500 6.4L bundle.
What’s included? aFe Momentum GT Cold Air Intake System with Pro 5R Filter, Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), and E3 Spark Plugs (E3.74, 16 included). All confirmed for 2011–2018 Ram 3500 6.4L 392.
Same as 2500 6.4L? Yes. The 2500 and 3500 6.4L 392 share the same intake, coil pack, and spark plug compatibility. Fully bolt-on, ~2–3 hours total install. No tune required.
The FastHemis One-Click Stage 1 Kit for the 2011–2018 Ram 3500 6.4L 392 brings the same proven 392 upgrade formula to the heavy-duty platform. The aFe Momentum GT intake feeds the 392’s larger displacement with cooler, denser air. The Ripp HEMI coil packs achieve their highest output on this engine — up to +25–30 whp from increased spark intensity.
The E3.74 spark plugs are engineered specifically for high-displacement HEMI V8s. This bundle is ideal for Ram 3500 6.4L owners who want measurable gains with zero downtime. Direct bolt-on, no tune, no modifications.
One-Click Stage 1 Kit: 2019–2024 Ram 1500 3.6L V6
aFe Momentum GT Cold Air Intake System Pro DRY S Filter
Filter: Pro DRY S (washable, oil-free)
Housing: Sealed XLPE, heat-resistant
Design: CAD-designed for 5th Gen Ram 1500 3.6L
- Engineered for 2019–2024 Ram 1500 3.6L Pentastar
- One-piece roto-molded XLPE housing for thermal insulation
- Large inverted-top performance air filter
- Clear sight window for filter inspection
- Uses factory mounting locations
Ripp Performance Coil Packs
Part: 1118CPK36
HP Gain: +15–20 HP
Set: 6 coils
CARB: Certified (EO: D-705-2)
- 10% more power than OEM coil packs
- 50-state CARB certified — 100% street legal
- Direct bolt-on, plug and play
- Compatible with supercharged and non-supercharged engines
- Improved throttle response and fuel economy
E3 Spark Plugs (E3.82)
Part: E3.82
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 6 plugs included
- Patented DiamondFIRE electrode technology
- Two-leg ground electrode for enhanced turbulence
- OEM-compatible: 12mm thread, 1.000” reach, gasket seat
- Improved combustion efficiency and fuel economy
- Reduced hydrocarbon emissions
The Scoop
Why this bundle? The 2019–2024 Ram 1500 3.6L Pentastar V6 powers Tradesman, Big Horn, Laramie, and Limited trims. This bundle adds +44 HP combined by pairing the aFe Momentum GT intake with Ripp’s CARB-certified coil packs that deliver +15–20 HP through increased spark energy, all completed by E3 DiamondFIRE plugs.
What’s included? aFe Momentum GT Cold Air Intake System with Pro DRY S filter, Ripp Performance Coil Packs (1118CPK36, 6-pack, CARB certified), and E3 Spark Plugs (E3.82, 6 included). All confirmed for 2019–2024 Ram 1500 3.6L V6, including Classic and DT.
Ram 1500 Classic? The 2019–2021 Ram 1500 Classic (DS) shares the same 3.6L Pentastar platform as the 2011–2018 Ram 1500. FastHemis offers separate bundles to confirm exact fitment. Contact us if you have a Classic.
The FastHemis One-Click Stage 1 Kit for the 2019–2024 Ram 1500 3.6L V6 combines the aFe Momentum GT Cold Air Intake, Ripp Performance Coil Packs, and E3 DiamondFIRE spark plugs. The intake increases airflow with a roto-molded XLPE housing and high-flow Pro DRY S filter. The CARB-certified Ripp coil packs boost spark energy for +15–20 HP through faster combustion.
The E3.82 plugs ensure every combustion event delivers maximum efficiency. All components install with basic hand tools, require no tuning, and are safe for the stock PCM. Curated by FastHemis for the 5th Gen Ram 1500 3.6L Pentastar platform.
One-Click Stage 1 Kit: 2019–2024 Ram 1500 5.7L Hemi
aFe Momentum GT Red Edition Cold Air Intake System w/ Pro DRY S Filter
Filter: Pro DRY S (washable, oil-free)
Housing: Sealed XLPE, heat-resistant
Design: Dyno-tuned for 5th Gen Ram 1500 5.7L
- Engineered for 2019–2024 Ram 1500 5.7L HEMI (DT)
- Red Edition styling for engine bay accent
- Sealed housing reduces intake air temperature
- Washable, reusable Pro DRY S filter media
- Factory mounting locations for clean install
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +20 HP on 5.7L HEMI
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +20 HP from increased spark energy on 5.7L
- Heavy-duty copper core primary winding
- Increased secondary core windings for higher mJ output
- Compatible with naturally aspirated and forced induction
- High-density polymer housing with epoxy-filled internals
E3 Spark Plugs (E3.68)
Part: E3.68
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Full-size center electrode with three ground legs
- 14mm thread, 1.000” reach, gasket seat
- Improved combustion efficiency and throttle response
- Reduced fuel consumption and emissions
The Scoop
Why this bundle? The 2019–2024 Ram 1500 5.7L HEMI (DT platform) uses eTorque on some trims. This bundle adds +38 HP combined with the aFe Momentum GT Red Edition intake — DT-specific fitment — Ripp HEMI coil packs (+20 HP from spark energy), and E3 DiamondFIRE plugs. The Red Edition intake adds a distinctive engine bay accent.
What’s included? aFe Momentum GT Red Edition Cold Air Intake System with Pro DRY S filter, Ripp HEMI High Performance Coil Packs (8-pack, MV8-CPK), and E3 Spark Plugs (E3.68, 16 included). All confirmed for 2019–2024 Ram 1500 5.7L HEMI (DT).
What about eTorque? The 5.7L HEMI with eTorque (48V mild hybrid) uses the same coil pack and spark plug compatibility. The aFe intake is designed for the DT platform. No modifications needed for eTorque models.
The FastHemis One-Click Stage 1 Kit for the 2019–2024 Ram 1500 5.7L Hemi pairs the aFe Momentum GT Red Edition cold air intake with Ripp HEMI coil packs and E3 DiamondFIRE plugs. The intake system is DT-specific for correct fitment and replaces the factory airbox with a sealed, heat-resistant housing and high-flow Pro DRY S filter. The Ripp coil packs use heavy-duty copper core windings to boost spark energy significantly over stock.
The E3 plugs stabilize and strengthen ignition with their unique three-leg electrode design. Together, these components form a cohesive system that elevates the 5th Gen Ram 1500’s 5.7L HEMI responsiveness. Direct bolt-on, no tune, no modifications.
One-Click Stage 1 Kit: 2019–2026 Ram 2500 6.4L 392
aFe Momentum GT Cold Air Intake
Filter: 10” 360° radial flow Pro 5R
Housing: Sealed XLPE, heat-resistant
Design: Dyno-tuned for 5th Gen Ram 2500/3500 6.4L
- Optimized for 2019–2026 Ram 2500/3500 6.4L 392 HEMI
- Sealed XLPE housing reduces intake air temperature
- 5-layer Pro 5R cotton gauze filter, washable
- Patent-pending filter-to-housing interface
- Clear sight window for easy inspection
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +25–30 whp on 6.4L
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +25–30 whp from increased spark energy on 6.4L
- Heavy-duty copper core with stronger iron laminations
- Precision orthocyclic winding for consistent output
- Epoxy-filled housing resists shock, vibration, and chemicals
- Sustained power delivery at high-RPM operation
E3 Spark Plugs (E3.74)
Part: E3.74
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Engineered for high-displacement HEMI V8s
- Stronger, more complete combustion per cycle
- Improved throttle response and fuel economy
- 100,000-mile / 5-year durability rating
The Scoop
Why this bundle? The 2019–2026 Ram 2500 6.4L 392 HEMI is the top-tier heavy-duty option. This bundle adds +48 HP combined — the highest gain for the 5th Gen 392 — by maximizing airflow and combustion efficiency. The Ripp HEMI coils deliver their best gains on the 6.4L — up to +25–30 whp from spark energy alone.
What’s included? aFe Momentum GT Cold Air Intake System with Pro 5R Filter, Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), and E3 Spark Plugs (E3.74, 16 included). All confirmed for 2019–2026 Ram 2500 6.4L 392.
Same as 3500? Yes. The 2500 and 3500 6.4L 392 share the same intake, coil pack, and spark plug compatibility. Fully bolt-on, ~2–3 hours total install. No tune required.
The FastHemis One-Click Stage 1 Kit for the 2019–2026 Ram 2500 6.4L 392 targets the three most impactful bolt-on areas for the 5th Gen 392 HEMI platform. The aFe Momentum GT intake feeds the 392’s larger displacement with cooler, denser air through a 10-inch radial flow Pro 5R filter. The Ripp HEMI coil packs deliver their peak performance on this engine — up to +25–30 whp from increased spark intensity.
The E3.74 spark plugs are engineered specifically for high-displacement HEMI V8s. This bundle is the ideal starting point for Ram 2500 6.4L owners who want measurable gains with zero downtime. Direct bolt-on, no tune, no modifications.
One-Click Stage 1 Kit: 2019–2026 Ram 3500 6.4L 392
aFe Momentum GT Cold Air Intake
Filter: 10” 360° radial flow Pro 5R
Housing: Sealed XLPE, heat-resistant
Design: Dyno-tuned for 5th Gen Ram 2500/3500 6.4L
- Optimized for 2019–2026 Ram 2500/3500 6.4L 392 HEMI
- Sealed XLPE housing reduces intake air temperature
- 5-layer Pro 5R cotton gauze filter, washable
- Patent-pending filter-to-housing interface
- Clear sight window for easy inspection
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
HP Gain: +25–30 whp on 6.4L
Set: 8 coils
Colors: MOPAR Orange, Purple, Green, Steel Gray
- Up to +25–30 whp from increased spark energy on 6.4L
- Heavy-duty copper core with stronger iron laminations
- Precision orthocyclic winding for consistent output
- Epoxy-filled housing resists shock, vibration, and chemicals
- Sustained power delivery at high-RPM operation
E3 Spark Plugs (E3.74)
Part: E3.74
Life: 100,000 miles / 5 years
Gap: Pre-gapped, fixed
Qty: 16 plugs included
- Patented DiamondFIRE electrode technology
- Engineered for high-displacement HEMI V8s
- Stronger, more complete combustion per cycle
- Improved throttle response and fuel economy
- 100,000-mile / 5-year durability rating
The Scoop
Why this bundle? The Ram 3500 6.4L 392 HEMI is the workhorse of the 5th Gen fleet. This bundle adds +48 HP combined — the highest gain for the 5th Gen 392 — by maximizing airflow and combustion efficiency. Same intake, coils, and plugs as the 2500 6.4L bundle. The Ripp HEMI coils deliver up to +25–30 whp from spark energy alone.
What’s included? aFe Momentum GT Cold Air Intake System with Pro 5R Filter, Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), and E3 Spark Plugs (E3.74, 16 included). All confirmed for 2019–2026 Ram 3500 6.4L 392.
Same as 2500 6.4L? Yes. The 2500 and 3500 6.4L 392 share the same intake, coil pack, and spark plug compatibility. Fully bolt-on, ~2–3 hours total install. No tune required.
The FastHemis One-Click Stage 1 Kit for the 2019–2026 Ram 3500 6.4L 392 brings the same proven 392 upgrade formula to the heavy-duty platform. The aFe Momentum GT intake feeds the 392’s larger displacement with cooler, denser air. The Ripp HEMI coil packs achieve their highest output on this engine — up to +25–30 whp from increased spark intensity.
The E3.74 spark plugs are engineered specifically for high-displacement HEMI V8s. This bundle is ideal for Ram 3500 6.4L owners who want measurable gains with zero downtime. Direct bolt-on, no tune, no modifications.
Common Questions
Frequently Asked Questions
Do I need a tune for the Stage 1 bundle?
No. All three components — the aFe intake, Ripp coils, and E3 plugs — are designed to work with the stock PCM. No tuning, no flashing, no ECU modifications. The gains come from improved airflow, stronger spark, and more efficient combustion within stock parameters.
Will the bundle void my factory warranty?
Under the Magnuson-Moss Warranty Act, a dealer cannot void your entire warranty for aftermarket parts. Bolt-on components like intakes, coils, and spark plugs are emissions-neutral and do not modify engine management. Keep your stock parts if you need to revert for dealer visits. The Ripp V6 coil packs are 50-state CARB certified (EO: D-705-2).
Why buy the bundle instead of the parts individually?
The bundle is priced lower than buying each component separately, ships in one order, and every part is confirmed compatible with your exact vehicle and engine. No sourcing three different products, no fitment guesswork, no risk of ordering the wrong part number. One click, one shipment, one install.
Can I install this myself?
Yes. All three components are designed for DIY installation with basic hand tools. The intake swap takes ~1–2 hours, and coils plus plugs take ~1–2 hours. No lift, no special equipment, no wiring. E3 plugs come pre-gapped. Total install time is under 3 hours for the full Stage 1 upgrade.
What’s the difference between the 5.7L and 6.4L bundles?
Both HEMI bundles use the same Ripp HEMI coil packs (MV8-CPK, 8-pack) but with different intakes (engine-specific aFe fitment) and different E3 plug part numbers (E3.68 for 5.7L, E3.74 for 6.4L). The Ripp coils deliver +20 HP on the 5.7L and +25–30 whp on the 6.4L due to the larger displacement responding more to spark energy improvements.
What comes after Stage 1?
Stage 2 typically adds a performance exhaust (cat-back or headers) and a tune. Your Stage 1 foundation — intake, coils, plugs — supports and complements those mods. The Ripp coils are also compatible with forced induction, so this bundle works as a pre-supercharger build. Some owners stop at Stage 1 for daily driving; others use it as the starting point for a full build.
Ready for One-Click Horsepower?
Find the curated Stage 1 bundle for your Ram — every generation, every engine. One click, one shipment, bolt-on gains with zero hassle.
