Stage 2 Bundle
One-Click Horsepower: Curated Stage 2
Bundles for the Ram
Hand-picked by FastHemis for every Ram generation and engine — 2002–2010 Dodge Ram 1500 / 2500 / 3500 (5.7L Hemi), 2011–2018 Ram 1500 (3.6L V6, 5.7L Hemi) and Ram 2500 / 3500 (5.7L Hemi, 6.4L 392), plus 2019–2024 Ram 1500 5.7L and 2019–2026 Ram 2500 / 3500 6.4L 392. Each bundle combines an aFe cold air intake, Ripp high-performance coil packs, E3 spark plugs, a performance cat-back exhaust, and a throttle body upgrade for bolt-on gains from +68 to +79 HP — no tune required.
Important
What to Know Before You Buy
What Is a Stage 2 Bundle?
Everything in Stage 1 (cold air intake, high-performance coils, spark plugs) plus a cat-back exhaust system and throttle body upgrade. Five components working together for maximum bolt-on gains — no tune required, safe for stock PCM. Stage 2 adds exhaust flow and throttle response on top of the airflow and ignition improvements from Stage 1.
Why Buy the Bundle?
Each Stage 2 bundle is hand-picked by FastHemis specialists for your exact Ram model and engine (1500, 2500, or 3500). All five components are confirmed compatible in the listing, priced better than buying individually, and ship as one order. No sourcing five SKUs or guessing which cat-back fits your cab, bed, and emissions package.
Installation
Plan on 3–6 hours on a truck: intake, coils, and plugs (~2 hours), throttle body (~30 minutes; BBK Pentastar TB may need a short pedal relearn per BBK), cat-back (~2–3 hours) — a lift, tall jack stands, and an extra set of hands help on HD trucks. Basic hand tools, no wiring, no tuning for the HEMI 90mm path.
Warranty & Emissions
aFe intakes are 50-state legal where applicable. Ripp V6 coil packs carry CARB certification (EO: D-705-2). E3 plugs and Ripp HEMI coils are emissions-neutral with appropriate plugs. Exhaust systems and some throttle bodies may be restricted for street use in certain states — check local regulations. Bolt-ons do not void your factory warranty under the Magnuson-Moss Warranty Act unless they cause a related failure.
One-Click Stage 2 Kit: 2002–2010 Ram 1500 5.7L Hemi
AFE Quantum Cold Air Intake System
Part: 53-10013D
Application: 2003–2008 Ram 1500 5.7L Hemi (per aFe)
Filter: Pro DRY S (washable, oil-free)
Design: Sealed housing, XLPE tube
- Quantum intake replaces the restrictive factory air path on 5.7L Ram 1500
- Pro DRY S filter — washable, oil-free, high filtration efficiency
- Roto-molded housing and XLPE tube tuned for cooler intake air
- Direct-fit install using factory mounting locations
- Pairs with the 90mm throttle body and cat-back in this Stage 2 bundle
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Up to ~+20 HP potential on 5.7L
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.66
Qty: 8 plugs included
Gap: Pre-gapped, fixed
Tech: DiamondFIRE electrode
- DiamondFIRE technology for efficient flame kernel growth
- Three-legged ground electrode improves heat transfer
- Pre-gapped fixed-gap design — eight plugs included
- Long-life nickel-plated shell resists corrosion
- Tuned for classic 5.7L / 6.1L HEMI platforms in the E3 line
aFe LARGE Bore-HD 4" 409 SS Cat-Back Exhaust System
System: aFe LARGE Bore-HD 4" 409 SS Cat-Back
Pipe: 4" mandrel-bent 409 stainless
Design: High-flow path vs. stock truck exhaust
Install: Bolt-on cat-back
- 409 stainless LARGE Bore-HD 4-inch cat-back for Hemi truck applications
- Mandrel-bent tubing improves flow vs. stock muffler and piping
- Aggressive exhaust note under load while retaining daily-drive manners
- Built for HD heat cycles and under-truck exposure
- Bolt-on install from the catalytic converter rearward
aFe 90mm Throttle Body Kit
Part: 46-39112
Bore: 90mm billet
Replaces: Factory 80mm (typical HEMI truck TB)
Tune: Not required per aFe
- 90mm bore replaces restrictive factory 80mm HEMI throttle body
- CNC-machined billet aluminum construction
- Swirl-inducing adapter aids mixture motion per aFe
- OEM electronics compatibility — no tune required per aFe
- Complete hardware and gaskets in the kit
The Scoop
Why this bundle? This 2002–2010 Ram 1500 5.7L Stage 2 bundle delivers +79 HP combined: Quantum intake (53-10013D), Ripp MV8-CPK coils, E3.66 plugs, aFe LARGE Bore-HD 4" 409 cat-back, and aFe 90mm throttle body (46-39112). It is a complete airflow, ignition, and exhaust loop with no PCM tuning.
What’s included? AFE Quantum Cold Air Intake System (53-10013D), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.66, 8 included), aFe LARGE Bore-HD 4" 409 SS Cat-Back Exhaust System, and aFe 90mm Throttle Body Kit (46-39112). Confirmed for 2002–2010 Dodge Ram 1500 5.7L Hemi per the bundle listing.
Will this cat-back fit my cab and bed configuration? Confirm cab, bed length, and emissions equipment with FastHemis before ordering — HD and classic Ram trucks vary by wheelbase and factory exhaust routing.
The aFe LARGE Bore-HD 4-inch 409 stainless cat-back is the halo exhaust in this classic Ram 1500 Stage 2 kit: larger-diameter mandrel-bent tubing and a high-flow muffler strategy replace the restrictive factory system for a deeper Hemi note and better flow.
Together with the Quantum intake, 90mm throttle body, Ripp MV8-CPK coils, and E3.66 plugs, you get +79 HP combined — five bolt-ons, stock PCM, one weekend install on jack stands or a lift.
One-Click Stage 2 Kit: 2002–2010 Ram 2500 5.7L Hemi
aFe Momentum HD Cold Air Intake System Pro DRY S Filter
Part: 51-72003
System: Momentum HD Pro DRY S
Application: HD Ram gas (per aFe listing)
Housing: Roto-molded sealed airbox
- Momentum HD replaces the factory airbox on HD Ram 5.7L platforms
- Pro DRY S media for strong filtration without oiled-filter maintenance
- Roto-molded housing seals against engine bay heat
- Engineered for 2500-series airflow demand and towing duty
- Confirmed in this FastHemis bundle for 2002–2010 Ram 2500 5.7L
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Up to ~+20 HP potential on 5.7L
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.66
Qty: 8 plugs included
Gap: Pre-gapped, fixed
Tech: DiamondFIRE electrode
- DiamondFIRE technology for efficient flame kernel growth
- Three-legged ground electrode improves heat transfer
- Pre-gapped fixed-gap design — eight plugs included
- Long-life nickel-plated shell resists corrosion
- Tuned for classic 5.7L / 6.1L HEMI platforms in the E3 line
aFe LARGE Bore-HD 4" 409 SS Cat-Back Exhaust System
System: aFe LARGE Bore-HD 4" 409 SS Cat-Back
Pipe: 4" mandrel-bent 409 stainless
Design: HD truck routing vs. factory
Install: Bolt-on cat-back
- 409 stainless LARGE Bore-HD 4-inch cat-back path
- Frees exhaust flow for the 5.7L Hemi under trailer load
- Deeper tone than stock without a full custom fab job
- 409 stainless resists corrosion in harsh climates
- Completes the Stage 2 loop with intake, TB, coils, and plugs
aFe 90mm Throttle Body Kit
Part: 46-39112
Bore: 90mm billet
Replaces: Factory throttle body
Tune: Not required per aFe
- 90mm bore replaces restrictive factory 80mm HEMI throttle body
- CNC-machined billet aluminum construction
- Swirl-inducing adapter aids mixture motion per aFe
- OEM electronics compatibility — no tune required per aFe
- Complete hardware and gaskets in the kit
The Scoop
Why this bundle? The 2002–2010 Ram 2500 5.7L kit targets +79 HP with Momentum HD intake (51-72003), Ripp MV8-CPK, E3.66, the same LARGE Bore-HD 4" 409 cat-back family, and 90mm TB. It is curated for three-quarter-ton Hemi trucks that work for a living.
What’s included? aFe Momentum HD Cold Air Intake System Pro DRY S Filter (51-72003), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.66, 8 included), aFe LARGE Bore-HD 4" 409 SS Cat-Back Exhaust System, and aFe 90mm Throttle Body Kit (46-39112). Confirmed for 2002–2010 Dodge Ram 2500 5.7L Hemi.
Same exhaust as the 1500 bundle? The cat-back SKU is matched per engine and generation in the FastHemis listing — verify fitment notes on the product page for your exact truck.
HD Ram 2500 trucks benefit from the same LARGE Bore-HD 4" 409 path: improved scavenging when you are towing or climbing grades, with an aggressive tone that matches a working 5.7L Hemi.
Momentum HD seals the intake side while the 90mm TB and Ripp coils maximize each combustion event — +79 HP combined without opening the PCM.
One-Click Stage 2 Kit: 2002–2010 Ram 3500 5.7L Hemi
aFe Momentum HD Cold Air Intake System Pro DRY S Filter
Part: 51-72003
System: Momentum HD Pro DRY S
Application: HD Ram gas (per aFe listing)
Housing: Roto-molded sealed airbox
- Same Momentum HD architecture as the 2500 bundle — tuned for 3500 duty
- Pro DRY S filter is washable and reusable
- High-flow path supports sustained pulls and heavy cargo
- Bolt-on install with HD truck-friendly packaging
- Matched by FastHemis to your 3500 5.7L Hemi listing
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Up to ~+20 HP potential on 5.7L
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.66
Qty: 8 plugs included
Gap: Pre-gapped, fixed
Tech: DiamondFIRE electrode
- DiamondFIRE technology for efficient flame kernel growth
- Three-legged ground electrode improves heat transfer
- Pre-gapped fixed-gap design — eight plugs included
- Long-life nickel-plated shell resists corrosion
- Tuned for classic 5.7L / 6.1L HEMI platforms in the E3 line
aFe LARGE Bore-HD 4" 409 SS Cat-Back Exhaust System
System: aFe LARGE Bore-HD 4" 409 SS Cat-Back
Pipe: 4" mandrel-bent 409 stainless
Design: HD truck routing vs. factory
Install: Bolt-on cat-back
- 4-inch 409 stainless LARGE Bore-HD cat-back
- Improved scavenging vs. factory for loaded 3500 driving
- Commanding exhaust presence when you roll into the throttle
- Designed as a complete cat-back replacement
- Works with the 90mm throttle body and Quantum/Momentum HD intake path
aFe 90mm Throttle Body Kit
Part: 46-39112
Bore: 90mm billet
Replaces: Factory throttle body
Tune: Not required per aFe
- 90mm bore replaces restrictive factory 80mm HEMI throttle body
- CNC-machined billet aluminum construction
- Swirl-inducing adapter aids mixture motion per aFe
- OEM electronics compatibility — no tune required per aFe
- Complete hardware and gaskets in the kit
The Scoop
Why this bundle? 3500 owners get the same +79 HP story: Momentum HD (51-72003), Ripp coils, E3.66, LARGE Bore-HD 4" cat-back, and 90mm TB — five parts, one click, tuned for one-ton 5.7L Hemi trucks in the 2002–2010 window.
What’s included? aFe Momentum HD Cold Air Intake System Pro DRY S Filter (51-72003), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.66, 8 included), aFe LARGE Bore-HD 4" 409 SS Cat-Back Exhaust System, and aFe 90mm Throttle Body Kit (46-39112). Confirmed for 2002–2010 Dodge Ram 3500 5.7L Hemi.
Towing with Stage 2? These are bolt-on breathing and ignition upgrades; always stay within OEM cooling, braking, and payload limits. The bundle improves engine efficiency and response under load.
On the 3500, the LARGE Bore-HD cat-back moves more exhaust than the stock muffler and tailpipe assembly, giving the 5.7L room to breathe when the truck is loaded.
Pair that with Momentum HD, 90mm throttle body, Ripp coils, and E3.66 plugs for the full +79 HP Stage 2 story curated by FastHemis.
One-Click Stage 2 Kit: 2011–2018 Ram 1500 3.6L V6
aFe Momentum GT Cold Air Intake System Pro DRY S Filter
Part: 51-72102
Filter: Pro DRY S
Design: Momentum GT sealed housing
Application: Pentastar 3.6L Ram 1500
- Momentum GT sealed system for 3.6L Pentastar Ram 1500
- Pro DRY S filter — no oiling, easy service
- One-piece housing reduces hot underhood air ingestion
- Direct-fit for the V6 truck platform in this bundle
- First leg of Stage 2 airflow with BBK 78mm TB and MACH cat-back
Ripp Performance Coil Packs
Part: 1118CPK36
Set: 6 coil packs
Engine: 3.6L Pentastar
Install: Plug-and-play
- 1118CPK36 engineered for 3.6L Pentastar trucks and SUVs
- More spark energy per event vs. stock coils for stronger combustion
- State-of-the-art winding and materials per Ripp
- Six-pack set for the V6 — plug-and-play install
- CARB EO D-705-2 on applicable V6 coil applications per Ripp
E3 Spark Plugs
Part: E3.82
Qty: 6 plugs included
Gap: Pre-gapped, fixed
Tech: DiamondFIRE electrode
- DiamondFIRE technology for Pentastar V6
- Six plugs included for 3.6L in this bundle
- Pre-gapped fixed-gap for consistent combustion
- Improved efficiency and throttle feel vs. stock plugs
- Matched to Ripp 1118CPK36 coils in the Stage 2 package
aFe MACH Force-Xp 3" 409 SS Cat-Back Exhaust System Black Tip (REAR)
Part: 49-42031-B
Pipe: 3" 409 stainless cat-back
Tips: Black tip, rear exit
Design: MACH Force-Xp
- MACH Force-Xp 3-inch 409 stainless cat-back
- Black tip, rear exit — clean OE+ look
- Improved flow vs. stock for Pentastar truck exhaust
- Mandrel bends preserve cross-section through the bends
- Pairs with BBK throttle body for balanced intake/exhaust upgrades
BBK Performance 78MM Throttle Body
Part: 1841
Bore: 78mm
Gain: ~35% airflow vs. stock 73–74mm
Drive-by-wire: Modern gear assembly per BBK
- 78mm bore — ~35% more airflow potential vs. stock 73–74mm
- CNC-machined 356 aluminum castings
- Drive-by-wire gear assemblies per BBK instructions
- Simple bolt-on for Pentastar Ram 1500
- May require short pedal relearn per BBK (follow instructions)
The Scoop
Why this bundle? Pentastar 1500 owners see +74 HP with Momentum GT (51-72102), Ripp 1118CPK36 coils, E3.82 plugs, MACH Force-Xp cat-back (49-42031-B), and BBK 78mm TB (1841). It is the full V6 Stage 2 path with a cat-back and larger throttle body.
What’s included? aFe Momentum GT Cold Air Intake System Pro DRY S Filter (51-72102), Ripp Performance Coil Packs (1118CPK36, 6-pack), E3 Spark Plugs (E3.82, 6 included), aFe MACH Force-Xp 3" 409 SS Cat-Back Exhaust System Black Tip (REAR) (49-42031-B), and BBK Performance 78MM Throttle Body (1841). Confirmed for 2011–2018 Ram 1500 3.6L V6.
Do I need a pedal relearn on the BBK throttle body? Follow BBK’s drive-by-wire instructions — many Pentastar installs use a short relearn procedure after the swap.
The MACH Force-Xp black-tip cat-back gives Pentastar 1500 owners a purposeful exhaust note and freer flow, while the BBK 78mm throttle body opens the inlet to match the aFe intake.
Ripp 1118CPK36 coils and E3.82 plugs ensure each cylinder lights off cleanly — +74 HP combined on the V6 with no tune in the bundle recipe.
One-Click Stage 2 Kit: 2011–2018 Ram 1500 5.7L Hemi
AFE Momentum GT PRO Intake System
Part: 54-72102
Line: Momentum GT PRO
Filter: Pro 5R / PRO series (per listing)
Application: 2011–2018 Ram 1500 5.7L
- Momentum GT PRO intake path for 2011–2018 Ram 1500 5.7L
- High-flow filter media and sealed housing vs. open-element heat soak
- Dyno-oriented aFe engineering for modern HEMI trucks
- Uses factory mounting points for straightforward install
- Feeds the 90mm throttle body in this Stage 2 kit
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Up to ~+20 HP potential on 5.7L
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.68
Qty: 8 plugs included
Gap: Pre-gapped, fixed
Tech: DiamondFIRE electrode
- DiamondFIRE electrode improves combustion efficiency
- Strong throttle response and fuel economy benefits vs. worn plugs
- Pre-gapped; eight plugs included for HEMI V8
- 14mm thread application per E3.68 charting
- Emissions-neutral maintenance upgrade inside the bundle
aFe MACH Force-Xp 3" 409 SS Cat-Back Exhaust System Black Tip (REAR)
Part: 49-42031-B
Pipe: 3" 409 stainless cat-back
Tips: Black tip, rear exit
Design: MACH Force-Xp
- MACH Force-Xp 3-inch 409 SS cat-back with black tip
- Rear-exit layout suited to crew/quad cab 1500 trucks
- Stronger sound and flow than the stock muffler assembly
- Complete hardware for bolt-on installation
- Natural halo exhaust for this 5.7L Stage 2 story
AFE 90MM Throttle Body
Part: 46-39107
Bore: 90mm billet
Replaces: Factory 80mm
Tune: Not required per aFe
- 90mm aFe POWER unit replaces factory 80mm on late HEMI
- Billet aluminum body with OEM connector
- Opens the inlet to support intake + exhaust upgrades
- No PCM flash required for typical bolt-on use per aFe
- Finishes the Ram 1500/HD HEMI Stage 2 intake path
The Scoop
Why this bundle? 2011–2018 Ram 1500 5.7L nets +74 HP with Momentum GT PRO (54-72102), Ripp MV8-CPK, E3.68, MACH cat-back (49-42031-B), and aFe 90mm (46-39107). This is the modern half-ton HEMI Stage 2 package with black-tip exhaust.
What’s included? AFE Momentum GT PRO Intake System (54-72102), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.68, 8 included), aFe MACH Force-Xp 3" 409 SS Cat-Back Exhaust System Black Tip (REAR) (49-42031-B), and AFE 90MM Throttle Body (46-39107). Confirmed for 2011–2018 Ram 1500 5.7L Hemi.
What sound does the MACH cat-back give? Expect a deeper, more assertive note than stock under throttle with a clean rear-exit black tip — aFe tunes these systems for truck applications.
MACH Force-Xp on the 2011–2018 5.7L 1500 delivers a truck-appropriate sound and improved flow behind the cats, complementing the Momentum GT PRO intake and 90mm throttle body.
Ripp MV8-CPK and E3.68 plugs complete the ignition path for +74 HP combined — a true half-ton HEMI Stage 2 package.
One-Click Stage 2 Kit: 2011–2018 Ram 2500 5.7L Hemi
aFe Momentum HD Cold Air Intake System Pro DRY S Filter
Part: 51-72004
System: Momentum HD Pro DRY S
Application: 2011–2018 Ram 2500 5.7L
Housing: HD roto-molded airbox
- Momentum HD for 2011–2018 Ram 2500 5.7L Hemi
- Pro DRY S filter for low maintenance and strong filtration
- HD roto-molded housing for work-truck environments
- More airflow headroom for towing and grades
- Stacks with Flowmaster cat-back and 90mm TB
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Up to ~+20 HP potential on 5.7L
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.68
Qty: 8 plugs included
Gap: Pre-gapped, fixed
Tech: DiamondFIRE electrode
- DiamondFIRE electrode improves combustion efficiency
- Strong throttle response and fuel economy benefits vs. worn plugs
- Pre-gapped; eight plugs included for HEMI V8
- 14mm thread application per E3.68 charting
- Emissions-neutral maintenance upgrade inside the bundle
Flowmaster Flow FX Cat-Back Exhaust System
System: Flowmaster Flow FX Cat-Back
Pipe: Mandrel-bent 3.5" to 3" (per Flowmaster listing)
Tips: Dual 4" black stainless
Install: Bolt-on, factory hangers
- Flowmaster Flow FX cat-back with mandrel-bent piping
- Dual 4-inch black stainless tips for a modern truck look
- Balanced exterior sound without punishing highway drone
- Uses factory hanger locations for easier install
- Unlocks exhaust flow behind the 5.7L HEMI under load
AFE 90MM Throttle Body
Part: 46-39107
Bore: 90mm billet
Replaces: Factory 80mm
Tune: Not required per aFe
- 90mm aFe POWER unit replaces factory 80mm on late HEMI
- Billet aluminum body with OEM connector
- Opens the inlet to support intake + exhaust upgrades
- No PCM flash required for typical bolt-on use per aFe
- Finishes the Ram 1500/HD HEMI Stage 2 intake path
The Scoop
Why this bundle? The 2011–2018 Ram 2500 5.7L bundle is +74 HP: Momentum HD (51-72004), Ripp MV8-CPK, E3.68, Flowmaster Flow FX cat-back, and 90mm TB (46-39107). Flowmaster brings a classic American exhaust note to HD Hemi trucks.
What’s included? aFe Momentum HD Cold Air Intake System Pro DRY S Filter (51-72004), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.68, 8 included), Flowmaster Flow FX Cat-Back Exhaust System, and AFE 90MM Throttle Body (46-39107). Confirmed for 2011–2018 Ram 2500 5.7L Hemi.
Is the Flowmaster system the right choice for towing? Flowmaster targets a balance of exterior sound and daily drivability — if you need maximum quiet, ask FastHemis about alternate listings before purchase.
Flowmaster Flow FX brings the classic Flowmaster attitude to the 2011–2018 Ram 2500 5.7L: mandrel-bent pipes, dual black tips, and a sound profile that wakes up the Hemi without a full custom exhaust shop bill.
With Momentum HD intake, 90mm TB, Ripp coils, and E3.68 plugs, you are getting +74 HP combined bolt-on power for HD truck duty.
One-Click Stage 2 Kit: 2011–2018 Ram 2500 6.4L Hemi
AFE Momentum GT Cold Air Intake
Part: 54-72103
Line: Momentum GT
Application: 6.4L 392 HD Ram
Filter: High-flow media per aFe
- Momentum GT tuned for 6.4L 392 airflow in HD Ram trucks
- Supports the higher demand of the 6.4L vs. 5.7L intake tract
- Sealed airbox strategy for consistent IAT control
- Premium aFe fit and finish for long-term durability
- Leads the five-piece Stage 2 package for 2500 6.4L
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Stronger spark for 6.4L HEMI
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.74
Qty: 16 plugs included
Thread: 14mm, 1.000" reach
Tech: DiamondFIRE electrode
- DiamondFIRE design for modern 6.4L HEMI demands
- Sixteen plugs included for 6.4L HEMI applications in this bundle
- 14mm thread, 1.000-inch reach, taper seat
- Faster, more complete combustion vs. tired factory plugs
- Pairs with Ripp coils for maximum spark energy delivery
aFe Rebel Series 3.5" 409 SS Cat-Back Exhaust Polished Tips (REAR)
Part: 49-42057-P
Pipe: 3.5" 409 stainless Rebel Series
Exit: Dual polished tips (middle-side / REAR per name)
Design: Aggressive HD truck presence
- aFe Rebel Series 3.5-inch 409 SS with polished tips
- Distinct HD truck presence — dual tip layout per listing
- Improved exhaust flow for the 6.4L HEMI
- 409 stainless construction with polished 304 tip finish
- Middle/side-exit aesthetic vs. plain stock rear tip
AFE 90MM Throttle Body
Part: 46-39107
Bore: 90mm billet
Replaces: Factory 80mm
Tune: Not required per aFe
- 90mm aFe POWER unit replaces factory 80mm on late HEMI
- Billet aluminum body with OEM connector
- Opens the inlet to support intake + exhaust upgrades
- No PCM flash required for typical bolt-on use per aFe
- Finishes the Ram 1500/HD HEMI Stage 2 intake path
The Scoop
Why this bundle? 6.4L 2500 owners get +76 HP: Momentum GT (54-72103), Ripp MV8-CPK, E3.74 (16 plugs), Rebel Series cat-back (49-42057-P), and 90mm TB. The Rebel exhaust is the halo piece with polished tips and HD presence.
What’s included? AFE Momentum GT Cold Air Intake (54-72103), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.74, 16 included), aFe Rebel Series 3.5" 409 SS Cat-Back Exhaust Polished Tips (REAR) (49-42057-P), and AFE 90MM Throttle Body (46-39107). Confirmed for 2011–2018 Ram 2500 6.4L Hemi.
Why sixteen spark plugs? The 6.4L HEMI uses two plugs per cylinder — this bundle includes the full E3.74 set as spec’d on the FastHemis product page.
The Rebel Series polished-tip cat-back is the visual and sonic centerpiece for 6.4L 2500 Stage 2: 3.5-inch 409 stainless, distinctive tip layout, and improved flow for the 392 HEMI.
Momentum GT, sixteen E3.74 plugs, Ripp MV8-CPK, and the 90mm throttle body stack airflow and spark for +76 HP combined on the heavy-duty platform.
One-Click Stage 2 Kit: 2011–2018 Ram 3500 6.4L Hemi
AFE Momentum GT Cold Air Intake
Part: 54-72103
Line: Momentum GT
Application: 6.4L 392 HD Ram
Filter: High-flow media per aFe
- Same Momentum GT intake platform as 2500 6.4L — tuned for 3500
- High-flow path for the 392 in a one-ton chassis
- Sealed housing reduces heat-soaked air at the filter
- Direct-fit curated pairing in this FastHemis bundle
- Opens the inlet to match Rebel exhaust and 90mm TB
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Stronger spark for 6.4L HEMI
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.74
Qty: 16 plugs included
Thread: 14mm, 1.000" reach
Tech: DiamondFIRE electrode
- DiamondFIRE design for modern 6.4L HEMI demands
- Sixteen plugs included for 6.4L HEMI applications in this bundle
- 14mm thread, 1.000-inch reach, taper seat
- Faster, more complete combustion vs. tired factory plugs
- Pairs with Ripp coils for maximum spark energy delivery
aFe Rebel Series 3.5" 409 SS Cat-Back Exhaust Polished Tips (REAR)
Part: 49-42057-P
Pipe: 3.5" 409 stainless Rebel Series
Exit: Dual polished tips (per aFe Rebel HD)
Design: Built for 2500/3500 6.4L
- Rebel Series 3.5-inch 409 stainless cat-back
- Polished tips and aggressive styling for HD Ram
- Built for 2500/3500 6.4L HEMI per aFe application data
- Laser-etched aFe POWER tip branding
- Bolt-on from the catalytic converter back
AFE 90MM Throttle Body
Part: 46-39107
Bore: 90mm billet
Replaces: Factory 80mm
Tune: Not required per aFe
- 90mm aFe POWER unit replaces factory 80mm on late HEMI
- Billet aluminum body with OEM connector
- Opens the inlet to support intake + exhaust upgrades
- No PCM flash required for typical bolt-on use per aFe
- Finishes the Ram 1500/HD HEMI Stage 2 intake path
The Scoop
Why this bundle? The 2011–2018 Ram 3500 6.4L bundle mirrors the 2500 392 kit at +76 HP: same intake, coils, E3.74 x16, Rebel cat-back, and 90mm TB — curated for one-ton 6.4L trucks.
What’s included? AFE Momentum GT Cold Air Intake (54-72103), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.74, 16 included), aFe Rebel Series 3.5" 409 SS Cat-Back Exhaust Polished Tips (REAR) (49-42057-P), and AFE 90MM Throttle Body (46-39107). Confirmed for 2011–2018 Ram 3500 6.4L Hemi.
2500 vs 3500 exhaust fitment? Use the FastHemis bundle page notes for your VIN and build — aFe engineers Rebel systems for HD 6.4L applications with specific routing.
3500 6.4L trucks get the same Rebel Series presence: polished stainless tips, aggressive routing, and better exhaust throughput than stock for towing and empty-bed driving alike.
The intake, dual-plug E3.74 set, Ripp coils, and 90mm TB round out +76 HP combined in one FastHemis SKU.
One-Click Stage 2 Kit: 2019–2024 Ram 1500 5.7L Hemi
AFE Momentum GT Red Edition Cold Air Intake System w/ Pro DRY S Filter
Part: 50-70013DR
Line: Momentum GT Red Edition
Filter: Pro DRY S
Application: DT 5.7L Hemi
- Momentum GT Red Edition for 2019+ DT Ram 1500 5.7L
- Pro DRY S filter with red-accent intake presence
- Replaces the factory restrictive inlet and tube
- Engineered for the newer 1500 engine bay layout
- Works with 90mm TB and MACH cat-back in this listing
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Up to ~+20 HP potential on 5.7L
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.68
Qty: 8 plugs included
Gap: Pre-gapped, fixed
Tech: DiamondFIRE electrode
- DiamondFIRE electrode improves combustion efficiency
- Strong throttle response and fuel economy benefits vs. worn plugs
- Pre-gapped; eight plugs included for HEMI V8
- 14mm thread application per E3.68 charting
- Emissions-neutral maintenance upgrade inside the bundle
aFe MACH Force-Xp 3" 409 SS Cat-Back Exhaust System Black Tip (REAR)
Part: 49-42031-B
Pipe: 3" 409 stainless cat-back
Tips: Black tip, rear exit
Design: MACH Force-Xp
- MACH Force-Xp 3-inch 409 SS cat-back, black tip
- Rear-exit design for DT-generation 1500 trucks
- Stronger sound profile than stock under acceleration
- Mandrel-bent tubing for consistent diameter
- Halo exhaust photo in the bundle showcase
AFE 90MM Throttle Body
Part: 46-39107
Bore: 90mm billet
Replaces: Factory 80mm
Tune: Not required per aFe
- 90mm aFe POWER unit replaces factory 80mm on late HEMI
- Billet aluminum body with OEM connector
- Opens the inlet to support intake + exhaust upgrades
- No PCM flash required for typical bolt-on use per aFe
- Finishes the Ram 1500/HD HEMI Stage 2 intake path
The Scoop
Why this bundle? DT Ram 1500 5.7L owners see +68 HP in this listing: Red Edition Momentum GT (50-70013DR), Ripp MV8-CPK, E3.68, MACH cat-back (49-42031-B), and 90mm TB. It updates the half-ton Stage 2 recipe for 2019–2024 trucks.
What’s included? AFE Momentum GT Red Edition Cold Air Intake System w/ Pro DRY S Filter (50-70013DR), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.68, 8 included), aFe MACH Force-Xp 3" 409 SS Cat-Back Exhaust System Black Tip (REAR) (49-42031-B), and AFE 90MM Throttle Body (46-39107). Confirmed for 2019–2024 Ram 1500 5.7L Hemi.
Does this fit eTorque or non-eTorque trucks? Confirm your exact 5.7L configuration with FastHemis — Ram changed ancillary components by model year and option package.
For 2019–2024 Ram 1500 5.7L, the MACH Force-Xp cat-back with black tip is the halo piece: 409 stainless, mandrel bends, and a modern DT-truck exhaust note.
Red Edition Momentum GT, 90mm TB, Ripp MV8-CPK, and E3.68 plugs deliver +68 HP combined in this listing — five curated parts, one checkout.
One-Click Stage 2 Kit: 2019–2026 Ram 2500 6.4L Hemi
aFe Momentum GT Cold Air Intake
Part: 50-70052D
Line: Momentum GT
Application: 2019+ Ram 2500 / 3500 6.4L
Design: Sealed housing, tuned tube
- Momentum GT 50-70052D for 2019+ Ram 2500 6.4L 392
- Large-surface filter and tuned tube for HD HEMI demand
- Sealed housing helps control intake air temps
- Pairs with Borla S-Type and 90mm throttle body
- One-click curated for the newer HD 392 platform
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Stronger spark for 6.4L HEMI
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.74
Qty: 16 plugs included
Thread: 14mm, 1.000" reach
Tech: DiamondFIRE electrode
- DiamondFIRE design for modern 6.4L HEMI demands
- Sixteen plugs included for 6.4L HEMI applications in this bundle
- 14mm thread, 1.000-inch reach, taper seat
- Faster, more complete combustion vs. tired factory plugs
- Pairs with Ripp coils for maximum spark energy delivery
Borla S-Type Cat-Back Exhaust System (Black Tip)
Part: 140851BC
Line: Borla S-Type Cat-Back
Material: T-304 stainless
Note: Fits cab/bed configs per Borla; excludes dual rear wheel
- Borla S-Type 140851BC with black tips
- T-304 stainless construction and mandrel-bent pipes
- Uses factory transition pipe between cats and muffler per Borla
- Fits common cab/bed configs; excludes dual rear wheel
- S-Type sound — performance tone with Borla quality
AFE 90MM Throttle Body
Part: 46-39107
Bore: 90mm billet
Replaces: Factory 80mm
Tune: Not required per aFe
- 90mm aFe POWER unit replaces factory 80mm on late HEMI
- Billet aluminum body with OEM connector
- Opens the inlet to support intake + exhaust upgrades
- No PCM flash required for typical bolt-on use per aFe
- Finishes the Ram 1500/HD HEMI Stage 2 intake path
The Scoop
Why this bundle? 2019–2026 Ram 2500 6.4L is +78 HP: Momentum GT (50-70052D), Ripp MV8-CPK, E3.74 x16, Borla S-Type (140851BC), and 90mm TB. Borla T-304 stainless and S-Type acoustics headline the exhaust side.
What’s included? aFe Momentum GT Cold Air Intake (50-70052D), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.74, 16 included), Borla S-Type Cat-Back Exhaust System (Black Tip) (140851BC), and AFE 90MM Throttle Body (46-39107). Confirmed for 2019–2026 Ram 2500 6.4L Hemi.
What about dual rear wheel trucks? Borla notes exclusions for DRW — verify cab, bed, and DRW status on the product page before checkout.
Borla S-Type 140851BC on the 2019–2026 Ram 2500 6.4L uses T-304 stainless, precision bends, and Borla’s S-Type tuning for a performance sound without sacrificing the quality expected on a $60K+ HD truck.
aFe Momentum GT intake, sixteen E3.74 plugs, Ripp MV8-CPK, and 90mm TB complete the +78 HP combined Stage 2 upgrade path.
One-Click Stage 2 Kit: 2019–2026 Ram 3500 6.4L Hemi
aFe Momentum GT Cold Air Intake
Part: 50-70052D
Line: Momentum GT
Application: 2019+ Ram 2500 / 3500 6.4L
Design: Sealed housing, tuned tube
- Same Momentum GT intake as 2500 6.4L for the 3500 392 platform
- Supports heavy towing and high-load intake demand
- Sealed system vs. open filters that ingest underhood heat
- Confirmed compatible set from FastHemis in one SKU
- Front half of the +78 HP Stage 2 equation
Ripp HEMI High Performance Coil Packs
Part: MV8-CPK
Set: 8 coil packs
Power: Stronger spark for 6.4L HEMI
Install: Plug-and-play
- Higher winding turn ratio increases spark energy vs. stock HEMI coils
- Up to ~+20 HP potential on 5.7L and stronger output on 6.4L platforms
- Epoxy-filled housings and quality materials for heat and vibration
- Direct bolt-on coil-on-plug replacement — no tuning required
- Eight-pack MV8-CPK set included in this bundle
E3 Spark Plugs
Part: E3.74
Qty: 16 plugs included
Thread: 14mm, 1.000" reach
Tech: DiamondFIRE electrode
- DiamondFIRE design for modern 6.4L HEMI demands
- Sixteen plugs included for 6.4L HEMI applications in this bundle
- 14mm thread, 1.000-inch reach, taper seat
- Faster, more complete combustion vs. tired factory plugs
- Pairs with Ripp coils for maximum spark energy delivery
Borla S-Type Cat-Back Exhaust System (Black Tip)
Part: 140851BC
Line: Borla S-Type Cat-Back
Material: T-304 stainless
Note: Fits cab/bed configs per Borla; excludes dual rear wheel
- Borla S-Type cat-back 140851BC (black tip)
- T-304 stainless for long life on work trucks
- CNC manufacturing for accurate fit per Borla
- Check cab/bed and DRW exclusions on the product page
- Completes the five-component bundle with Borla sound
AFE 90MM Throttle Body
Part: 46-39107
Bore: 90mm billet
Replaces: Factory 80mm
Tune: Not required per aFe
- 90mm aFe POWER unit replaces factory 80mm on late HEMI
- Billet aluminum body with OEM connector
- Opens the inlet to support intake + exhaust upgrades
- No PCM flash required for typical bolt-on use per aFe
- Finishes the Ram 1500/HD HEMI Stage 2 intake path
The Scoop
Why this bundle? 2019–2026 Ram 3500 6.4L matches the 2500 +78 HP bundle: same Momentum GT, coils, sixteen E3.74 plugs, Borla 140851BC, and 90mm TB — one-ton curated Stage 2.
What’s included? aFe Momentum GT Cold Air Intake (50-70052D), Ripp HEMI High Performance Coil Packs (MV8-CPK, 8-pack), E3 Spark Plugs (E3.74, 16 included), Borla S-Type Cat-Back Exhaust System (Black Tip) (140851BC), and AFE 90MM Throttle Body (46-39107). Confirmed for 2019–2026 Ram 3500 6.4L Hemi.
Same Borla as 2500? Yes — this SKU is shared across 2500/3500 6.4L in the listing; confirm DRW and cab/bed fitment with FastHemis for your VIN.
The same Borla S-Type system headlines the 3500 6.4L bundle: black tips, T-304 construction, and Borla fitment engineered around factory transition pipes (verify DRW exclusions).
With Momentum GT, Ripp coils, E3.74 x16, and 90mm TB, you get +78 HP combined — the one-ton version of the modern HD 392 Stage 2 kit.
Common Questions
Frequently Asked Questions
Do I need a tune for the Stage 2 bundle?
No. All five components in each Ram Stage 2 bundle are selected to work with the stock PCM. No tuning, no flashing, no ECU modifications. BBK 78mm throttle bodies on Pentastar bundles may use a short pedal relearn per BBK instructions; aFe 90mm HEMI throttle bodies are plug-and-play with no tune per aFe for typical bolt-on use.
Will the Stage 2 bundle void my factory warranty?
Under the Magnuson-Moss Warranty Act, a dealer cannot void your entire warranty for aftermarket parts alone. aFe intakes are 50-state legal where applicable; Ripp V6 coils carry CARB EO D-705-2. Exhaust and some performance parts may be restricted for street use in certain states — verify local law. Keep your stock components if you need to revert for service.
Why buy the Stage 2 bundle instead of parts individually?
The bundle is priced lower than buying each component separately, ships in one order, and every part is confirmed compatible with your Ram generation, engine, and the FastHemis listing notes. That matters on trucks where cab, bed, DRW, and emissions equipment change which cat-back and intake you need.
Can I install this myself?
Yes. Expect 3–6 hours total: intake, coils, and plugs (~2 hours), throttle body (~30 minutes), cat-back (~2–3 hours on a lifted HD truck). A lift or tall jack stands are strongly recommended. No wiring and no tuning for the HEMI 90mm path; follow BBK instructions for V6 pedal relearn if required.
What’s the difference between Stage 1 and Stage 2?
Stage 1 is intake, coils, and plugs. Stage 2 adds a performance cat-back and throttle body for higher combined gains — from +68 HP on 2019–2024 Ram 1500 5.7L up to +79 HP on classic 2002–2010 5.7L Hemi trucks in these listings, with +74 to +78 HP on the HD and mid-gen applications in between.
What comes after Stage 2?
Headers, high-flow mids, custom tuning, camshaft upgrades, or forced induction. Your Stage 2 foundation supports those steps — Ripp coils are boost-friendly, and the 90mm throttle body pairs well with many future HEMI modifications.
Ready for Stage 2 Horsepower?
Find the curated Stage 2 bundle for your Ram — half-ton or HD, V6 or HEMI. Five components, one click, one shipment, bolt-on gains with zero hassle.
